AutoCAD Inventor :: Modifying 3D Dimensions
May 23, 2012
Quick question...
Once a 3D object is drawn/completed in Inventor LT, how does one go back to the object to change the length/radius of certain objects without having to completely redrawn the object. For instance, imagine a bike wheel that is fully draw. Later perhaps one wants to go back to the wheel and adjust the radius of the spokes and the length. How does one do this quickly. In 2D I see how, but can this also be done in 3D with Inventor LT?
Working with... Autodesk: AutoCAD Inventor LT Suite 2013 | OS: Windows 7 | GC: ATI 6670 | Mem: 8 gigs RAM | Proc: Intel core i5 | Monitor: Acer V213HL
View 4 Replies
ADVERTISEMENT
Oct 23, 2012
My company is trying to Standardize all drawings produced to 1 format. the one we are attempting to create would be in the form of: nominal upper limit^lower limit. this is easily acheived in autocad and linear, chamfer, and hole/thread dimensions in inventor. but radii's and diameters from a round surface (as apposed to linear diameters) we have run into a snag with. We cannot seem to find a way to either remove the prefix symbols or be able to insert text between the symbol and tolerance.
below is a illistration of the problem and the form of the new dimensions.
View 4 Replies
View Related
Feb 21, 2013
For my dimension style, I have my text placement set to over dimension line, with leader, so I can drag the actual text outside the dimension line with a leader attached when necessary, but when I try to move the text outside of the dimension line it always draws the leader underlining the entire piece of text that I have moved. Is there a way to control the leader to attach to the middle of the line and not underline the entire piece of text when doing this operation?
View 3 Replies
View Related
Mar 16, 2012
I typically as much as possible like to insert my dimensions into my drawing from my model.
I created holes in the model as a 1/4" tapped hole
Yet when I show the dimensions in the drawing they show the minor dimension.
How do I get the 1/4" to show? I have selected the feature and still get these results.
View 8 Replies
View Related
Mar 22, 2013
I am trying to do a "quick and dirty" stopgap.
I am in the process of repairing and assembling the various systems for a luxury yacht - electrical, mechanical etc. The ultimate goal is to get a full 3D layout of parts and assemblies, then using tube and pipe and cable and harness to run conduits, aircon ducts, fuel lines....
All I have to go on are .dwgs
In the meantime I need to submit a modified .dwg to the engineers overseas to get the O.K. on swapping the order of certain components. All I need to do is change the labels text on the layout, nothing else.
I have imported the .dwg into an Inventor sketch and edited the text.
Now I am stuck. Placing the view into a new drawing shows nothing.
RMB export sketch as .dwg works, but not a single line of text shows, only the layout.
View 5 Replies
View Related
Aug 22, 2012
is there a way to lock the dimensions to aligned dimensions...or a key i could hold while dimensioning that would do that..
i have to dimensions a drawing where theres a lot of aligned dimensions to put and to do it manualy each time takes forever...
Product Design Suite 2013
View 9 Replies
View Related
Mar 15, 2012
I have a component pattern with 3 components in it and I need to remove one of the components from the pattern. How can I modify the pattern through the API? I have tried various things but I do not appear to be able to change the pattern.
View 1 Replies
View Related
Aug 11, 2012
I am using some code from the June 2010 "Mod the machine" posted by Brian Erkins.I keep getting an error in C# (express 2010), Please see attached screen dump.
I don't see any obvious difference in my code when compared to Brian's (in fact at one point I copied and pasted his code and still had the same error). Here is the
private void button1_Click(object sender, EventArgs e)
{
Inventor.Application invApp = null;
invApp = (Inventor.Application)System.Runtime.InteropServices.Marshal.GetActiveObject("Inventor.Application");
Inventor.Document doc = invApp.ActiveDocument;
Inventor.PropertySet customPropSet;
customPropSet = doc.PropertySets["Inventor User Defined Properties"];
View 1 Replies
View Related
Dec 4, 2013
A coworker of mine has made a bunch of custom extrusions, turned them into iParts, and published them to the Content Center. The parts are driven in length by the key parameter "Length". Unfortunately, he forgot to mark that "Length" parameter as export in the parameter dialogue before publishing. Is there ANY way to get that "Length" parameter to be exported so the Parts List can pull the cut length?
View 2 Replies
View Related
Oct 11, 2011
In my neverending battle to find a way to turn off unneeded components in an assembly, I'm trying my hand at modifying component visibility with a custom View Rep. View reps seemed to pose fewer issues than LOD's (in that you can have a drawing and model open at the same time without a million error messages)......until I tried to make a pattern.
When first placing a new subassembly component into an assembly, it will automatically place in the "Last Saved" View Rep. Since certain parts may be invisible in my "skeletal" subassembly, this is ideal. HOWEVER, when I try to pattern this subassembly, all of the occurrences absolutely insist on displaying at the "Master" View Rep. This makes no sense to me whatsoever and destroys yet another workflow at the 99% mark. I understand that I can change the view rep manually, but manual workarounds and corrections defeat the point of using iLogic to manipulate our models.
Am I the only CAD user who wants the simple ability to "turn off" an assembly component? iAssemblies are not an option due to the shear number of combinations of unneeded components.
View 4 Replies
View Related
Nov 25, 2011
I don't understand why my parts aren't updating when I put a hole through them on the assembly drawing? I would expect the part (.ipt file) to get updated with a hole through it when I save the assembly drawing, however it doesn't. Do I have to change a default setting or does inventor no do this?
View 1 Replies
View Related
Feb 22, 2012
I'm looking to add the name of the person printing the document as well as the date to any paper copies printed. However, since everythign is stored in Vault, this needs to be done without making any changes to the document that require saving the document.
Ideally this would be automatic(requiring no user input).
I've used both iLogic and built Inventor Addins before.
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
View 2 Replies
View Related
May 16, 2012
Where the properties browser settings are located so that I can turn the browser on for modifying parameter keys in factory layout? I actually had turned this browser on before, but now I cannot remember where they were. Please see the attachment for further info.
View 9 Replies
View Related
Oct 2, 2012
I'm experiencing many problems when modifying parts measures, adding extruxions or doing holes/threads.
Always same error: Operation doesn't produce a significant result. Redefine inputs
If Inventor is totally closed and reopened, I can modify and update parts without problems for 10-30 minutes, until first error, then it gives errors until closing again. Usually, but not always, operation preview begins to fail before first error. So it's quite difficult to reproduce.
I've tried uninstalling everything after Autodesk installation, windows updates and Firefox plugins (well, even Firefox itself) included. I've tried all hotfixes and updates that Inventor 2013 gives (NO SP1), even I've fully reinstalled Inventor. I've been using Inventor from Inventor 7 and never seen such errors.
I've attached a part from the pictures. Anyway, as errors are not always happening, maybe you won't have any problem with it.
PD: Also, a little problem is that with this Inventor version I can use the CTR+c CTRL+v to copy parts into an assembly. I can use the context menu but no shortkeys.
Autodesk Product Design Suite Premium 2013 (Installed yesterday, so with all official updates)
Windows 7 64bits Proffesional SP1
Intel(R) Xeon CPU W3565 @3.20GHz
NVIDIA Quadro FX 3800
8GB RAM
View 6 Replies
View Related
Aug 21, 2012
My parts list on my idw do not update when I make changes to the model. Specifically, I have deleted a bolted connection on my design and replaced with a different components but the parts list table does not update - all I see is a lightning bolt in the browser next to the parts list but I cannot update it here.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 2 Replies
View Related
Feb 11, 2013
I have a cylinder with an 18mm diameter.
I export my ipt to an stl (and I make sure that I click on options before I convert and make sure the units are in mm) yet the units are still off. I am using Inventor 2013.
It seems like most people were able to solve their problem by clicking on options but even that seems like it is not working for me.
View 5 Replies
View Related
Apr 3, 2012
All of the sudden after I sketch a rectangle i need 8 dimensions instead of 4. how do I get it back to only needing 4?
View 6 Replies
View Related
Dec 4, 2012
I was adding a lot of aligned dimensions to a drawing and some where along the way they changed from aligned dimensions to rotated dimensions, even in the same string of dimensions.
View 9 Replies
View Related
Sep 17, 2013
Is there any way I can make exploded dimensions in an old drawing become live dimensions again.
View 3 Replies
View Related
Sep 8, 2011
I have been reading here that the preferred mode of generating dimensions on the drawing views is by using "Retrieve" method.
My question is: how can I programatically add dimensions or measurements to the model so I can retrieve them in the drawing view? This has to be all done by code.
View 1 Replies
View Related
Feb 14, 2012
tmpApp.UnitsOfMeasure.GetStringFromType(Inventor.UnitsTypeEnum.kCentimeterLengthUnits)
returns "zentimeter"
Is there also a function which returns the unit sign "cm" ?
View 4 Replies
View Related
Apr 30, 2012
Is there actually a good reason why dimensions in IV are vectorless? If not, can we consider as a feature request? This gives me constant headaches in Inventor with my sketches and mates solving in unpredictable ways. I know I can use work planes as a work around, but it's a huge PITA.
View 2 Replies
View Related
Aug 21, 2011
I want to add dimensions in an assembly through VBA ,but all my work is just in vain . Now I can add dimensions one after another ,but I want to finish dimensioning in the assembly once for all .
View 1 Replies
View Related
Jan 25, 2012
I am dimensions moving around in my drawing files and I am trying to figure out why they do this. I change one little thing on my models, open the drawing, then spend 30 minutes going over every dimension in comparison to the old drawing trying to find all the ones that moved erratically and put them back where they were. Most of the dimensions that move don't have anything to do with the change I made to the model.
For example, the dimension in this picture used to be on the other side of the other extension line, and it was never that close to the geometry:
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
View 2 Replies
View Related
Nov 14, 2012
I have a part made by a former co-worker that appears to have some dimensions locked. The second feature on the attached file is a pair of rectangular cuts. I would like to edit the dimensions of the hole, but when I select a dimension I am unable to enter any numbers in the dialog box.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
View 5 Replies
View Related
Apr 9, 2009
Is there a way to break dimensions in Inventor like in Autocad? It automatically breaks around certain things, but I'm wondering if there is any way to control this.
View 7 Replies
View Related
Jan 31, 2012
I am trying to submit a bunch of parts to a machine shop and he needs them in a 2D format with dimensions and I don't know how to put them into that format.
View 7 Replies
View Related
Jun 26, 2013
How to get the Dimensions of the object using vb.net code.
View 1 Replies
View Related
Sep 12, 2012
Every time I take an assembly and make an idw, I also need to do a save copy as dwg. However when I do so, the dimensions of my assembly have changed.
View 7 Replies
View Related
Oct 28, 2012
I use autodesk inventor proffesional 11 and when I try to change the dimensions it dosent work.
View 3 Replies
View Related
Feb 19, 2013
in Autocad it was easy, in dimension style I could set up dimensions to be rounded to 5 ot 10 or any other value.I now need to set dimension to be rounded to 5mm (5, 10, 15, 20 .......). And I can not find a way to do that.
View 5 Replies
View Related
