I want to add dimensions in an assembly through VBA ,but all my work is just in vain . Now I can add dimensions one after another ,but I want to finish dimensioning in the assembly once for all .
View 1 RepliesI'm looking for an easy way to extract the information of max box dimensions (X, Y, Z).
When we want to send one part, or assembly all over the world, we need those dimension. I think, it is something that inventor already have it but not in an easy way like a phisical propertie that you can include in your BOM. Is this something for autodesk to implement?
I am trying to retrieve dimensions from an assembly. The features that I want were created in the assembly itself, not on the original parts in the assembly. I can manually dimension some of the features, but there are others that I need to retrieve. When I retrieve dimensions from the assembly, I am only given the original dimensions for the parts.
View 7 Replies View RelatedRecently when I have placed a view of an assembly into an idw drawing, then try to dimension distances between parts it gives me strange looking dimensions, or no dimensions at all. It looks as though the dimensions are going from the edges of each part at different angles, when I want them to be parallel to the view. I just want the dimension from a line to a line in that view as though it is 2d, but it is acting like it is still in 3d. I do not know if their is a setting that will change this or not.
I attached a screen shot of what the dimensions look like.
I have a automated ilogic model that is then used within a 2D drawing, this 2D drawing then has dimensions on it referenced to the the model.
This model changes in its length the dimension associated with its length then changes but the dimension text then goes outside of the dimension boundary (does not stay central). Is there any code that can scan the dimensions and in effect tidy them up?
I need converting imperial dimensions into metric in assembly as weell as part level sketches dimensions.
Any solution for converting all imperial dimensions to metric dimensions in whole assembly constraint level and as well as part level sketch dimensions. Any macros or any ilogic rules?
I typically as much as possible like to insert my dimensions into my drawing from my model.
I created holes in the model as a 1/4" tapped hole
Yet when I show the dimensions in the drawing they show the minor dimension.
How do I get the 1/4" to show? I have selected the feature and still get these results.
is there a way to lock the dimensions to aligned dimensions...or a key i could hold while dimensioning that would do that..
i have to dimensions a drawing where theres a lot of aligned dimensions to put and to do it manualy each time takes forever...
Product Design Suite 2013
I am using INV 2012 and I wan to to know a trick how to convert the weldment assembly back to regular assembly template.
View 1 Replies View RelatedI'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies View RelatedWe have an iLogic assembly with to parts in it. Maybe to cylindrical parts. The iLogic rules should do the following.
1. Start a Rule after open document.
2. This Rule starts a Rule in the first cylindrical component.
3. This Rule ask the user for a diameter.
4. The assembly gives this new parameter value to the second component
5. Then the assembly calls another rule in the second component to change it with the new parameter
Everything is working fine when the following combinations are taking place:
1. I open up the assembly out of vault or from a local drive or an accessible server drive
2. I insert the assembly as sub assembly in another assembly from a local drive or an accessible server drive
It don't work with the following situation:
- I insert the assembly as sub assembly in another assembly out of vault
Then the user becomes the dialog "Choose a diameter" twice.
I don't know why, but I have the idea it has something to do with the functionality of inventor to insert a component more than once. If you insert a component in an assembly Inventor gives you the opportunity to add more than one occurence after each other.
change that behaviour? Maybe a switch to change that inventor "add more than one occurence" behaviour.
I have encountered a problem with the Tube and Pipe styles.
As you can see, I have a rack assembly with a custom tube and pipe style. A wire as a tube in orange, and a tube support in white. Both have their seperate colorations at a style in the tube and pipe styles editor
When placing the rack assembly into the main assembly, it reverts to the coppor coloration I changed from the original style.
Steps I've taken:
Exported the styles .xml and Imported the styles into the master tubeandpipe.iam
Imported the user created .xml styles into the main assembly file nothing seems to work
I am trying to find the interior volume of an assembly (when am I not?!?!) by subtracting the assembly from a block that surrounds the most of it. Somewhere the assembly has a "leak" and I have been trying to use the Cross Section Analysis to track down where the inside lump is connected to the outside lump to be subtracted. Is there a less time consuming way to dynamically drag a plane across and get cross sectional views?
Even better is there a simple way to animate the analysis plane moving across the block so I can hopefully just watch and pause it when I find a leak?
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
it is possible to make a constraint that utilized a parameter of a part within the assembly.
For example, if I wanted to use the thickness of a plate, which I defined in the part, could I call that parameter in a constraint?
My assembly has grown (about 50 parts) to where I need to consolodate some parts into subassemblies for reuse and alternate iterations of the basic design.
When I import the original parts into a new assembly, all of the constrains I created are not there of course.
I've tried creating a new empty part and then deriving a new part from the assembly, but I can't add, delete or edit any parts.
I looked at using Shrinkwrap, Substitutes, iParts, Multi-body Parts, and Multiple Solids but I remain confused.
In retrospect, maybe I should have created the subassemblies between the part and assembly stage but I didn't.
I want to be able to control the location/position of a component in an assembly. This is easy enough through the iProperties/Occurrence tab and then adjust the location of the X,Y, and Z offsets. Is this possible using iLogic? I have been unable to find a function to access via iLogic. Ultimately I am trying to translate a component about an axis not a pattern.
View 1 Replies View RelatedCan I select a bunch of parts in an assembly and say "save these pieces as a new assembly"?
It is just such a needed tool but I cant find an easy way to accomplish this.
I have a two part duct fire damper assembly. The IDW has the combined two part assembly, which I know how to turn the CoG on, so that it can be dimensioned. The problem is each piece will more than likely be hoisted separately so I would like to show the CoG for each piece, not the combined master assy.is there a way to do this?
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
I would like to see if there is a routine that allows my iLogic code to detect if my assembly contains another assembly within it. If my assebly contains assemblies then I don't want "MyRule" to run. Else if it does then I want "MyRule" to run.
View 4 Replies View RelatedMy Assembly has two possible positions for my piston.
I would like to show both piston positions (top and bottom) in one drawing file; however, in different drawing views.
I have tried using LOD and Drawing View Representations, but it is my understanding that neither of these are meant to be used in this way.
I have a cylinder with an 18mm diameter.
I export my ipt to an stl (and I make sure that I click on options before I convert and make sure the units are in mm) yet the units are still off. I am using Inventor 2013.
It seems like most people were able to solve their problem by clicking on options but even that seems like it is not working for me.
All of the sudden after I sketch a rectangle i need 8 dimensions instead of 4. how do I get it back to only needing 4?
View 6 Replies View RelatedI was adding a lot of aligned dimensions to a drawing and some where along the way they changed from aligned dimensions to rotated dimensions, even in the same string of dimensions.
View 9 Replies View RelatedIs there any way I can make exploded dimensions in an old drawing become live dimensions again.
View 3 Replies View RelatedI have been reading here that the preferred mode of generating dimensions on the drawing views is by using "Retrieve" method.
My question is: how can I programatically add dimensions or measurements to the model so I can retrieve them in the drawing view? This has to be all done by code.
tmpApp.UnitsOfMeasure.GetStringFromType(Inventor.UnitsTypeEnum.kCentimeterLengthUnits)
returns "zentimeter"
Is there also a function which returns the unit sign "cm" ?
Is there actually a good reason why dimensions in IV are vectorless? If not, can we consider as a feature request? This gives me constant headaches in Inventor with my sketches and mates solving in unpredictable ways. I know I can use work planes as a work around, but it's a huge PITA.
View 2 Replies View RelatedI am dimensions moving around in my drawing files and I am trying to figure out why they do this. I change one little thing on my models, open the drawing, then spend 30 minutes going over every dimension in comparison to the old drawing trying to find all the ones that moved erratically and put them back where they were. Most of the dimensions that move don't have anything to do with the change I made to the model.
For example, the dimension in this picture used to be on the other side of the other extension line, and it was never that close to the geometry:
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
I have a part made by a former co-worker that appears to have some dimensions locked. The second feature on the attached file is a pair of rectangular cuts. I would like to edit the dimensions of the hole, but when I select a dimension I am unable to enter any numbers in the dialog box.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
Quick question...
Once a 3D object is drawn/completed in Inventor LT, how does one go back to the object to change the length/radius of certain objects without having to completely redrawn the object. For instance, imagine a bike wheel that is fully draw. Later perhaps one wants to go back to the wheel and adjust the radius of the spokes and the length. How does one do this quickly. In 2D I see how, but can this also be done in 3D with Inventor LT?
Working with... Autodesk: AutoCAD Inventor LT Suite 2013 | OS: Windows 7 | GC: ATI 6670 | Mem: 8 gigs RAM | Proc: Intel core i5 | Monitor: Acer V213HL
Is there a way to break dimensions in Inventor like in Autocad? It automatically breaks around certain things, but I'm wondering if there is any way to control this.
View 7 Replies View Related