AutoCAD Inventor :: IPN View Not Shading Correctly
Sep 24, 2013
I have an IPN exploded assembly in an idw file. The individual parts were created in a multibody solid and sent out to and assembly using the "make components" command. My normal way of working is to leave the source part with appearance sent to "default". One the bodies are sent out to individual parts i manipulate material and appearance in the individual IPT files.
This is the problem..
The IPN file looks fine with the correct appearances when i open the IPN file. However, the iso view to the IPN in the IDW file does not shade correctly. It appears to shade all parts in the original gray "default" appearance.
The idw with the linked files are about 7MB after packngo and zip. Attach won't work. Please provide alternate means to transmit file. In the mean time the best i can do is screenshots
View 9 Replies
ADVERTISEMENT
Oct 16, 2012
“Basic assembly” is not drawn correctly in the section view,In the screenshot below, the “Basic assembly” is not drawn correctly in relation to the existing ground.What might be the reason that it is not closed with the existing ground?
View 5 Replies
View Related
Sep 12, 2012
I do need to display the correct surface side to varify if any surface normal is wrong sided. But all the time surfaces are displayed in the force 2-sided mode, although the setting is off. I use the Nitrous driver but tested it also on all other drivers whithout success. Older 3dmax versions doesn't have had this problem on the same machine. See the attachment where I added the renderer where the object is displayed correctly. How can I get the result within the viewport?
View 1 Replies
View Related
Jun 21, 2013
Is there a way to get sheet number of the base view for the Selected Child view (Mainly for Section. Detail Views). Because the Section views, Detail views (initially they would have created on the same sheet where the parent is, then they moved to different sheets). So we place the parent view sheet number.
View 1 Replies
View Related
Jun 27, 2012
I started with a Left side view of a part and created a sectioned view right down the middle so you can see the insides from another view. the part is pretty big so i used a Break to shorten it to fit the page. I also placed a smaller and separate isometric view of the same part and want this view to inherit the same break. How can I do this? If I go into the display options of the iso view, all the cut inheritance options are grayed out and can't be clicked. I've seen this done before, but i'm sure i missed a step somewhere.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
View 4 Replies
View Related
Sep 23, 2013
I made a drawing, but after using ilogic (ilogic is in drawing,assembly, part) in it, drawing view of a particular part is coming in hidden line, other are shaded as u can see in image.
Drawing view is associative, all edges shown, level of detail is master, view style is Hidden Line Removal with Shaded
Computer Config:
Inventor 2013
Intel Xeon CPU
2.67 GHZ
8 Gb ram
Windows 7 64 bit
View 3 Replies
View Related
Oct 30, 2013
I am trying to cut sections using Inventor I will begin by saying I am a fairly new user. On numerous occasions I am running into an issue where the section cuts are not shown correctly? I have attached an image showing an example of what I am talking about, you can clearly see that there are bolts and plates that should be displayed in the section cut which is shown above.
View 6 Replies
View Related
Oct 12, 2012
I am working on a sheet metal tee and i am having a problem with the Rip feature on this particular piece. I am not understanding why it will not rip all the way through this part.
Part was created with Inventor 2013
View 4 Replies
View Related
Dec 20, 2011
I am using a form to make the changes in the assembly, but when I change body styles ( 1 piece to 2 piece) it is not updating correctly unless I regen the rule. It is having trouble with the 2nd body piece. It doesn't want to change it unles I do a regen.
View 8 Replies
View Related
Jul 4, 2012
I have found a couple of times now a problem with Parameters not updating correctly. Last Tuesday (26/06/2012) I logged a call with the VAR and they are yet to contact me about the problem. In the past when I found the same thing, a different VAR made excuses about not using the most current software as I developed the model on IV2010. The Parametric model made use of VBA and Skeletal modelling and the VAR made excuses along the lines of we weren't running the most current software, didn't make use of iLogic and since I was using VBA and did not pay for the code checking service the problem for them disappeared as they were going to do no more. When we finally upgraded to IV2012 and the problem still existed they consequently chose the excuse of my VBA code being the problem, consequently I then created a simple rule in iLogic and demonstrated the problem that way.
To summarize, the model is a Parametric Skeletal assembly, it utilizes VBA for a user interface. The problem existed in IV2010, IV2011, IV2012 and IV2013. There are pictures attached to show the problem.
View 9 Replies
View Related
Oct 7, 2013
I'm getting unexpected results using "round( )" in the parameters table. File attached (Inventor 2014). Details below.
width = 35.125
end_result = round(width)
Nominal value for "end_result" is 35.039370. Why is this not rounding to exactly 35?
View 5 Replies
View Related
May 6, 2013
Is it possible to have the parent view for the section in one drawing and the child views in another drawing?
View 2 Replies
View Related
Apr 26, 2012
I've created a drawing and when I create a detail view, the actual view appears in the drawing but the circle and arrows along with the view identifier are not showing up. It's like the visibility has been turn off. how to turn it back on?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
View 1 Replies
View Related
Oct 31, 2013
I have made an exploded view and placed it an a drawing. I would like to view inside one of the bodies to show where the exploded internals sit, however when I do a break out of the body the trail lines from the exploded internals also get sectioned. Is there a way to control the sectional properties of a trail line?
View 4 Replies
View Related
Sep 27, 2013
After upgrading to Inventor 2014 we notice that the graphics do not work properly, and that the overall performance in drawings and modelling bad compared to 2013. Then we installed SP1 and now drawing views are disappearing, however when we select "shaded" view the view reappears and works perfectly..
Any workaround regarding disappearing views?
View 3 Replies
View Related
Oct 3, 2013
Sometimes when I try to create a detail view of an isometric view in my IDW, the "detail full boundary" option is greyed out? Why would this be? If I try an ortho view it works fine.
View 5 Replies
View Related
Dec 13, 2012
how to show section view in base view with out projection the component.
View 2 Replies
View Related
Oct 29, 2013
I have a long shaft with parts mounted on. i want to section it and show the parts. i don't need to show the whole length of the shaft.
I know i can crop the isometric view, but this way i will not see the key hole which is on the other side, it's hidden.
If i make a section it 's in an orthogonal view only.
I want to make the section view, but later to transform the sectioned view to an isometry. is it possible?
View 7 Replies
View Related
Mar 13, 2013
Is there a way to save a section view in the assembly as a view rep? Am using 2011.
View 9 Replies
View Related
Nov 25, 2008
Each time when I place a part in base view, have to follow few steps; go through view label, format Text, than choose type option - [Properties-Model] and its property - [Part Number], than placing dimensions. it takes long time and very repetitive, especially, when placing a hundreds of parts and I was wondering if there is an option, to set up view label; [Properties - Model ]& [Part number], as a DEFAULT. So, each time placing a part, in base view it will come up with correct label. Also, overall dimensions, can it be retrieve using parameters of the part?
View 4 Replies
View Related
Dec 13, 2011
I have a detail view of a groove on a cylinder. I want to dimension a diameter in which I only see one side, the other side is not in the detail view.
From some posts I see that I should auto insert a centerline then dimension from centerline then choose options "dimension linear".
First when I try to auto insert centerlines it does not insert the centerline for me. Perhaps because my detail is smaller. If I make the field for the detail view larger it makes a centerline, but I dont want to do that. I have tried making a sketch of the other side and the centerline. When I dimension from here I do not have the right click option of dimension linear, instead only arrowhead options.
Using Inventor Professional 2012
View 1 Replies
View Related
Oct 5, 2012
I´m having a couple of problems with getting data correctly from an Excel Sheet. I´m using the Excel Sheet to get Data for the Stock Number based on geometry.
First time the Excel File get´s opened it always cannot find the first sheet. I´m using a german Version and Sheet1 is Tabelle1 in german.
It always searches for sheet1 the first time the script runs on a new derived assembly. The second time (on second part) it correctly finds Tabelle1 and reads the correct value.Here is the code I´m using:
[code]
myXLS = "K:IdentNr.xls"
GoExcel.Open(myXLS)
i = GoExcel.FindRow(myXLS, "Tabelle1", "Stärke", "=", Stärke, "Material", "=", iProperties.Material)
IdentNr = GoExcel.CurrentRowValue("IdentNr")
iProperties.Value("Custom", "IdentNr") = IdentNr
[code]
And there is another issue which I have solved already but still gives me a bit of a headache. When the userdefined property IdentNr gets written into the part it always defaults to a numerical value, which means that I always get a comma at the end of the Stock Number.
Only when I define IdentNr like this:
Dim IdentNr As String
the format is correctly set to Text.I expected that when you read a value from an Excel Cell that the Format of the Cell gives the format of the user defined property. Is that not correct?
View 4 Replies
View Related
Sep 20, 2012
It doesn't happen very often (apparently, 8 days ago was the last time), but I would like to know more about this error.
The .png I've attached shows what happens more easily than I can describe it.
It only happens on Part1 (and possible Assembly1?). If I've made a new part and the menu loaded correctly, it won't load improperly on a later new part (, like Part2, Part 3, etc). It does not happen saved parts that I open. If I have other files open when this happens, the Manage menu seems to be correct in any file, but Part1. Closing IV and reopening has fixed it every time, but one. The time closing/reopening IV didn't fix it, I closed it again, and reloding IV again, the menu was fine.
The visible portions of the buttons work correctly, but the empty spaces where the icons for the button should appear, do nothing.
No other tab has done this.
View 7 Replies
View Related
Feb 14, 2013
Sometimes when a drawing is opened in Inventor, the complete design is not visible on the sheet. Only few lines appear on the view.
View 2 Replies
View Related
Mar 27, 2012
I have made a VB.Net Add-In for Inventor 2011, in a few functions it opens one or more files or sets a reference to already opened files. The release of the resource to this documents seems to be the problem.
In PDM (Productstream Pro) we want to change document states and there for the documents have to be closed in Inventor. When using some Add-In functions prior to the state change in PDM, we get a message from PDM that Inventor still has the files open but inventor does not show any open files (of course we can not see files that were opened in the background).
Only manual operation to solve this is to close inventor or open the drawing and the part used on the drawing and close them top down (drawing first, then part).
I'm stuck with open files that don't seem to be open.I think this is because the add-in sets a reference to the part used on the drawing and then changes something in the drawing.How do I release the resources correctly?
View 2 Replies
View Related
Nov 11, 2013
When you go to the Appearance Browser and go to our custom appearances, some of the thumbnails don't match what the appearance is actually set to. If you open up/edit the appearance it shows the correct appearance, but the thumbnail isn't displayed correctly.
View 7 Replies
View Related
Sep 17, 2013
I was already upgrade my laptop to windows 8.1 preview 64-bit,I have this only one error when was start my cad application autodesk inventor pro 2014 student version.
View 4 Replies
View Related
Nov 12, 2013
It's possible to do a cut view with the cup part with a different view style from the other "not Cut" half.
I achieve that, whit the cut view + normal view croped hover the cut view... but this isn´t a accurate process...
Autodesk Factory Design Suite Ultimate 2014
Autodesk Simulation Mechanical
Autodesk Simulation CFD
Windows 7
View 5 Replies
View Related
Aug 26, 2013
I place the first view in a drawing and want to be sectioned.
Is there a way to do that, since when i mark the section line, another view is created.
Or should i put the main view outside of the paper boundaries?
View 7 Replies
View Related
Oct 3, 2013
is it possible to create a detail view of an Iso view which is created with perspective camera? I tried it but it does not seem to let you have the option of selecting the connection line or detail view boundary?
View 5 Replies
View Related
Mar 24, 2011
I have a Crop View of a IAM and want/need a Projected View of the Crop View. When I select the Crop View as my base and then select try to create a Projected View, I get the whole IAM.
I guess one could use the Section View and eliminate all the items I don't need for my Base View.
IV2014 sp1.2 PDSU / Sim Mech 2014 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 331.82
SpacePilot Pro 3.17.1, 6.17.7, 4.11
View 3 Replies
View Related
