I have an iCopy solution that when resized smaller than the master some frame members no longer reference existing geometry (and aren't needed).
Is there a way to delete these with an iLogic rule? Curtis has a neat solution for sick constraints, I was hoping to use the same type of rule, but I'm at a loss as to how to reference the frame elements.
We have some serious problems by creating assembly drawings with reference geometries in inventor 2010. Our target is, to create a drawing that look the way, the attachment shows (Picture-1) The sheet metal plates Pos 10-100 are an assembly. And the assembly in the back is the reference geometry. It’s a frame consists of steel sections. What we want: 1. The frame must be phantom lined in the idw. 2.
The Sheet Metal parts must be thick lined. 3. The Partslist of the Assembly should only contain the sheet metal parts and not the frame We have some ideas to solve this case, but each of them is nor perfect (please see the attachment Box.pdf) And there’s another problem (described in part 3 of attachment), we cannot position viewports or drawing elements to each other exactly. You have no possibility to give them dependencies. Also if you want to position symbols to each other. All of them are only near to be exact, but that’s a big problem. If you change contents of a viewport, another should be aligned to it, but that doesn’t work.
In an assembly document, if you want to project a sketch from one part into another, you go through these steps:
- select the part
- edit the part
- create a 2D sketch
- select the plane
- select project geometry
- select the sketch in the other part
- finish sketch
This creates a reference to the original sketch, so if I move the original sketch the new sketch will also move when I hit Assemble.
I am trying to do the same through the API, so I create a proxy for the original sketch and a proxy for the new sketch. I then use the AddByProjectingEntity method on the new sketch proxy passing the original sketch proxy.
This works for projecting the sketch, but it doesn't create the reference, so if I move the original sketch the new one doesn't move, even if I hit Assemble. How to create this link between the two sketches?
I've come across this many times now. When in an assembly, I create a sketch. I then try to project geometry and I will sometimes get this error:
"Cannot constrain or dimension reference or fixed geometry."
why I can't project edges/faces/points of certain parts?
How can you force the geometry of reference parts to print behind to print behind your visible parts. I have my reference parts print out on a light gray layer to be shown indistinct on a drawings, but it prints over my object lines in effect hiding them. This is even true if a reference part is hidden. Then hidden line will print over the object lines as well.
View 4 Replies View RelatedI am having trouble with Iparts getting a red cross due to dimensions and constraints to unresolved reference geometry. If, for example, I have Hole 2 dimensioned from Hole 1 in one member and in another member I suppress Hole 1 and Hole 2 I get an error stating (correctly) that the sketch for Hole 2 has a "Dimension to unresolved reference geometry". I understand why I should get this error if Hole 2 was unsuppressed and Hole 1 was suppressed but why do I get this error when they are both suppressed.
If I get this error on a member that has these two holes suppressed and I switch back to a member that has them both active the error dissapears. I guess in the end this is a question for Autodesk. Can you set up Iparts so that when a feature is suppressed Inventor completely ignores it instead of still trying to resolve it. This functionality is a major headache for us because we don't want to leave models with the Red Cross on but if we want to dimension our features appropriately (ie referencing other, related features) we have to leave a model with errors in it.
See attached part. If you switch within the first 2 members there are no errors, if you move into the last 2 members you will see the cross highlight.
I am trying to place a simple Ifeature, its basically an offset from reference geometry but when I place the ifeature it offsets the feature the wrong side of the line.
View 3 Replies View RelatedUsing Inventor 2012 SP2
Have been using Inventor for 6 months or so after being on Solidowrks for many years.
With the settings I have from the start I have been avoiding using adaptivity because it causes more problems than it seems to fix. Just ran into this problem a few minutes ago.
Basic rect angle iron frame, put holes in them for fasteners. Created the cover and constrained it to the frame assembly. Used project geometry to locate all the holes in the frame onto the cover. Use the "Hole" feature and everything is good with the world.
Then changed the side pc of the frame, shortened it by 1.25 inches. Would not update until I deleted the cover and the fasteners. Even then I had to go thru all the constraints I used, edit them back to the number I had used. Once I did all that the frame was the correct size.
I must be missing something serious, it has to be easier than this to use adaptive parts.
is there a way to reconnect a frame member to a other sketch line? Lets say i've altered my sketch and delete a line to which a member was referenced. I get the error when rebuild the assembly.
When click change and select the said member i cannot select a new sketch line..
how to choose a frame to match existing photo size
View 1 Replies View RelatedI want to create a dynamic block from existing geometry using C#.
View 1 Replies View RelatedI'm running Map 2012 64 bit on Windows 7. I've connected to an sdf file through FDO. In the sdf file, it has points representing where people live. Some of the records have the person's information, but no point associated with it. Is there a way to add a point to an existing record through FDO? Typically, i'll create a new point, then re-enter all the data i need for that person and then delete the old record.
View 4 Replies View RelatedIs there an easy way to change all the model geometry from New to Existing in one easy command? I drew a three story building complete with structural columns, beasms, curtain walls, doors, walls, floors, etc. and I need to now make it all 'Existing'.
View 3 Replies View RelatedI have keyframed some ojects. I then set up a camera projection texture at keyframe 179
Is it possible to create a Texture Reference Object from keyframe 179 so this texture will stick to the geometry throughout the sequence?
Let's say that I make a nice volume of clouds, then just freeze it in a particularly good state. How do I go about it to reference that particular frame (only one cache file) across the entire animation?
Other plugins that can produce realistic clouds?
the possibility of displaying a random frame from the timeline in one of the views. Pure luxury if this was wipeable over the result! A lot of people ask for lustre, I would be happy enough with that "wipe" at the moment. CFX works fine for grading, but without reference..How are you dealing with this, is there a "secret button"?
View 4 Replies View RelatedAfter using Custom Profile for Frame Generator, the Part List will show total length, not individually. How to split these frame members?
View 2 Replies View RelatedI created an extruded aluminium profile (attached file: Item Profile 8 80x80) which I published into the Content Center. When using this profile in a frame design, and using the Trim To Frame command, the profiles are trimmed at a weird angle (attached pdf file).
View 2 Replies View RelatedAfter using Custom Profile for Frame Generator, the Part List will show total length, not individually. how to split these frame members?
Inventor Professional 2013 SP1.1
Windows 7 Pro 64-bit, SP1
HP EliteBook 8460w; 8 GB RAM; i7 - 2.0 GHz; AMD Firepro M3900 -1 GB
There should be a way to Notch a straight frame to a curved frame! I want to laser cut the tube, so I really need to trim one tube to a curve tube.
View 8 Replies View RelatedI come across this problem from time to time and generally either just ignore it, if the detail is destined for in house manufacture, or alter it in autocad if it's destined for exterior suppliers.
Our guard frames are manufactured from extruded aluminum section (made by a company called palletti) I have when needed created a new frame generator frame member for each new x-section that we wish to use. I then draw a 2d sketch for the base frame skeleton and then a 3d sketch for all the frame work above. This I then use in an assembly to create the framework. This framework assembly then goes into a second assembly where the framework is then adorned with all the accoutrements that make up a guard frame that we can then order as an assembled frame, panels feet, hinges et al.
When placing the views for the detailing of the second assembly sometimes the view will show the wrong length for one or some of the frame members.
;note how the left and right views are different and how some of the frame members are elongated on the lh view.
I'm guessing its because of the home grown frame members but all seems to work well other wise and this only happens infrequently.
HP z210 16Gb ATI FirePro5800
Autodesk Produst design Suite 2012
I have a five-frame animation to which I would like to add a background and I don't have enough GIMP knowledge to do it myself, so I've been trying to use the merge-anim script (URL...). When I use it under Debian Linux, with GIMP 2.6.10 (I have also tried it with GIMP 2.6.11 under Windows 7) however, it gives two error messages.
The first is "Plug-In 'Merge layer with others' left image undo in inconsistent state, closing open undo groups."
The second is "Error while executing script-fu-merge-anim: Error: not enough arguments."
The merge never does occur.The script doesn't have any real instructions and I haven't seen any anywhere else (just a number of example results that don't show the steps take), so my first attempt was with all the default values that came up and then other attempts were with changes to various options. None of them made any difference. The error messages were always the same and the script-fu console did not show any messages.
Do any of you know if this script, as old as it is, even still works with GIMP 2.6.10, or is it just a completely dead project that would only work with older versions of GIMP?
If it SHOULD work with GIMP 2.6.10 for Linux or GIMP 2.6.11 for Windows, what I should do to fix these errors and get it to work properly.
If there's no hope for the script, how DO I make a "background" layer the background for each frame of an existing animation. Also, if it makes any difference, the background I'm trying to use is a gradient created by GIMP.
I am trying to add a frame to some pictures, but when trying to apply a frame from the content section, the frame goes on top of any picture...and not directly on to the picture.
View 2 Replies View RelatedHow do I creat a frame inside a frame? Elements 4.0
View 2 Replies View RelatedHow in import 2D geometry into Inventor so I do not have to redraw the profile, only extrude the existing geometry. I tried to export from Autocad a IGES file, and then create a sketch plane in Inventor and project the geometry onto the sketch plane, but I ended up with a bunch of open loops. Perhaps, I have figured it out and real question is how to I close open loops?
View 6 Replies View RelatedI would like to be able to show an animation of a flat plate of material converging into a half hollow sphere (like a bowl). Its easy to model the beginning and end stae, but I do not know how to show it transitioning from one to the other.
How to do this? I need it for a presentation to convey a design concept.
I'm fairly new to the world of CAD, and I was just working on a phone case for my friend when I tried to extrude geometry text, but couldn't because the OK and Apply options were greyed out. I tried embossing and making a hole, but they were greyed out for them too. I tried messing with the settings to see if I could fix it, but I still couldn't. I'm really confused right now, I remember doing something similar for a case I made for myself.?
View 3 Replies View RelatedI have generated a model but want to get rid of unwanted geometry to clean it up, how do I delete unwanted geometry?
View 4 Replies View RelatedCurrently I save all my 2D DWGs as IGES files and then import the files into Inventor. That converts all the geometry to Construction Wires in an IPT, which means MUCH improved performance (you don't have to wait for Inventor to convert every single entity in the DWG to a Sketch entity). I then start a new Sketch and Project those lines that I need from the Construction Wires.
Is there a way to do this directly (convert to Construction Wires) with a DWG, without having to save as an IGES file first?
I have a sketch on plane XY and I have another plane at an angle, which I would like to work on. How can I create a sketch on the angled plane, using the geometry from the XY sketch and which I can snap to?
View 5 Replies View RelatedI want to slice a geometry partially. But not want to divide the geometry into two parts.
I attached a photo of a part. How can i draw this geometry by using Inventor?