AutoCAD Inventor :: Emboss In Assembly
Sep 20, 2012
Is there a way I can use the emboss feature in an assembly? We typically laser mark during final assembly and would like to show that as a step in the assembly instructions.
I typically create a sketch with the text and extrude(cut) in the assembly. It works fine for flat surfaces, but cannot do it for other surfaces.
The one way I can think of doing it would be creating ipart with text and using it in the assembly. I would rather not do it this way. Is there any other way to accomplish this with out altering the components (.ipt)?
View 7 Replies
ADVERTISEMENT
Aug 16, 2013
I have 2 separate sketches which will be used to EMBOSS on the curved surface.I can get them to work except i want 1 sketch to be Green when Embossed on the surface in color and the other sketch to be red in color when Embossed with the back ground Black.I can only get it to work as 1 color.I tried with Split command but still no luck.After both sketches EMBOSSED to the surface i can only get 1 color for both EMBOSS
View 1 Replies
View Related
Jan 11, 2012
In a part, I create a sketch, add annotation Type in the file name. Then create an Emboss feature using this sketch.
How can I add the file name property to the text. I want the the emboss to update to new file name if I rename the file.
View 3 Replies
View Related
Sep 18, 2011
How to emboss scale on the cylinder? Please see the file attached. The arrow is the portion I want to created in my part file.
View 9 Replies
View Related
Mar 13, 2013
I edited a sketch for an emboss to move the number over. But the resulting emboss still acts like I din not make the edit.
Inventor Suite 2013 Ultimate
View 8 Replies
View Related
Oct 2, 2012
The subject basically says it all. I am trying to emboss two words onto a solid model. Unfortunately it keeps failing. I am copying this model off of U-Tube models "LED LAMP"
Try and use the emboss feature and engrave the words "LED LAMP" On the centre of the top of my solid model part. Top View reads vertically going up the way.
Please edit part 8. Then start the Emboss process. 1/64 = Depth. Flat White colour. Following the video on youtube they use engrave from face then reverse the direction the arrow points towards the model. Then OK. That's the way I am showed it and I can't get it to engrave.
View 9 Replies
View Related
Aug 19, 2013
I'm trying to emboss a sketch to a lofted body. The same sketch is embossed perfectly on a flat/round/extruded/chambered body, but on this particular lofted body I get an error ("Thicken operation would result in a large topology change. Try with a smaller thickness"). I already tried with 0.01mm thickness and still not work. What could be the cause. (I'm using IV 2013)
View 4 Replies
View Related
Sep 3, 2012
I need to wrap some curve on a cylinder, after which i need to emboss the feature onto the cylinder.
I had sketches the curve and wrap it but was unable to emboss it to the cylinder.
Edited: I tried the boundary patch command. I was only managed to thicken/offset and then substract one patch with another one failed.
View 4 Replies
View Related
Oct 2, 2012
The subject basically says it all. I am trying to emboss two words onto a solid model. Unfortunately it keeps failing. I am copying this model off of U-Tube models "LED LAMP"
How to use emboss feature and engrave the words "LED LAMP" On the centre of the top of my solid model part. Top View reads vertically going up the way.
save it and send it back or explain why it keeps failing.
edit part 8. Then start the Emboss process. 1/64 = Depth. Flat White colour. Following the video on youtube they use engrave from face then reverse the direction the arrow points towards the model. Then OK. That's the way I am showed it and I can't get it to engrave.
View 4 Replies
View Related
May 3, 2011
I created an iPart which includes 10 or more different part. I need put the part number (text) on the surface (could use emboss or extrude). When I change the part, I need the embossed or extruded part number can be changed automatically.
View 4 Replies
View Related
Nov 20, 2013
I've attached the file (Inventor 2013). The sketch shown is a raised lip I'd like to have around a future opening. I actually want that sketch to wrap all the way around the body, but taper down to 0 in the rear as there are to be hinge plates. This is going to be a grill/smoker and there needs to be a 3/8" raised lip at the future seam of the top and bottom. Shown in the model is just the top portion.
View 8 Replies
View Related
Sep 24, 2013
I'm stuck on a few different emboss cases. The following examples are just dumbed-down models to learn from. If it matters - I'm actually embossing patterns on more complicated parts - not text on primitive shapes.
Case 1: Emboss across several surfaces. Please see attached file "Wrap Emboss 1". I can wrap to a face - but not all three faces on the solid that I want my "TEST TEST TEST" message to span across. My embossed text goes off into space - it doesn't wrap around the edge of the solid as desired.
Case 2: Emboss text (or some other arbitrary shape) onto a single (but compound) surface. Please see file "Compound Emboss 2". If the curvature of the part isn't significant - there are a few ways to fake/trick out the model to get a passable result. BUT - when the curvature of the surface is significant relative to size of the text/pattern to be embossed - I haven't yet found a solution that doesn't wildly distort the embossed feature. As the surface of the part is compound - I can't use the "Wrap to Face" option without an error. The resulting embossed feature is unacceptable.
View 7 Replies
View Related
Jul 21, 2013
I amrying to create embedding of a text entered through dialog box. The sketch regenerates fine but the Emboss doesn't. Cannot figure it out, tried a lot of different approaches...the text has to be configured this way - need to control it's height.
View 2 Replies
View Related
May 3, 2013
How to make a marking emboss on the green area?Because before make a emboss i can't make sketch in area that.
View 1 Replies
View Related
Apr 21, 2010
I would really like to put some text in the part that links to the iproperties so I can emboss the stock number on the parts. It never fails that you create a new part, then forget to change the text. This would save a ton of time and re-plots.
Inventor 2010
View 9 Replies
View Related
May 9, 2013
Is it possible to emboss multiple elements at once, without selecting each of them separately? I got over 2k elements on sketch which are needed to be embossed, it would be really pain to do it manually.
View 6 Replies
View Related
Sep 6, 2013
I am engraving a company logo on to the outside of a round tube with a custom font. There are two boxes of text that I am engraving. The first box works just fine with the "Emboss" tool. The second line works fine when the "% Stretch" parameter in the text edit window is left at 100%. When I change the "% Stretch" to 85%, I get the "Self-intersecting loop found in this profile" error message. I get this error message when I try stretching it to 115% as well. I changed the font to a standard font and I was able to emboss the text no matter the "% Stretch" value.
The bottom line is Inventor will not emboss text that has a custom font and a modified stretch percentage. This line of text must be stretched to match the company logo.
View 2 Replies
View Related
Aug 2, 2013
I'm playing around with a part that I'd like to "decorate" with embossed features or perhaps even cut-outs. The actual part, before adornments, looks like a funnel. As sketched now, I'm revolving a spline and then creating a thickened solid feature. I suppose that the variable diameter and varying cross sectional radius of my part increases the level of complexity of this task over a part that looks more like a regular cylinder. I'm hoping to learn a tecnique that will work for revolved parts with highly irregular profiles - not just plain ole cylinders.
So, what I'd like to do is emboss (negative or positive) and/or thru-cut decorative geometric or vine/flower inspired patterns into the outside face of a funnel-like part. (Pic attached.) I'm picturing some sort of pattern that might repeat around the part. (The variable diameter probably really complicates matters here.) I haven't put much effort/experimentation into this yet - pretty much because I'm a loss about where to even start.
View 9 Replies
View Related
Sep 26, 2012
Whenever I try and extrude or emboss my buisness Logo I get the error "The attempted operation did not produce a meaningful result"
I have attached file.
View 3 Replies
View Related
Oct 3, 2013
In Solidworks I can emboss a sketch into a 'wavy' surface without difficulty.
If I try to do the same thing with Inventors 'Emboss' command It fails with "Only planar, cylindrical or conical faces are supported."
Surely there must be a way to achieve the same effect as in the first illustration, in Inventor ? Am I missing something obvious?
View 9 Replies
View Related
Jun 6, 2012
I am using INV 2012 and I wan to to know a trick how to convert the weldment assembly back to regular assembly template.
View 1 Replies
View Related
Jul 10, 2012
I'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies
View Related
Sep 18, 2012
We have an iLogic assembly with to parts in it. Maybe to cylindrical parts. The iLogic rules should do the following.
1. Start a Rule after open document.
2. This Rule starts a Rule in the first cylindrical component.
3. This Rule ask the user for a diameter.
4. The assembly gives this new parameter value to the second component
5. Then the assembly calls another rule in the second component to change it with the new parameter
Everything is working fine when the following combinations are taking place:
1. I open up the assembly out of vault or from a local drive or an accessible server drive
2. I insert the assembly as sub assembly in another assembly from a local drive or an accessible server drive
It don't work with the following situation:
- I insert the assembly as sub assembly in another assembly out of vault
Then the user becomes the dialog "Choose a diameter" twice.
I don't know why, but I have the idea it has something to do with the functionality of inventor to insert a component more than once. If you insert a component in an assembly Inventor gives you the opportunity to add more than one occurence after each other.
change that behaviour? Maybe a switch to change that inventor "add more than one occurence" behaviour.
View 1 Replies
View Related
Feb 9, 2012
I have encountered a problem with the Tube and Pipe styles.
As you can see, I have a rack assembly with a custom tube and pipe style. A wire as a tube in orange, and a tube support in white. Both have their seperate colorations at a style in the tube and pipe styles editor
When placing the rack assembly into the main assembly, it reverts to the coppor coloration I changed from the original style.
Steps I've taken:
Exported the styles .xml and Imported the styles into the master tubeandpipe.iam
Imported the user created .xml styles into the main assembly file nothing seems to work
View 8 Replies
View Related
Apr 23, 2012
I am trying to find the interior volume of an assembly (when am I not?!?!) by subtracting the assembly from a block that surrounds the most of it. Somewhere the assembly has a "leak" and I have been trying to use the Cross Section Analysis to track down where the inside lump is connected to the outside lump to be subtracted. Is there a less time consuming way to dynamically drag a plane across and get cross sectional views?
Even better is there a simple way to animate the analysis plane moving across the block so I can hopefully just watch and pause it when I find a leak?
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
View 2 Replies
View Related
Oct 30, 2012
it is possible to make a constraint that utilized a parameter of a part within the assembly.
For example, if I wanted to use the thickness of a plate, which I defined in the part, could I call that parameter in a constraint?
View 1 Replies
View Related
Oct 31, 2011
My assembly has grown (about 50 parts) to where I need to consolodate some parts into subassemblies for reuse and alternate iterations of the basic design.
When I import the original parts into a new assembly, all of the constrains I created are not there of course.
I've tried creating a new empty part and then deriving a new part from the assembly, but I can't add, delete or edit any parts.
I looked at using Shrinkwrap, Substitutes, iParts, Multi-body Parts, and Multiple Solids but I remain confused.
In retrospect, maybe I should have created the subassemblies between the part and assembly stage but I didn't.
View 4 Replies
View Related
Nov 9, 2011
I want to be able to control the location/position of a component in an assembly. This is easy enough through the iProperties/Occurrence tab and then adjust the location of the X,Y, and Z offsets. Is this possible using iLogic? I have been unable to find a function to access via iLogic. Ultimately I am trying to translate a component about an axis not a pattern.
View 1 Replies
View Related
Nov 28, 2011
Can I select a bunch of parts in an assembly and say "save these pieces as a new assembly"?
It is just such a needed tool but I cant find an easy way to accomplish this.
View 2 Replies
View Related
Oct 3, 2013
I have a two part duct fire damper assembly. The IDW has the combined two part assembly, which I know how to turn the CoG on, so that it can be dimensioned. The problem is each piece will more than likely be hoisted separately so I would like to show the CoG for each piece, not the combined master assy.is there a way to do this?
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
View 5 Replies
View Related
Sep 3, 2013
I would like to see if there is a routine that allows my iLogic code to detect if my assembly contains another assembly within it. If my assebly contains assemblies then I don't want "MyRule" to run. Else if it does then I want "MyRule" to run.
View 4 Replies
View Related
