AutoCAD Inventor :: Unable To Emboss Stretched Text With Custom Font?
Sep 6, 2013
I am engraving a company logo on to the outside of a round tube with a custom font. There are two boxes of text that I am engraving. The first box works just fine with the "Emboss" tool. The second line works fine when the "% Stretch" parameter in the text edit window is left at 100%. When I change the "% Stretch" to 85%, I get the "Self-intersecting loop found in this profile" error message. I get this error message when I try stretching it to 115% as well. I changed the font to a standard font and I was able to emboss the text no matter the "% Stretch" value.
The bottom line is Inventor will not emboss text that has a custom font and a modified stretch percentage. This line of text must be stretched to match the company logo.
View 2 Replies
ADVERTISEMENT
Jul 21, 2013
I amrying to create embedding of a text entered through dialog box. The sketch regenerates fine but the Emboss doesn't. Cannot figure it out, tried a lot of different approaches...the text has to be configured this way - need to control it's height.
View 2 Replies
View Related
Apr 21, 2010
I would really like to put some text in the part that links to the iproperties so I can emboss the stock number on the parts. It never fails that you create a new part, then forget to change the text. This would save a ton of time and re-plots.
Inventor 2010
View 9 Replies
View Related
Jun 14, 2012
Is it possible to apply an emboss effect to a fountain filled font?
View 1 Replies
View Related
Jan 9, 2013
Is there a way to change the font color when using Custom Text in the print module?
View 3 Replies
View Related
Nov 21, 2013
In the Autodesk Inventor drawing (.idw) I am unable to change the font size when i dimension a hole and thread. I have tried going into "Edit Hole Note" and "Text" when you right click on the dimension.
View 3 Replies
View Related
Aug 22, 2012
It happens on both of my computers, with different licenses and CS versions (5.5 and 6).
View 5 Replies
View Related
May 20, 2013
I can not create a new pipe section. İn inventor 2013, at the tube and pipe style
I watched these steps . still not
[URL].......
[URL]........
[URL]........
View 5 Replies
View Related
Jun 28, 2010
I created a template part, turned it into an I-part and published it successfully as a Frame Member.
The custom member was published into a custom library that is read/write. I was forced to create this library in order to publish the part.
When I go to use the custom profile with the frame generator, I am able to find the custom member in the dialog but when the frame generator tries to generate the part, I get this error message:
[WARNING] Frame Generator: Errors occurred during inserting Frame Member(s)
[WARNING] Insertion of frame member(s) failed
[ERROR] A frame member could not be created. The template file for Unnamed GIRT-2 could not be located in the Content Center library.
View 9 Replies
View Related
Feb 26, 2012
Any solid shape just tend to go to the right no matter what angle you look at it and as it seems to go towards towards infinity . This is in orthographic view I might add. In perspective view the cube ends within the screen but it far from cubical and changes its appearance as you rotate it. As you can see in the pictures even the axis graphics down to the left is messed up.
Picture one is while I am extruding the 10mm cube. The big orange thing is the arrow used to drag up from the sketch.
Picture two is just the 10mm cube. As you can see the wire frame works just fine and it event hides the edges behind the solid.
I just installed the software on this computer so I suspect it is my graphics card that simply cannot handle the 3D solids. It is a few years old, a NVIDIA Quadro FX 540. The shadows does not work either, probably because I do not have shader model 2.0 or newer. do I have to scrap my computer?
View 1 Replies
View Related
Jul 29, 2013
Photoshop text is being stretched vertically. My text settings are at 100%.
View 1 Replies
View Related
Jan 28, 2012
I don't know what I did, but now when I open a text box and type in, the text looks stretched out sideways. Closing the file and closing GIMP doesn't work. When I open a pic and try to put text on it, it is still stretched.
View 2 Replies
View Related
Jun 3, 2012
trying put create text (or text saved as an image) in a distorted arch shape over top of an oval shaped image.
want text start as larger contract towards the middle and expand to the end.
all text flat on top and the curving would be along the bottom (to go over the oval shaped image).
[might also eventually want to make something similar (shape upside down of this one) to go along bottom of oval image.]
text would be in this bridge shape below:
Attached Thumbnails
View 10 Replies
View Related
Aug 16, 2013
I have 2 separate sketches which will be used to EMBOSS on the curved surface.I can get them to work except i want 1 sketch to be Green when Embossed on the surface in color and the other sketch to be red in color when Embossed with the back ground Black.I can only get it to work as 1 color.I tried with Split command but still no luck.After both sketches EMBOSSED to the surface i can only get 1 color for both EMBOSS
View 1 Replies
View Related
Sep 20, 2012
Is there a way I can use the emboss feature in an assembly? We typically laser mark during final assembly and would like to show that as a step in the assembly instructions.
I typically create a sketch with the text and extrude(cut) in the assembly. It works fine for flat surfaces, but cannot do it for other surfaces.
The one way I can think of doing it would be creating ipart with text and using it in the assembly. I would rather not do it this way. Is there any other way to accomplish this with out altering the components (.ipt)?
View 7 Replies
View Related
Jan 11, 2012
In a part, I create a sketch, add annotation Type in the file name. Then create an Emboss feature using this sketch.
How can I add the file name property to the text. I want the the emboss to update to new file name if I rename the file.
View 3 Replies
View Related
Sep 18, 2011
How to emboss scale on the cylinder? Please see the file attached. The arrow is the portion I want to created in my part file.
View 9 Replies
View Related
Mar 13, 2013
I edited a sketch for an emboss to move the number over. But the resulting emboss still acts like I din not make the edit.
Inventor Suite 2013 Ultimate
View 8 Replies
View Related
Oct 2, 2012
The subject basically says it all. I am trying to emboss two words onto a solid model. Unfortunately it keeps failing. I am copying this model off of U-Tube models "LED LAMP"
Try and use the emboss feature and engrave the words "LED LAMP" On the centre of the top of my solid model part. Top View reads vertically going up the way.
Please edit part 8. Then start the Emboss process. 1/64 = Depth. Flat White colour. Following the video on youtube they use engrave from face then reverse the direction the arrow points towards the model. Then OK. That's the way I am showed it and I can't get it to engrave.
View 9 Replies
View Related
Jul 31, 2013
how could I change all text-fonts from ISOCP to ISOCPEUR for all text-elemts in the drawing (in the frame, title etc.)?
View 2 Replies
View Related
Aug 19, 2013
I'm trying to emboss a sketch to a lofted body. The same sketch is embossed perfectly on a flat/round/extruded/chambered body, but on this particular lofted body I get an error ("Thicken operation would result in a large topology change. Try with a smaller thickness"). I already tried with 0.01mm thickness and still not work. What could be the cause. (I'm using IV 2013)
View 4 Replies
View Related
Sep 3, 2012
I need to wrap some curve on a cylinder, after which i need to emboss the feature onto the cylinder.
I had sketches the curve and wrap it but was unable to emboss it to the cylinder.
Edited: I tried the boundary patch command. I was only managed to thicken/offset and then substract one patch with another one failed.
View 4 Replies
View Related
Oct 2, 2012
The subject basically says it all. I am trying to emboss two words onto a solid model. Unfortunately it keeps failing. I am copying this model off of U-Tube models "LED LAMP"
How to use emboss feature and engrave the words "LED LAMP" On the centre of the top of my solid model part. Top View reads vertically going up the way.
save it and send it back or explain why it keeps failing.
edit part 8. Then start the Emboss process. 1/64 = Depth. Flat White colour. Following the video on youtube they use engrave from face then reverse the direction the arrow points towards the model. Then OK. That's the way I am showed it and I can't get it to engrave.
View 4 Replies
View Related
May 3, 2011
I created an iPart which includes 10 or more different part. I need put the part number (text) on the surface (could use emboss or extrude). When I change the part, I need the embossed or extruded part number can be changed automatically.
View 4 Replies
View Related
Nov 20, 2013
I've attached the file (Inventor 2013). The sketch shown is a raised lip I'd like to have around a future opening. I actually want that sketch to wrap all the way around the body, but taper down to 0 in the rear as there are to be hinge plates. This is going to be a grill/smoker and there needs to be a 3/8" raised lip at the future seam of the top and bottom. Shown in the model is just the top portion.
View 8 Replies
View Related
Sep 24, 2013
I'm stuck on a few different emboss cases. The following examples are just dumbed-down models to learn from. If it matters - I'm actually embossing patterns on more complicated parts - not text on primitive shapes.
Case 1: Emboss across several surfaces. Please see attached file "Wrap Emboss 1". I can wrap to a face - but not all three faces on the solid that I want my "TEST TEST TEST" message to span across. My embossed text goes off into space - it doesn't wrap around the edge of the solid as desired.
Case 2: Emboss text (or some other arbitrary shape) onto a single (but compound) surface. Please see file "Compound Emboss 2". If the curvature of the part isn't significant - there are a few ways to fake/trick out the model to get a passable result. BUT - when the curvature of the surface is significant relative to size of the text/pattern to be embossed - I haven't yet found a solution that doesn't wildly distort the embossed feature. As the surface of the part is compound - I can't use the "Wrap to Face" option without an error. The resulting embossed feature is unacceptable.
View 7 Replies
View Related
Aug 21, 2012
I'm trying to extrude some text with the font type "CommercialScript BT". In Inventor 2011 this was not a problem. In Inventor 2012 and 2013 I get the error:
Create extruded feature failed
Part4: Errors occurred during update
Extrusion3: Could not build this Extrusion
Self-intersecting loop found in this profile. Remove the intersection by adding a sketch point at curve intersections or by changing non-profile geometry to construction geometry.
Is there a way to solve this? I have tried to extrude other fonts without any problem. I can also extrude one single letter with the font "CommercialScript BT" without any problem but as soon as I writes a word I get the error.
Autodesk Product Design Suite Ulitmate 2012 Sp1 / Vault Collaboration 2012 Sp1
HP EliteBook 8560w
Intel(R)Core(TM) i7 CPU Q 720 @ 2,0GHz 2,0GHz
16GB RAM
Windows 7 X64 SP1
View 5 Replies
View Related
Jan 2, 2012
Inventor 2012.
How to make a macro that changes the font for a specific Text Style. The name of the Text Style is eg. "3mm", which I want to change from RomanS to Verdana.
View 1 Replies
View Related
Oct 8, 2013
I have never tried this before even tho I am an old hand at general photoshop use, ever since Version 3. Looking for an effect something like Google has. Not all the colors, just the neat pillowed emboss effect.
View 2 Replies
View Related
Dec 13, 2012
How to add an emboss effect to some text!?! I want to key this on top of a bg in batch.
View 1 Replies
View Related
Apr 18, 2012
Is there a way to give Bevel & Emboss effect to text in Illustrator, the same way like in Photoshop?
View 10 Replies
View Related
