I'm trying to emboss a sketch to a lofted body. The same sketch is embossed perfectly on a flat/round/extruded/chambered body, but on this particular lofted body I get an error ("Thicken operation would result in a large topology change. Try with a smaller thickness"). I already tried with 0.01mm thickness and still not work. What could be the cause. (I'm using IV 2013)
View 4 RepliesI edited a sketch for an emboss to move the number over. But the resulting emboss still acts like I din not make the edit.
Inventor Suite 2013 Ultimate
I am trying to edit a sketch in a multi body part file. While I am trying to edit, it displays all other solid bodies which is not required. How to switch them off displaying unnecessary solid bodies while editing a sketch?
View 6 Replies View RelatedCan I export a solid from a multi body part to an other part file. how?
View 1 Replies View RelatedHow can I convert a surface body in a solid body?
I attach my file.
I created this flange and I need to cut it from the extruded tube, but I'm having some trouble.
View 2 Replies View RelatedWhen creating a loft between two curves, I am not able to control the top and bottom portion of the surface created, I have joined a picture of the part and my IPT file with the problem I got.
View 9 Replies View RelatedIs Inventor able to provide information about the bending angle of a lofted pieces ?
I'm trying to loft a piece from square to circle. The bender ask me what is the angle of this pieces.
I have tried to do a lofted flange. It works, but there is an extra bend that I don't understand why it is there. The bends, I would assume, should be symmetrical but they are not. I have attached the part.
View 5 Replies View RelatedI've created a simple loft using a sketched circle and a fixed workpoint. The loft feature is a loft to a point, with a tangent condition set at the workpoint.
I'm looking for a nice smooth 'button' like feature. However, as you'll see in the screenshot there is an annoying 'seam' or 'join line' running from a point on the circular base to the workpoint.
The 'seam' does not display when the loft feature is set to "loft to point" condition.
why this is displayed and am I able to get rid of it?
I'm using Inventor Professional 2012 64 bit
I am currently working with an elliptic profile that needs to be unfolded. The part consists of two sketches, with each sketch having two ellipses. The ellipses on each sketch then forms a cross-section where the thickness of it is supposed to be 8 mm (the first ellipse is offsett).
My plan is then to generate a mold for the inner and outer sides of this part by using the "Lofted flange" function and Rip, since I want the flat pattern of it. However, I've found that I can not select my offset ellipse when using Lofted flange, only the original one. I'm thinking that this might be caused due to the offset ellipse not actually being an ellipse but a spline (I read somewhere that there are two ways of offsetting an ellipse. One generates a mathematical ellipse and the other a spline). Creating an new ellipse and then saying that the a and b distance should be 8 mm less than the other ellipse will work, but that will not give me a constant wall thickness of 8 mm along the circumference of the elliptic cross-section.
I am trying to create a loft to shaped a back cushion and then send the loft to all parts. But I do not see Loft as an option under assembly level.
View 5 Replies View RelatedI select the mirror command, but it will not select the lofted feature. All of the extruded features will select just fine.
View 5 Replies View RelatedLooking to developed the lay flat of a pan that has two different contours The small end must nest into the large end. The geometry for each end is in the attached file was draw in Auto-Cad and imported into inventor. Try to connect with lofted flange but only can select one piece of geometry at a time.
Tried to make them polyline's. {did not work} Do I need to create geometry in between them?
I have 2 separate sketches which will be used to EMBOSS on the curved surface.I can get them to work except i want 1 sketch to be Green when Embossed on the surface in color and the other sketch to be red in color when Embossed with the back ground Black.I can only get it to work as 1 color.I tried with Split command but still no luck.After both sketches EMBOSSED to the surface i can only get 1 color for both EMBOSS
View 1 Replies View RelatedIs there a way I can use the emboss feature in an assembly? We typically laser mark during final assembly and would like to show that as a step in the assembly instructions.
I typically create a sketch with the text and extrude(cut) in the assembly. It works fine for flat surfaces, but cannot do it for other surfaces.
The one way I can think of doing it would be creating ipart with text and using it in the assembly. I would rather not do it this way. Is there any other way to accomplish this with out altering the components (.ipt)?
I've created a shared sketch and have used it with various features. Sometime those features are suppressed. The model works fine but the shared sketch generates a sketch doctor error because the feature that created it has been suppressed. Is there anyway to make the sketch suppressed so it doesn't trigger a sketch doctor error? Inventor 2013
View 2 Replies View RelatedIn a part, I create a sketch, add annotation Type in the file name. Then create an Emboss feature using this sketch.
How can I add the file name property to the text. I want the the emboss to update to new file name if I rename the file.
How to emboss scale on the cylinder? Please see the file attached. The arrow is the portion I want to created in my part file.
View 9 Replies View RelatedThe subject basically says it all. I am trying to emboss two words onto a solid model. Unfortunately it keeps failing. I am copying this model off of U-Tube models "LED LAMP"
Try and use the emboss feature and engrave the words "LED LAMP" On the centre of the top of my solid model part. Top View reads vertically going up the way.
Please edit part 8. Then start the Emboss process. 1/64 = Depth. Flat White colour. Following the video on youtube they use engrave from face then reverse the direction the arrow points towards the model. Then OK. That's the way I am showed it and I can't get it to engrave.
How do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
I was trying to query some sketch points data from a profile Path using code as below. However the program stopped without telling the reason.
Code below:
i = 0;
foreach (ProfileEntity oSourceProfileEntity in oProfilePath) { switch (oProfilePath[i].SketchEntity.Type) { case ObjectTypeEnum.kSketchArcObject: { SketchArc srcSkArc = default(SketchArc); srcSkArc = (SketchArc) oSourceProfileEntity.SketchEntity; // error points[i] = srcSkArc.StartSketchPoint.Geometry; break; } default: { SketchLine srcSkLine = default(SketchLine); srcSkLine =(SketchLine) oProfilePath[i].SketchEntity; // error points[i] = srcSkLine.StartSketchPoint.Geometry; break; } } i++; }
First we imported an ".igs" file to inventor, which produced "wires". Then by promoting the wires it produced a 3-d sketch.
The model is in one plane and 2-D, and we are trying to use Ansys 2-D analysis, but in-order to do so it needs to be in a 2-D sketch.
The model is too large to be redrawn on a 2-D plane, how to convert it to a 2-D sketch
want to change sketch 2013 into the sketch of 2010
View 1 Replies View RelatedI need to wrap some curve on a cylinder, after which i need to emboss the feature onto the cylinder.
I had sketches the curve and wrap it but was unable to emboss it to the cylinder.
Edited: I tried the boundary patch command. I was only managed to thicken/offset and then substract one patch with another one failed.
The subject basically says it all. I am trying to emboss two words onto a solid model. Unfortunately it keeps failing. I am copying this model off of U-Tube models "LED LAMP"
How to use emboss feature and engrave the words "LED LAMP" On the centre of the top of my solid model part. Top View reads vertically going up the way.
save it and send it back or explain why it keeps failing.
edit part 8. Then start the Emboss process. 1/64 = Depth. Flat White colour. Following the video on youtube they use engrave from face then reverse the direction the arrow points towards the model. Then OK. That's the way I am showed it and I can't get it to engrave.
I created an iPart which includes 10 or more different part. I need put the part number (text) on the surface (could use emboss or extrude). When I change the part, I need the embossed or extruded part number can be changed automatically.
View 4 Replies View RelatedI've attached the file (Inventor 2013). The sketch shown is a raised lip I'd like to have around a future opening. I actually want that sketch to wrap all the way around the body, but taper down to 0 in the rear as there are to be hinge plates. This is going to be a grill/smoker and there needs to be a 3/8" raised lip at the future seam of the top and bottom. Shown in the model is just the top portion.
View 8 Replies View RelatedI'm stuck on a few different emboss cases. The following examples are just dumbed-down models to learn from. If it matters - I'm actually embossing patterns on more complicated parts - not text on primitive shapes.
Case 1: Emboss across several surfaces. Please see attached file "Wrap Emboss 1". I can wrap to a face - but not all three faces on the solid that I want my "TEST TEST TEST" message to span across. My embossed text goes off into space - it doesn't wrap around the edge of the solid as desired.
Case 2: Emboss text (or some other arbitrary shape) onto a single (but compound) surface. Please see file "Compound Emboss 2". If the curvature of the part isn't significant - there are a few ways to fake/trick out the model to get a passable result. BUT - when the curvature of the surface is significant relative to size of the text/pattern to be embossed - I haven't yet found a solution that doesn't wildly distort the embossed feature. As the surface of the part is compound - I can't use the "Wrap to Face" option without an error. The resulting embossed feature is unacceptable.
When I edit certain sketched some other sketches disappear. see attached.
This is causing modelling to slow down as I can not project lines from the sketch that has disappeared.
After I create a adaptive part from projected sketch. How to modify the sketch? Please see the part attached.
View 6 Replies View Related