In a part, I create a sketch, add annotation Type in the file name. Then create an Emboss feature using this sketch.
How can I add the file name property to the text. I want the the emboss to update to new file name if I rename the file.
I created an iPart which includes 10 or more different part. I need put the part number (text) on the surface (could use emboss or extrude). When I change the part, I need the embossed or extruded part number can be changed automatically.
View 4 Replies View RelatedI have embossed text onto a part face with an assigned colour of white (main part colour is black). That is all fine in the part model, and indeed when I use that part in a sub-assembly. But, when I use that sub-assembly in a larger top-level assembly the text is black (which doesn't show up too well on a black background ). I must be missing something in a setting but I can't find it. As a test I brought another white-on-black embossed part into the same top-level assembly and that is absolutely fine.
View 2 Replies View RelatedIs it possible to link one part file dimension to another part file?
1. Part first is a cylinder in parametric table i changed it,s name OD , ID and thk. ( find attachment )
Cylinder ID is ( ID=105)
2. Then i made 2 nd part whose step od ( od=102) is going to insert in to cylinder id.There is 3 mm clerance every time
3. So i have to make equction in 2 nd part that ( Step OD= ( ID-3).
means next time when i will change ID of cylinder OD of 2 nd part will ger changed automatically minus by 3 mm than id of cylinder.
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies View RelatedNew user 2014
Part created in assembly does not update to part file.
The simple question is… how can we insert a step (stp) part into an existing part file?
The story behind the question is this:
Normally when we get a step file assembly from a customer, if the part has changed, we put our part into Old Versions and save their new step file as our ipt number and replace it in our assembly file. With Vault, in order for us to maintain the history of the part files, we need to keep the original file so we can’t just delete it or replace it, so now we need to figure out how to get a step file into an ipt. The Import command on the Manage tab (with 2013 at least?) does not allow import of stp files just yet.
The only other option I can think of is to put the original part into an assembly with the step file, create a copy of the step information in the part file and use it to recreate the new (step based) part.
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
I started out with a single 3 dimensional piece i had made using sketches, and split it into two using the split feature under the modify tab. Now I would like to take each of those two pieces and copy them into their own individual part files. I could do this by remaking them, but was wondering if I could simply copy and paste them into separate files.
View 2 Replies View RelatedI want to import some of the iproperties of one ipt file into an iam file.how to do it.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
Describe the external referencing of a part file by an assembly file? I keep getting confused between part file and an assembly file.
View 2 Replies View RelatedI have 2 separate sketches which will be used to EMBOSS on the curved surface.I can get them to work except i want 1 sketch to be Green when Embossed on the surface in color and the other sketch to be red in color when Embossed with the back ground Black.I can only get it to work as 1 color.I tried with Split command but still no luck.After both sketches EMBOSSED to the surface i can only get 1 color for both EMBOSS
View 1 Replies View RelatedIs there a way I can use the emboss feature in an assembly? We typically laser mark during final assembly and would like to show that as a step in the assembly instructions.
I typically create a sketch with the text and extrude(cut) in the assembly. It works fine for flat surfaces, but cannot do it for other surfaces.
The one way I can think of doing it would be creating ipart with text and using it in the assembly. I would rather not do it this way. Is there any other way to accomplish this with out altering the components (.ipt)?
How to emboss scale on the cylinder? Please see the file attached. The arrow is the portion I want to created in my part file.
View 9 Replies View RelatedI edited a sketch for an emboss to move the number over. But the resulting emboss still acts like I din not make the edit.
Inventor Suite 2013 Ultimate
The subject basically says it all. I am trying to emboss two words onto a solid model. Unfortunately it keeps failing. I am copying this model off of U-Tube models "LED LAMP"
Try and use the emboss feature and engrave the words "LED LAMP" On the centre of the top of my solid model part. Top View reads vertically going up the way.
Please edit part 8. Then start the Emboss process. 1/64 = Depth. Flat White colour. Following the video on youtube they use engrave from face then reverse the direction the arrow points towards the model. Then OK. That's the way I am showed it and I can't get it to engrave.
I'm trying to emboss a sketch to a lofted body. The same sketch is embossed perfectly on a flat/round/extruded/chambered body, but on this particular lofted body I get an error ("Thicken operation would result in a large topology change. Try with a smaller thickness"). I already tried with 0.01mm thickness and still not work. What could be the cause. (I'm using IV 2013)
View 4 Replies View RelatedI need to wrap some curve on a cylinder, after which i need to emboss the feature onto the cylinder.
I had sketches the curve and wrap it but was unable to emboss it to the cylinder.
Edited: I tried the boundary patch command. I was only managed to thicken/offset and then substract one patch with another one failed.
The subject basically says it all. I am trying to emboss two words onto a solid model. Unfortunately it keeps failing. I am copying this model off of U-Tube models "LED LAMP"
How to use emboss feature and engrave the words "LED LAMP" On the centre of the top of my solid model part. Top View reads vertically going up the way.
save it and send it back or explain why it keeps failing.
edit part 8. Then start the Emboss process. 1/64 = Depth. Flat White colour. Following the video on youtube they use engrave from face then reverse the direction the arrow points towards the model. Then OK. That's the way I am showed it and I can't get it to engrave.
I've attached the file (Inventor 2013). The sketch shown is a raised lip I'd like to have around a future opening. I actually want that sketch to wrap all the way around the body, but taper down to 0 in the rear as there are to be hinge plates. This is going to be a grill/smoker and there needs to be a 3/8" raised lip at the future seam of the top and bottom. Shown in the model is just the top portion.
View 8 Replies View RelatedI'm stuck on a few different emboss cases. The following examples are just dumbed-down models to learn from. If it matters - I'm actually embossing patterns on more complicated parts - not text on primitive shapes.
Case 1: Emboss across several surfaces. Please see attached file "Wrap Emboss 1". I can wrap to a face - but not all three faces on the solid that I want my "TEST TEST TEST" message to span across. My embossed text goes off into space - it doesn't wrap around the edge of the solid as desired.
Case 2: Emboss text (or some other arbitrary shape) onto a single (but compound) surface. Please see file "Compound Emboss 2". If the curvature of the part isn't significant - there are a few ways to fake/trick out the model to get a passable result. BUT - when the curvature of the surface is significant relative to size of the text/pattern to be embossed - I haven't yet found a solution that doesn't wildly distort the embossed feature. As the surface of the part is compound - I can't use the "Wrap to Face" option without an error. The resulting embossed feature is unacceptable.
I amrying to create embedding of a text entered through dialog box. The sketch regenerates fine but the Emboss doesn't. Cannot figure it out, tried a lot of different approaches...the text has to be configured this way - need to control it's height.
View 2 Replies View RelatedHow to make a marking emboss on the green area?Because before make a emboss i can't make sketch in area that.
View 1 Replies View RelatedI would really like to put some text in the part that links to the iproperties so I can emboss the stock number on the parts. It never fails that you create a new part, then forget to change the text. This would save a ton of time and re-plots.
Inventor 2010
Is it possible to emboss multiple elements at once, without selecting each of them separately? I got over 2k elements on sketch which are needed to be embossed, it would be really pain to do it manually.
View 6 Replies View RelatedDoes view rep work in part file. I remember few months before some one wrote saying not in part file and it works only in assembly file. Is it still the case. How to turn off few parts in my drawing.
View 1 Replies View RelatedInventor has the ability to store multiple configurations of a part within the same .ipt File without having to resave the file as a new file. Something like in AutoCAD where you have Model Space and Paper Space within the same drawing.
View 2 Replies View RelatedWhen I rename a part, the iproperties field under project>part number does not change. If there is a drawing for the part, the part number in the drawing reflects the old part number.
Can I tell inventor to rename the part automatically to the file name as seen in windows explorer? Can I set it to rename automatically in the tree in an assembly environment?
I'm using Inventor 2013.
I name my files with our part numbers and the revision number. Our part numbers are 6 to 9 digits long and sometimes start with a zero! My iLogic rule, while simple, drops the first zero if its there. See the "FirstNumbers" below: (I tried to add the CStr(), but now I see that it just changes it to text after it drops the zero!)
ThisFile = ThisDoc.FileName(False) 'without extensionFirstNumbers = CStr(Val(ThisFile)) 'sets the first numbers from the file name to textPartNumber = iProperties.Value("Project", "Part Number") 'reads part number from file
'check to see if the part number is the same as the file name's numbersIf String.Compare(FirstNumbers, PartNumber, True) = 0 Then'do nothingElse
'set the Part Number to the file name's numbersiProperties.Value("Project", "Part Number") = FirstNumbers
'let's me know that something has been doneMessageBox.Show("Part Number has been set to " & FirstNumbers, "Part Number from File Name")End If
I am engraving a company logo on to the outside of a round tube with a custom font. There are two boxes of text that I am engraving. The first box works just fine with the "Emboss" tool. The second line works fine when the "% Stretch" parameter in the text edit window is left at 100%. When I change the "% Stretch" to 85%, I get the "Self-intersecting loop found in this profile" error message. I get this error message when I try stretching it to 115% as well. I changed the font to a standard font and I was able to emboss the text no matter the "% Stretch" value.
The bottom line is Inventor will not emboss text that has a custom font and a modified stretch percentage. This line of text must be stretched to match the company logo.
I have an assembly of pallet racking, it is one complete frame which can be modified in all the desired ways by the ilogic i have in place. I wish to be able to put this frame into a new assembly but have different dimensions for each frame. I used to do this by copying all the files to a new folder so that each frame had its own parts. This has stopped working and now once one frame is altered all the other frames change to rather than having there own dimensions.
View 1 Replies View Relatedi am trying to open the 3D part file from Parasolid Document to Inventor but it reflected only half of the 3D model.
Attached is thepdf file of how exactly it looks like and the parasolid file also.