AutoCAD Inventor :: Design Of Metal Grate Using Rectangular Array Feature
May 3, 2011
I am looking to design a grate approximately 5mX10m with holes 250mmX32mm. My first thought was to drawing the outline of the 5mX10m grate, then create an array of tiny 32mmX200mm boxes and extrude the material between the boxes and the boundary frame. Unfortunately when I create the simple array (something like 50box by 120 boxes) inventor keeps freezing I'm thinking this is too large of a patter for inventor.
How I can make the grate in a smarter/ less resource intense manner?
View 3 Replies
ADVERTISEMENT
Apr 24, 2013
is there a way to create an associative array of posts so I only have to edit one part to have the entire array change? that is, I want to have global values for the dimensions in the picture below: post diametervertical width between post centreshorizontal width between post columns (again, centre to centre)vertical shift of each column w.r.t. previous one I've used the Rectangular Pattern tool to create a repetition of my posts, but I want to shift each column of posts up slightly with respect to the one before as in the attached picture:
It seems that if you want to repeat along non-perpendicular axes like this, Inventor fails if there are too many repeats. I came across this when searching the site:
[URL]
I can verify that this is my exact problem but can add that in my example, 4 repeats on the almost horizontal axis and 3 on the vertical work fine. However, 3 almost horizontal axis repeats by 4 vertical axis repeats will only work if I choose the vertical axis as Direction 2. (Is this a bug or am I trying to use the Rectangular Pattern Tool incorrectly?)
The repeat unit can be simplified to 1 circle with 2 construction lines along the repeat Direction instead of the 2x2 circles shown here but the problem persists. Also
View 9 Replies
View Related
Sep 19, 2012
I'm trying to use the PATH array feature on 2013 to array stairs, and I can't get the array to be 100% accurate. It seems like CAD rounds the decimal to the nearest 3/4" which could be causing the problem.
I set my run to 10.5" and rise to 7.25", array along the angle of the stringer, and there's always a small overlap on the stairs. The "distance between" should be 1'-209/256" and CAD rounds it to 1'-3/4" which is where I believe the error is. Is there any way to fix this or array this correctly? Otherwise...back to the COPY method I suppose.
View 4 Replies
View Related
Jun 18, 2013
I have a rectangular piece of sheet metal and all I want to do is make the sheet curved with a radius of 113.75 in.
How do I go about this? Is there an easier way like making a 3d sketch and putting a sheet metal face on it?
View 2 Replies
View Related
Jul 23, 2012
While using the Circular Pattern feature or rectangular pattern feature in Inventor, sometimes I want to extrude (join) or cut the drawings that I made (augmented) with using circular pattern feature, rectangular pattern feature. in this case do I have to choose all the augmented members one by one (for instance I make 42 augmented members), it can take a lot of time. also after applied any of these features I can't use trim feature, can I ? but sometimes using the trim feature after applying the Circular Pattern feature or rectangular pattern can be necessary.
View 1 Replies
View Related
Oct 3, 2012
We are using Inventor 2011 and I would like to make a small app that allows my users to graphically select one or more occurrences of a rectangular pattern feature Then allow them to suppress them if desired.
I have determined the code to loop through the pattern occurrences and toggle suppression for any instance. What I do not know how to do is determine which occurrences have been graphically selected.
At this time I am only concerned with round hole features. (Perforated metal)
View 3 Replies
View Related
Aug 5, 2013
I have a template that I have created, in it I have a rule that changes the stock number and description based on which sheet metal rule is selected. The weird thing is it works correctly if the first sketch is a rectangle. If you sketch a circular shape and make that the face it will not work. It blanks out the values for the stock number and description.
I'm running Inventor 2014 update 2.
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 33212 StartFragment: 314 EndFragment: 33180 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
DimiPropValAsString=""
DimiPropDesAsString=""
SelectCaseSheetMetal.GetActiveStyle()
[code]...
View 1 Replies
View Related
Jun 11, 2008
I have to design the packaging that goes with the products we make and it occurred to me that sheet metal and corrugated paper behave similarly. And it would be nice to design the packaging around the product and then unfold it to spec the die cut and for estimation.
View 9 Replies
View Related
Dec 13, 2013
I was working in AutoCAD LT and wanted to report on the number of items in a rectangular array, but cannot seem to find such a variable. In the polar and path arrays there is an object count, but don't seem to be able to find the same field for the rect. array. There must be some field for it, because when I shift over to standard AutoCAD I can get the information from the Data Extraction tool.
I am using AutoCAD LT 2013...
View 5 Replies
View Related
Feb 27, 2012
I am wondering if Inventor can generate a Derived part in Sheet Metal Design? Then we can still keep and edit the sheet metal features ? It will be a sweet convenience for the symmetric design.
View 9 Replies
View Related
Sep 17, 2013
I need to finish the design for my crate that I'm going to build. It's a personal project, and I already finished the whole box, but I have a big issue. I need to add a lock, and I've tried looking for some but I have not found a suitable design or lock for the box.
I might have to redesign it slightly if a hinge is going to be added, but I think the only proper way of locking it is putting 4 locks on the 4 sides at the top of the crate. The top and bottom of the box are 2 separate parts that are the same.
View 1 Replies
View Related
Dec 4, 2012
In Autocad 2013, Is it possible to erase somme items of a rectangular associative array. I have seen that we can replace an object with a different one.
View 8 Replies
View Related
Jun 24, 2012
I can't find the option to use angle in rectangular array in AutocAd 2013. I am using the classic view mode.
View 7 Replies
View Related
Apr 29, 2013
I do not understand how to draw a polar array around a rectangular shape. If it were a rectagular dining table of any size how do I array the dining chairs around the table's shape. Alternatively what if I had a large square table and wanted to array 12 chairs with 3 chairs on on each side of the table ????? I get polar arrays around a circle or polygon but do not understand the rectangle concept ???
View 2 Replies
View Related
Jan 13, 2014
I have an assembly with a client feature that contains client graphics. I have exposed the visibility (ClientFeature.Definition.ClientGraphicsCollection[1].Visible) to the user via a context menu option. Changing the visibility currently affects all view representations. Is there a way to associate the visibility with each design view representation?
View 5 Replies
View Related
Apr 5, 2011
This is an oven design in 3D. But I would do it brick by brick, if feasible. Below the picture. Some considerations: I tried to do using Autocad 2012 using the Polar Array new feature, but I can not close the oven on top.
[URL].......
View 9 Replies
View Related
Jul 14, 2013
I am doing basic graphic design in PS Elements 10. I'm creating what will be an car door magnet that is made up of images and text. I want to draw a rectangular outline around the entire design and can't figure out how. When I use the rectangle tool I get a big solid color box that covers everything else. I just want to make a bounding frame....
View 1 Replies
View Related
Feb 7, 2013
I am using some A&D MR metal material in my scene and it is coming out transparent. The same is happening for any material that has a shine/reflection. It looks like a poor quality 'cloaking device' type effect.
I am rendering with Mental Ray using a bitmap environment background, daylight system and MR photographic exposure.
System information: Win7 x64 / 3DSMax Design 2014 SP3 / AutoCad 2014 SP1 Lenovo E30 ThinkStation Xeon E31225 Quadcore @3.10Ghz PNY GTX760 XLR8 2GB (334.89 Driver) 24Gb Ram Corsair 650w PSU
View 2 Replies
View Related
Oct 9, 2013
I wanted to use the program to design a robot for our school vex competition. Vex has provided cad files for all the parts. So, how i can import the seperate parts into one design. I can only open each part individually but cant find a way to combine them so can assemble the robot in one design.
View 2 Replies
View Related
Sep 30, 2011
How does one get the array window in 2012 to open with the array command like it does in 2007
View 2 Replies
View Related
Apr 10, 2012
I just made a copy of assembly in Design Assistant.I opened the copied assembly in Design Assistant to make some changes.Parts are accessible but I have only "Clear" option possible. URL....
View 2 Replies
View Related
May 2, 2012
I have to make a spring for an engineering class I have yet me nor the teacher know how to make a rectangular spring.
View 3 Replies
View Related
Dec 24, 2013
Im trying to reproduce the part attached. Its a rectangular aluminum tube. .320 x .180 approx an inch long. I tried lofting 2 sketches but the result does appear like the attached image.
View 8 Replies
View Related
Feb 22, 2012
Can an equation be used to calculate equal distances when using the rectangular pattern.Regarding the attached .ipt file i would like to place 25 holes in the X direction with equal gap size between each hole.Also how to calculate the number of holes in the Y direction again with equal distance between each hole.I have not done this before with equations but was thinking that i would need to use the Length x Width in the equation.Do i need to add figures into the Parameters box also?
The attached file with the Hole feature the sketch is not constrained for the purpose of using an equation so i know how far from the start of the part to get equal distances between each hole to the end of the part .
View 5 Replies
View Related
Jan 1, 2014
regarding obtaining the dimensions of a simple retangular prism?
In this particular case (file attached) the geometry was imported from Revit, so it's really just imported SAT file. After importing, "Make components" was run to generate individual part files. The resulting part is therefore created using the origin of the parent assembly, so although it's "just a box" - it is spatially displaced and oriented at an unknown angle.
I'm looking for a way to identify the 3 dimensions that define the shape of the prism.
View 3 Replies
View Related
Feb 20, 2012
I am using Inventor 2012. I have a horizontal feature that terminates at a vertical plane on one end and an angled plane at the other end. I want to pattern it down but when I use Adjust, the patterned features do not adjust to the angled plane. They just go strait down from the first feature.
Does Adjust only work if the terminator is a solid surface instead of a plane?
View 1 Replies
View Related
Nov 3, 2011
I am having a problem with an iPart. I created a rectangular patern in an iPart. When I place the member of the iPart in the Assembly file the pattern is not there. I need it to constrain another part to it.
View 4 Replies
View Related
May 14, 2013
I am currently trying to model a multi cavity mould tool. The cavities themselves do not follow either a circular or rectangular pattern.I have modelled one of the cavities using a revolve internal to the tool. I have also sketched out on the upper surface centre points where I need the cavities to be.
I was hoping I would be able to copy the cavity feature, select a base point and then use the centres from my second sketch to place the cavities.
I don't seem to be able to find this option. The copy and paste feature will likely work but it is hugely long winded positioning each cavity individually. Any method I might be able to use to model such a part?
View 2 Replies
View Related
Dec 1, 2009
Looking for some sample code for patterning a hole in a part using Inventor 2010. I dont need it to be selected because it is the only hole i have in the part. My main trouble is that I am having trouble withobjectcollection idea. As you can guess I am a newbie at Inventors API.
View 5 Replies
View Related
May 18, 2011
Is it possible in inventor to make an assembly mirror array? I can't seem to make it keep from just copying the parts. It works OK for circular and rectangular patterns.
View 9 Replies
View Related
Jan 21, 2012
how to make spiral array? I am to model ballscrew and would like to put ball in. To do so I would need something like spiral array.
View 8 Replies
View Related