I'd like to use the Cable and Wiring tools to model some fibre optics. I can see how this could work well, being able to set and check for the minimum bend radius. However, I'd also like to include a loop of greater than minimum bend radius between the two connection points, we tend to do this to reduce strain on the fibres. Any elegant solution for inserting the loop?
View 3 RepliesHow best to go about creating a "wire mesh". What i have tried is to create a solid flat (2mm thick) piece of material. I then draw a diamond shape on the surface & extrude it so as to give me a void.
Then i use the rectangular pattern option. The problem is that when i try putting in the amounts of the "holes" i need to brings up message to use optimized compute. I do that and then when i click to crate all the "holes" it comes up with a pattern failure error.
What other way can i use to create my object.
I'd like to create a macro that I can run from within an assembly that will loop through each BOM item and add the quantity req'd to a custom property within the component. I'm very familiar with VBA from Office, but I'm new to it with respect to Inventor so I'm pretty fuzzy with object titles and options.
Here's an outline of what I'd like to do:
Execute Macro from within Assembly file
For Each BOM Item to # of BOM Items
If Vendor = "Make" then
Set Component Custom Property "Qty_Reqd" = Total Qty from BOM
Endif
Next BOM Item
how to mesh wire together in a pattern on a pole of say 60mm diameter and 1 metre length?
View 9 Replies View RelatedWhats the importance of "Shell Connector Tolerance"in the create new simulation dialog box. Any example or some kind of illustration to explain this.
C1
Inventor Professional 2013
Vault Collaboration 2013
When defining a wire, to get the correct termination at each end I would like to add Virtual Parts to the Connector Pin Name properties (Select the with, RMB - Harness Properties- From To- Properties (connector Pin Name)- Virtual Parts.
Is there any way to get properties from this onto a Loom Report allied to the wire? Our current Loom drawings list the wire with the terminal connectors at either end. I have tried using GETPART1 & GETPART2 in the cfg definition but this picks up on the Part with the Pin, not the Virtual Part on the wire.
how to draw the intersection wire like a half circle passing over the other wire.
View 9 Replies View RelatedI am trying to create a closed loop alignment for a track. Previously i have included a small gap between two alignments to get around the problem when a housing plot is created (see the attached dicument) when a closed alignment is created, Is there any way of getting rid of this?
View 9 Replies View Relatedi'm trying to make a banner for a jewelry store and the guy wants a wire-frame diamond that rotates... i have absolutely no clue where to begin. does anyone know how to accomplish this? can it be done in photoshop/imageready?
except i want just the wire-frame of the diamond, not actual shading, and also maybe have the diamond rotated 45 degrees to the left.
is it possible to define a 'natural direction' at a pin, in which a wire should start when connected to that pin? This would seem to be natural for me.
As the attached picture shows, my wire is connected at this pin in a weird direction (because I need to route it through the indicated segment).
What is the best strategy to do it correctly?
Another question: I increased the diameter of the segment, hoping that it means that the wires are constrained within the segment, but are free to move withini this. But they all seem to be constrained to the centerline. What I want is that all my wires pass within this 'tube' of 30mm diameter.
I work for a company that does custom electrical enclosures and we use a 2010 version of inventor professional. What would be required to run wire in assemblies easily and also output wiring diagrams?
View 1 Replies View RelatedI am having trouble constraining the wire track in the attached picture. I want the track to move naturally when the sliding piece moves, however it folds over on itself and doesn't stay in line. I can't figure out anyway to make it look uniform and move they way it should, is it possible in inventor?
View 5 Replies View RelatedI made the parts but cannot make the wire fit in the assembly.Is it best yo make the wire in an assembly mode then as a individual part to fix in the assembly.How would you make the wire and also so it connects correctly in assembly
View 5 Replies View RelatedI'm working on constructions that are operated with winches. However, I haven't found a way to model the wire so that it moves as it should.
I've attached a simplifed assembly that illustrates my issue.
In the "Master" position the wire looks as it should.
However, in the "Up" position, the wire does not. (red line indicates desired wire path)
I'm not interested in making the wire slack, just to have straight lines and radiuses around the sheave.
The actual constructions are much more complex, with 15+ sheaves and the wire moving in all three dimensions, not just in one plane as in the attached example. So a simple extrude cut on the assembly would not work.
I need the wire to work in the various set positions ("Master", "Up" & "Halfawy up") on an assebly level, so that it can be shown on drawings.
Optimally I'd love it to work in the "Flexible" position, so that it automatically adjusts (in real-time) as I move the rod, but it's not a requirement.
I've found multiple videos on Youtube showing something similar to what I want to accomplish, but no description of how it's done. Examples:
Inventor Simulation - Pulley and Cable.wmv
Winch - Autodesk Inventor (the wire being spooled onto the winch is not required, but it does look nice)
I've modeled a "twisted-in wire brush" and I'm getting graphic/model glitches. Every now and then when I zoom in on the model it becomes an abstract mess. It has something to do with the twisted wire portion of my model. It's just a simple coil (sketch: 2 circles twisted downward) feature but Inventor keeps choking.
Any twisted wire texture that perhaps I could try. I'm not quite sure how to make it myself. Plus, Inventor 2014's entire Material/Appearance library is a real dog's breakfast. What used to be be rather simple for me has become a challenge.
Inv 2014 Pro, Build 170, Update 2 applied
Someone has given me a .wire file from Alias. I fired up a new assembly in Inventor but it imported into a part. There are many parts to this design, and I'd rather have them as separate parts. However what I have now is one part with many surfaces (which I can turn on or off). Any tips for bringing it in differently? Maybe I can derive some parts out from my existing part which has about 20 surfaces (which should be parts)?
View 9 Replies View RelatedI would like to add tree parameters to this part. One is a wire diameter. Another should be the length of the wire. The last should calculate the weight of the wire. Then I wish to set the mass of this wire part equal to this last parameter. Is it possible somehow?
View 3 Replies View RelatedCAM software that will run a hot wire CNC machine used for cutting EPS foam? I am using Inventor to create my product drawings and I want to use an integrated CAM software to create the G-Code to run my hot wire CNC.
View 1 Replies View RelatedI just installed Inventor 2012 two days ago and obviously no training yet. My boss asked me to do a part for GibbsCAM which includes a 7/8" left hand wire rope imprint in a block of steel for this afternoon's production. I have my block done, what is the best way to do this? I'm thinking create a wire rope solid to cut out of my block. Would I use the thread tool: that's not the same but would it work?... I don't need a representation. I need the read thing that will work!
View 2 Replies View RelatedI'd like to make an animation of a thin copper wire being wound onto a pulley. Is this possible in Inventor? I'm not sure Inventor will allow the thin wire to be bent. I can imagine other ways to make the animation, but I'd much rather have the wire bend around the pulley as the pulley rotates.
View 1 Replies View RelatedMany times, we run several individual wires from one device to another. They are not grouped in a cable jacket or anything just individual wires. I was wondering if there is anyway to make the wire routing look a little neater as right now I have to tweak each wire one by one and many times it looks like crap. Can I use a segment for this and then just turn off the visibility of the segment or something? I just want the wires to look neat running from one place to another and there must be a way to do this?
View 6 Replies View RelatedAfter I create a wire it will not be displayed as a rendered wire. There is no indication of error in the wire (to sharp angle) and this is also happens for a straight wires with no turns.
I have made multiple revisions of an assembly and in older reviosions I can make the wires and they are shown as rendered. But in the latest revision it is not possible. In a older revision I had a harness assembly than deleted it could this have any affect?
Also is there any setting that hides rendered wires that I might have turned on accidently?I have a student licence and the assembly has about 700 parts if that makes any difference.
I have a sphere body whose material is partly removed by a boolen subtraction with another sphere. When I query the EdgeLoop of sphere for Outer edge loop using function InvEdgeLoopPtr::GetIsOuterEdgeLoop(), I always get a value of VARIANT_TRUE. check for the inner and outer loop of a sphere? use the attached file for reference.
View 3 Replies View RelatedHave sketched the geometry for an 18 tooth circular sawblade. However I have had difficulty applying the close loop function. As a result am not yet able to extrude the saw blade. What to do to implement close loop?
View 4 Replies View RelatedI am trying to create a logic rule to replace the model reference in a idw file and then save as using the new file reference name. I am able to do this for individual files or components within an assembly file.
However what I would like is to check through all files of a certain type (for example ipt with filenames beginning "SSUA" ) in a specific folder.
The following code from Curtis Waguespack works well for individual selected files but I would like to take it a stage further with the above parameters.
Dim oDoc as DocumentoDoc = ThisDoc.DocumentDim oRefFile As FileDescriptorDim oOrigRefName As Object For Each oRefFile In oDoc.file.ReferencedFileDescriptors'get the full file path to the original internal referencesoOrigRefName = oRefFile.FullFileName'present a File Selection dialogDim oFileDlg As inventor.FileDialog = NothingInventorVb.Application.CreateFileDialog(oFileDlg)oFileDlg.InitialDirectory
[Code]........
I have VB code that loops through and utilizes Excel data to pick which file(s) to open, update, and close. Then it opens the appropriate .idw file, updates it and saves it as a .pdf.
The line of code I have now is simple:
_invApp.ActiveDocument.SaveAs("C:UsersxxDesktopA60.pdf", True)
and that writes the file to my desktop as a .pdf.
However, as the loop runs over and over, it will find another data set that is the same A60 type, so it will want to save OVER that .pdf it's already created.
How do I go about having a variable filename? Something where it would add a _01 _02 _03 (or similar) to the end of the filename (i.e. A60_01.pdf, A60_02.pdf).
I am currently designing a heat exchanger and want to adjust the number of water channel using iLogic. The number of channels to be active is based on the channel dimensions, and is calculated in my excel spreadsheet, but up to a maximum of 19. This is stored in the parameter "no_channel". Each channel is a seperate feature (extrusion) and named from "Channel 1" though "Channel 19".
My idea of doing this automation was to have iLogic suppress all the features, and then doing a closed loop to unsuppres the features I want active:
Feature.IsActive("Channel 1") = FalseFeature.IsActive("Channel 2") = False...Feature.IsActive("Channel 19") = FalseFor i = 1 To no_channelFeature.IsActive("Channel"(i)) = TrueNext
However, this gives me the following error:
Error in rule: Number of channels, in document: Radiator fin side.ipt
Feature.IsActive: No feature found with the name: "h".
I'm desperate to know how should i heal the errors for loop orientation issues. I had imported the .stp file into inventor so i can do stress analysis. After imported the file and enter into repair environment, after i find the errors shown 9 errors in loop orientation issues.
View 1 Replies View RelatedI wanted to chamfer a poligonal faced part, but had to select the edges one by one.
The Edge Chain buttons were grayed out, why?
Is it possible to stop an infinite loop when running an iLogic rule?
View 4 Replies View RelatedWhen I connect with Autocad Map to WMS server (Geoserver) and try to choose Server CS, Autocad crashes. This didn't happen until 2012, and in 2011 work just fine.
View 1 Replies View Related