I'm desperate to know how should i heal the errors for loop orientation issues. I had imported the .stp file into inventor so i can do stress analysis. After imported the file and enter into repair environment, after i find the errors shown 9 errors in loop orientation issues.
View 1 RepliesI am attempting to split a face so I have a good area to apply a load in simulation and 3/4 of the areas split just fine but I CANNOT get the 4th area to split! This is all just projected geometry but left and right are symmetrical so I can't figure out why the L side works but not the R side.
View 2 Replies View RelatedI've got a closed traverse that has all the elements, but when I try and analyze it, I get the dreaded error: Insufficient angles, distances or points to calculate this loop. Creating a Traverse for Adjustment: [URL]l and my screen capture looks very similar to his, but I'm not getting any results.
View 9 Replies View RelatedI often have the need to change the orientation of my vieports to better fit my project.
I often, and I mean 9/10 times get one or more fata errors when try to do so.
For clarification I am grabbing the wheel in the top right corner between N and E and rotating the view. When I release the drawing is not in view. Then the program crashes.
It is very frustrating and adding hour on to my day.
CPU: (Brand NEW)
MSI GT70
Intel Core i7-3610QM
NVIDIA Geforce GTX 670M/3G GDDR5
12 (+4) GB of RAM
I know I am not running a quadro but I should still be able to handle this type of task.
I have a sphere body whose material is partly removed by a boolen subtraction with another sphere. When I query the EdgeLoop of sphere for Outer edge loop using function InvEdgeLoopPtr::GetIsOuterEdgeLoop(), I always get a value of VARIANT_TRUE. check for the inner and outer loop of a sphere? use the attached file for reference.
View 3 Replies View RelatedHave sketched the geometry for an 18 tooth circular sawblade. However I have had difficulty applying the close loop function. As a result am not yet able to extrude the saw blade. What to do to implement close loop?
View 4 Replies View Relatedbut what are the proper workflow when using inventer models in AUTOCAD.
When I import DWG og iam I get the front view and not top view..
Also a subasemmbly has lost the rotation made in the main assembly..
Why is it when I select the Top (XZ Plane) does the sketch orient itself so TOP is read upside down? Subsequent Sketches on a TOP face yields expected results.
And it is also true that it if I select Right (XY) the sketch orients itself so RIGHT reads top to bottom? and if I rotate the cube orientation so TOP is truly on top, the Constrain Axis' are off by 90º? yet if I subsequently select the RIGHT face for a sketch, it yields expected results (RIGHT reads from left to right).
This cannot be the way it is supposed to be. it although has been this way for may versions.
M6700, Nvidia K3000M, 32GB, 512 SSD
Win 7 Ultimate 64
Inventor 2014
I am trying to create a logic rule to replace the model reference in a idw file and then save as using the new file reference name. I am able to do this for individual files or components within an assembly file.
However what I would like is to check through all files of a certain type (for example ipt with filenames beginning "SSUA" ) in a specific folder.
The following code from Curtis Waguespack works well for individual selected files but I would like to take it a stage further with the above parameters.
Dim oDoc as DocumentoDoc = ThisDoc.DocumentDim oRefFile As FileDescriptorDim oOrigRefName As Object For Each oRefFile In oDoc.file.ReferencedFileDescriptors'get the full file path to the original internal referencesoOrigRefName = oRefFile.FullFileName'present a File Selection dialogDim oFileDlg As inventor.FileDialog = NothingInventorVb.Application.CreateFileDialog(oFileDlg)oFileDlg.InitialDirectory
[Code]........
I have VB code that loops through and utilizes Excel data to pick which file(s) to open, update, and close. Then it opens the appropriate .idw file, updates it and saves it as a .pdf.
The line of code I have now is simple:
_invApp.ActiveDocument.SaveAs("C:UsersxxDesktopA60.pdf", True)
and that writes the file to my desktop as a .pdf.
However, as the loop runs over and over, it will find another data set that is the same A60 type, so it will want to save OVER that .pdf it's already created.
How do I go about having a variable filename? Something where it would add a _01 _02 _03 (or similar) to the end of the filename (i.e. A60_01.pdf, A60_02.pdf).
I am currently designing a heat exchanger and want to adjust the number of water channel using iLogic. The number of channels to be active is based on the channel dimensions, and is calculated in my excel spreadsheet, but up to a maximum of 19. This is stored in the parameter "no_channel". Each channel is a seperate feature (extrusion) and named from "Channel 1" though "Channel 19".
My idea of doing this automation was to have iLogic suppress all the features, and then doing a closed loop to unsuppres the features I want active:
Feature.IsActive("Channel 1") = FalseFeature.IsActive("Channel 2") = False...Feature.IsActive("Channel 19") = FalseFor i = 1 To no_channelFeature.IsActive("Channel"(i)) = TrueNext
However, this gives me the following error:
Error in rule: Number of channels, in document: Radiator fin side.ipt
Feature.IsActive: No feature found with the name: "h".
I wanted to chamfer a poligonal faced part, but had to select the edges one by one.
The Edge Chain buttons were grayed out, why?
Is it possible to stop an infinite loop when running an iLogic rule?
View 4 Replies View RelatedI am just wondering how to change the orientation of a sketch in VB.net. I have no worries in VBA but the command to set the orientation and origin don't seem to work in VB.net.
View 4 Replies View Relatedhow to get the orientation angle of an occurrence using VBA?
View 2 Replies View RelatedINVENTOR 2012 SP 2
I have an .idw file with many sheets, the sheets are a mix of landscape and portrait, when i print all sheets i can not control if the prints all come out in the correct orientation on the paper. For example, see attached pic., this sheet needs to be rotated to fit on paper.
I am not sure exactly why this is a limited feature of Inventor 2011 but when you want to select a sketch to create a boundary patch you have to select each part of the sketch in sequence. It's a pretty laborious task. I am looking to a way to automate this using i logic.
View 5 Replies View Relatedway to redefine a point that was placed in a model with a "Center of Loop of Edges" command? Inventor doesn't seem to recognize type of placement unless it's been selected from the Point drop-down menu, but picking this in the midst of a redefine only creates a new point, it doesn't redefine the original point.
As it is, I've been forced to just delete the original point, create a new one and go from there.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
I'm designing a lift truck with a "chain over" lift - the lift cylinder has a sprocket mounted on the end of the rod, and the chain is grounded on one side. The other end of the chain is mounted to a lifting carriage so that as the cylinder extends and pushes the sprocket up, the chain rolls over it and the carriage moves up (at twice the speed of the cylinder). This is nothing new - it's pretty much how every single fork truck in the world operates.
My question is this: can I use the roller chain generator to model this chain, or should I model the links and array them along a path? My thinking is that if I can use the chain generator, I should be able to animate the chain using Dynamic Simulation. But the chain generator seems to require a minimum of 2 sprockets in order to work - there's no way that I can see to have a "non-looped" chain or any way to just ground the end of the chain.
2014 Product Design Suite
W7Pro-64
Intel Xeon E5-1620 @ 3.60 GHz 16GB RAM
Dual 1GB NVIDIA Quadro K600 graphics
I'd like to use the Cable and Wiring tools to model some fibre optics. I can see how this could work well, being able to set and check for the minimum bend radius. However, I'd also like to include a loop of greater than minimum bend radius between the two connection points, we tend to do this to reduce strain on the fibres. Any elegant solution for inserting the loop?
View 3 Replies View RelatedI have just started to use ilogic, what i want to do is measure the length of a loop in a sketch and then use this measurement as a parameter.
I have found this rule that will measure the loop length and display it in a message box
Dim se As SketchEntity = ThisDoc.Document.ComponentDefinition.Sketches(1).SketchLines(1)
MsgBox(ThisApplication.MeasureTools.GetLoopLength(se)*10 & " mm")
but i do not know how to capture the measurement as a parameter .
I want continuously to display the loop measuring of a Spline/Arc/Line/Slope (or even have it as a dimension / parameter on a sketch/part) because it change in relation to the block-position that constrains to the slope.
View 3 Replies View RelatedI'd like to create a macro that I can run from within an assembly that will loop through each BOM item and add the quantity req'd to a custom property within the component. I'm very familiar with VBA from Office, but I'm new to it with respect to Inventor so I'm pretty fuzzy with object titles and options.
Here's an outline of what I'd like to do:
Execute Macro from within Assembly file
For Each BOM Item to # of BOM Items
If Vendor = "Make" then
Set Component Custom Property "Qty_Reqd" = Total Qty from BOM
Endif
Next BOM Item
I am trying to setup some rules to print various PDF files which we have managed to do without any problems.
The bit I am stuck on is when one of the PDF files being saved is open by another user.
We have been able to error trap it when it is open by showing a message box on error asking them to close the file befopre continuing. The current message box being used is the Retry / Cancel box.
When the user clicks Retry we would like it to re-run the rule, or loops through the rule and check is the file is still open. If the file is open return the same error, and if the file has been closed save the PDF file. When Cancel is pressed it ends the rule (This Bit has been done).
My questions is how do I get the rule to re-run / loop through when the retry button is pressed.
Is it also possible to show the user who has the file open (or Previewing it in a Window Explorer)?
I have attached the Code currently Being used but I can post it here of preferred?
I need to cut slots in a circular pattern around a flange ring, but I also need the slots to maintain their orientation so the slots are straight.
What I am atempting is to create a shim that once cut can be slid between 2 flange rings and not have to take the bolts all the way out.
I attached a pic of what I am trying to do. The slot has to stay in that orientation, yet patterned around the circle.
Is there a way to change the orientation of a derived part in the "new" part file?
Inventor 2012, w/SP2
Dell Precision T3500, Intel Xeon CPU
W3680 @3.33GHz, 16.0 GB of RAM
Microsoft Windows 7 Pro, 64 Bit Edition
Version 2009, w/SP1
I found some code to add labels such as "Top View" "Left" view etc. to view labels, but it's not quite what I'm looking for. I'm OK with the default "View 1" and "Scale 1/4" that comes up on the multiview but I want the view label to say something like "Flat Pattern" and "Scale 1/4" when I do a flat pattern and same for ISO. How to accomplish that with iLogic?
View 1 Replies View RelatedIs it possible to change the default sketch orientation, so that when making a new sketch on the XZ or the YZ planes the Z axis would act as the X, not the Y?
View 9 Replies View RelatedBeing all new and complete virgin-like, to ilogic, I would like to know wether it is possible to analyze a sketch (wenn it is being closed)?
What I want to analyze is:
Does the sketch contain a fully constrained closed loop?
Does this closed loop consist only of straight lines?
What is the total number of lines in the loop?
Next fase is:
Create an excel-sheet with the following information:
For each line in this closed loop i wish to add the length of the line, and the angle to the next line (consequently on the internal side of the loop, resulting in angles from 0 to 180 degrees).
I'm wondering is it possible to orientate the dimension text alligned to paper(2.jpg) but not the UCS of Isometric drawing(1.jpg).
Sometime I need to allocate my drawing with dimensioning in isometric view because its more easy to read.
I'm placing my drawing in *.idw.
Any way to change the Orientation of a circular pattern with iLogic?
View 1 Replies View Related