AutoCAD Inventor :: Can Sheet Name From Browser Be Used In Tile Block
Jan 9, 2012
For years we have been using a prompted entry in our drawings for the sheet number. E001
We have also been changing the sheet name in the browser to match this. If the sheet number changes, we have to change both. Can the sheet name from the browser be used in the tile block? I couldn't seem to locate it under any of the properties.
Our ultimate goal is to use Ilogic to read and write the sheet numbers from a master Excel sheet. I haven't been able to find any reference to Ilogic working with prompted entries.
Currently we are using Inventor 2012
View 8 Replies
ADVERTISEMENT
Jan 27, 2012
How hide SketchesSymbol name in browser on active sheet?
View 1 Replies
View Related
Jun 1, 2011
I was just wandering if there is any possible way to get the DWG NO. (part name in our case) to link the the Sheet Name in the Browser window?
View 3 Replies
View Related
Aug 19, 2013
I placed a Sheet Propertie called Sheet Number in my title block.
I want only my sheet number in my title block and not the follow number.
I found the code made bij Curtis Waguespack and changed Mid to Left.
In the message box it shows the number i want but in the title block it shows only the follow number.
My sheet number is 400:1
why dusn't show only the number 400 in the titleblock?
DimoSheetAsSheet
DimSheetNumberAsString
i = 1
ForEachoSheetInThisApplication.ActiveDocument.Sheets
SheetNumber = Left(oSheet.Name, InStr(1, oSheet.Name, ":")- 1)
MessageBox.Show(SheetNumber, oSheet.Name)
i=1+1
Next
View 5 Replies
View Related
Oct 29, 2012
I opened the drawing and then from the drawing opened the model. In the drawing it is showing the 4th instance of ROUND CRS-032175 X 33 as an assembly. It also is not showing in the view and yet the visibility is checked. AI2012 SP2
View 1 Replies
View Related
Apr 8, 2013
I am trying to use the Browsernode.addchild method to add an occurence to an empty browser folder. The code fails at this point and I gett an error pointing to the line "Call oTargetNode.AddChild(oSourceNodeDef)". I can add the occurence with the browserpanes.Reorder method without issue if the folder is not empty. The code is pasted Below.
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 29338 StartFragment: 314 EndFragment: 29306 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
DimPrcsTpAsStringPrcsTp=InputListBox("Process Type?", MultiValue.List("ProcessType"), Parameter("ProcessType"), Title :="Select Process Type", ListName :="Process Type")DimRtgNameAsStringRtgName=PrcsTp&"-"&Parameter("NoRtgsInc")+1MessageBox.Show(RtgName, "Title",MessageBoxButtons.OKCancel)DimoAsmAsAssemblyDocument=ThisDoc.DocumentDimoMatrixAsMatrix=ThisApplication.TransientGeometry.CreateMatrixDimoOccAsComponentOccurrenceoOcc=oAsm.ComponentDefinition.Occurrences.AddVirtual(RtgName, oMatrix)DimoCompDefVirtualAsVirtualComponentDefinition=oOcc.Definition'CREATE AND SET THE
[code]....
View 1 Replies
View Related
Nov 7, 2011
When I press F1 Inventor opens the help on my default browser (Chrome), but when I click the bynocular it uses Internet Explorer.
Is it possible to force Inventor to use a browser of my choice or the default browser?
View 1 Replies
View Related
Apr 15, 2009
Is there a way to add the sheet name to the title block of drawings with a variable?
I can add the sheet number, revision and size but not the name. Why not?
View 8 Replies
View Related
Dec 21, 2005
I've created a custom title block. I'd like to use VB to fill in this title block using info obtained from an Excel Spreadsheet; Company Name, Location, Drawing Title, etc.
View 5 Replies
View Related
Sep 28, 2011
Is there a way to change the default margin offsets (i.e. the distance between the edge of your border or title block to the edge of your paper), without using the "Insert Drawing Border" option?
I would have thought you could do this through the "Edit Sheet" or "Define New Title Block / Border" options. I have multiple customized title blocks, which each require their own margin offsets.
View 5 Replies
View Related
Jul 14, 2013
I moved the hole table from the original sheet to an other, but the fields in the title block of the new sheet don't update with the iproperties of the model
View 1 Replies
View Related
Apr 9, 2013
First, it requires there to be a prompted entry text box in the title block named <SCALE>, is there any way to write to a textbox that is not prompted entry? The prompt when a new drawing or sheet is created is misleading and makes users think they need to manually fill out the prompt. Secondly, this code works on multi-sheet drawings but it concludes by making the last sheet active. Since we are triggering this rule before save it's a nuisance to have the drawing switch sheets everytime you do a save. Ideally, the current active sheet should remain active when the rule runs. Here is the
For Each oSheet In ThisApplication.ActiveDocument.Sheets
ActiveSheet=ThisDrawing.Sheet(oSheet.Name)
If oSheet.TitleBlock Is Nothing Or oSheet.DrawingViews.count=0 Then Exit Sub
oTitleBlock=oSheet.TitleBlock
oTextBoxes=oTitleBlock.Definition.Sketch.TextBoxes
[code]....
View 1 Replies
View Related
Nov 7, 2011
Standard sheet number option gives you only 1, 2 and so on.
I want A1 where A does not change and 1 changes depending on sheet number.
View 1 Replies
View Related
Feb 17, 2012
Was instructed to use arch titleblock. I created my own shared parameters file. I can physically click on the sheet and name the sheet but the name doesnt change in the project browser,
So I created a shared parameters file. I created the parameters I needed (in this case the sheet title). The parameter properties discipline set to common, type set to text. I edited each label I wanted to re-associate. Hit new, selected the shared parameter, removed the arch label and added mine. I loaded into project and had it overwrite parameters. Then I went to the project parameters and added my shared parameters and under category applied to the sheets.
why the two (project browser and the sheet itslef arent talking?
View 1 Replies
View Related
Nov 15, 2011
I set up our company log which gets embossed on most parts as a sketch block in an .ipt. The .ipt contains nothing but the sketch block. To use it, the designer only needs to derive the Logo.ipt file into their part and then use the scale setting to set the derived block to the desired size for that part. The result is a scalable set of line geometry that can easily be used for extrusion or emboss that is standard for all users. It works beautifully, that is until you try to use it in a sheet metal part in 2012.
For some reason, when this same part, which works perfectly in normal parts, is derived into a sheet metal part an error pops up stating that, "Selected part does not have any geometry that can be derived." Say what?
I was able to find a workaround by directly copying the block into the sheet metal part, but you no longer have the ability to go back and scale it if needed. Even more strange, when the block was copied over, it could not be deleted from the new part.
Is this just a bug with 2012? Why does it work in a normal part but not sheet metal?
View 7 Replies
View Related
Sep 20, 2013
I have an older drawing with an outdated sheet format. I'm wanting to update to a new custom sheet format without having to redimension and recreate views. Is it possible to just update the sheet format?
View 1 Replies
View Related
Sep 12, 2013
A collegue asked me about this as he has been given a part to model and the details are for the flat sheet not the finished model. Is this possible in 'sheet metal'? I had a quick play but couldn't work it out. Im used to creating the finished part and 'un-folding' to get the flat pattern.Detail supplied below.
View 4 Replies
View Related
Apr 16, 2012
I have a dwg file with three sheets in, just default names, I can access sheets 2 and 3 but get the attached errors when trying to access sheet 1 form either sheet 2 or 3
This file was originally created in IV2009 I've had no problems then or with the various conversions of it.
It seems to be memory related so here's the sitrep as for memory 8GB DDR2 RAM, and Virtual Memory set at min of 8192MB and a Max of 16384MB, I did have it set a systems managed but that gave a warning of low virtual memory with almost every drawing file that I opened.
View 1 Replies
View Related
Aug 5, 2013
I am using Inventor 2010 (I know this is my first problem, but you have to use what you're given!) and I need to use the sheet number in a calculation that will display the result in a text box. =((<SHEET NUMBER>-1)8)=1 displays a result of ((11-1)8)+1. I suspect that the sheet number is being brought in as text instead of a number. I tried adding atoi to the equation to convert the sheet number to an integer, but it did not work.Is there an alternate source for the sheet number that will return a number? Is my syntax wrong?
View 1 Replies
View Related
Dec 9, 2013
So, I am using Civil 3d 2013 SP2. I have my blocks set up with the placeholders and proper fields set up to populate my information.
I am not getting consistent results however.
I'll have my model view set up in, let's call it, Sheet "C-104"
I'll place my view on sheet "C-105"
the block is set up for the view name and number, view scale and placeholder of "SheetSetPlaceholder -> SheetNumber -> Uppercase"
The block populates the "current" sheet number.
Now, I have a section block that i will place on the plan view in sheet "C-104"
That block has the same placeholder. It will populate the sheet the view is found on... I.E.: "C-105"
My question is, how do i get the block on sheet C-105 show the sheet where the view was cut from I.E.: "C-104"
Does that make sense?
View 0 Replies
View Related
May 4, 2012
How to add a new sheet with my title block. I am a little confused on this so far. I have read the autodesk 5 parts to sheet set manger and there is allot of things I'm not sure of. The title block is the first
View 9 Replies
View Related
Oct 30, 2013
I'm trying to create a new titleblock for a company I just started with that wants to make the move to AutoCAD. I have a couple of years drafting exp but I'm still learning the finer points of setting up a virgin system. So, I've drafted a titleblock which I'm trying to add attributes to, and I think I'm very close to having it all sorted out but I'm stuck at the moment. See below:
A breakdown of what I've done: Created title block and added attributes for all values we'll be taking from sheet sets (i.e. client name, revision numbers, revision dates}. This titleblock is saved as its own drawing and the attributes are in that drawing. The attributes have tags only- no default data or prompts Created a "Dummy" sheet set with all custom properties needed for future sheet sets/projects (i.e. client name, revision numbers, revision dates. Created a New Drawing using the sheet set manager, with our company's current drawing template.Purged all old title blocks from the new drawing Inserted the new title block (Bullet point 1) with attributes into layout 1.When prompted, I inserted the field for each corresponding attribute.
At first everything looked fine. Sheet number was correct, sheet title was correct, even a couple of the custom properties were alright and displaying properly in the layout. BUT THEN I noticed that a few attributes weren't showing up at all in the layout. When I would edit the title block itself, all of the attributes would be there but when I would try to insert a field into their 'default' parameters, the 'custom sheet set' properties wouldn't exist (like this sheet was not associated with this sheet set). But some of the attributes in the block WOULD be able to reference the custom sheet set properties, so that's not the issue.
My issues are inconsistent. Some attributes work, some don't, some update according to sheet set properties in the layout, others change in the block editor.
Is all of this weirdness being caused by the fact that my attributes are within a block? And does that mean that I have to define attributes in the Drawing template instead?
View 9 Replies
View Related
Apr 23, 2012
I already build sheet system ,and I found when I revise title block template,my sheet not update automatic,I must create new sheet,and double-click it to open it, then you can see update,who know why?
View 3 Replies
View Related
Jun 4, 2012
Under Sheet Set Properties, I have more than one Callout block listed.
But when I go to sheet views and right click a view, only the 1st callout block that I used is available under place callout block.
How do I chose a different callout block? 2013 Civil 3D
View 2 Replies
View Related
Aug 15, 2013
I'm not up to speed in configuring title blocks with sheet set manager and I've come into this situation unexpectedly.
I had to come up with a set of P&P sheets in a hurry to assist a contractor in providing a rough estimate for a sewer run, so I generated the sheets using the preconfigured imperial sheet set template. Afterwards I've switched out the border and title block generated by the template with our standard blocks. Our block attributes are old school and do not use fields. Now I am trying to upgrade those old attributes by replacing them with fields that reference the Sheet Set attributes.
Here is the problem: when inserting the field for the sheet number I can either use the CurrentSheetNumber or the SheetSetPlaceholder attribute. If I use CurrentSheetNumber, the title block shows the correct sheet number for the current sheet (the sheet I am making the edits from). However all the other sheets show that same number. In other words the fields do not show the corresponding sheet numbers from SSM. If I use SheetSetPlaceholder none of the title blocks will update to show the sheet number.
I believe I should be using the placeholder field but I can't get it to synchronize it with the SSM. Is there a way to make this work?
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
[URL]
View 9 Replies
View Related
Mar 7, 2012
I am trying to insert a block in the drawing sheet, that varies in size dynamically. Is there anyway for changing the size of the block.
View 9 Replies
View Related
Jul 4, 2011
So I am Loving the use of Attout and Attin for updating block attributes from a spread sheet...Currently I am producing drawings with names on desks. I have created a block with the attributes of Name and desk.
I am currently updating the drawings blocks so that I can input an excel spreadsheet with over 1500 names into the drawing using Attin (changed the .xls to .txt and roberts your mothers brother)
Unfortunately the spreadsheets I have been given have the name as one field. i.e name: Joe Bloggs, Ideally I would have the information as First Name: Joe last name: Bloggs and create two associated attributes which would enable a nicely displayed block..
is there any way that I can format the block so that the attribute displays as a multi line..e.g.
Joe
Bloggs
not
Joe Bloggs.
I know I can go into each attribute (although trying to remember that command "A something Edit" I think) and edit it like a piece of txt. I would rather not have to go and do that if there is another work around..
View 3 Replies
View Related
Jun 26, 2012
I've created a sheet template that includes Fields to populate the sheet with the Project Name and location among others like scale, etc. When I create the new sheet in the project navigator most of the fields populate with the correct information based on the parameters set in the project. However, it consistantly does not populate the Project name and location. When I click the field and ensure that the attribute is set correctly then it renders the correct information. The problem is this ends up being a manual operation yet it still reads as a smart tag. Why do these not populate automatically?
Here's my process:
Create dwt for sheet file and include xref of title block.
Create a block with attributes that link to AEC Project, CurrentSheetTitle, etc. and insert into dwt.
In project navigator I create new sheet and select my template.
Information does not populate.
But when I view the block and close (no edits) it then links.
View 6 Replies
View Related
May 29, 2013
When you place a part (let’s say structural steel part) from content center as a custom part and later change the part size, the browser still shows the old part name which makes it very confusing when scanning through the browsers when you're trying to find something. It makes it almost unusable if you can’t trust the description. How do others handle this? I know about browser rename but that won't work because it defaults back when you close and reopen.
View 4 Replies
View Related
Nov 1, 2013
I am getting the i symbol in front of my 3D sketch in the browser bar. Unlike a 2D sketch which I can open and run sketch doctor, I am unsure how to resolve issues with this sketch.
View 1 Replies
View Related
Nov 15, 2012
I have many symbols next to the bolted connections in my browser in Inventor 2013 which I do not see changing. what these stmbols mean and why there are there ?
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 4 Replies
View Related
