I have an alingment and profile, but I cannot use the layout tool to create a curve (vertical)...what I am doing wrong. I select the profile in profile view and right click to select "edit profile geometry" and get the layout tool bar but cannot select to draw a curve...
View 8 RepliesI noticed when you put in vertical parabolic curves onto the profile tangents it will ask you if you want length or k.
however depend on which one you specify. it will hold on to that value when it comes to changing the tangent locations. for what i am doing now i want k by default. but accidentally i put in length because i just went through all the pi's quickly to put in the curves. but i see no control which allows you to control which type to hold. this is a property inside the vertical curve but it's not exposed to user. once you create by length that's it. until you delete the curve and re enter using k then it will hold k.
I have a profile that has a 25' VC (please see attached jpeg) and want to put my PVI Station and Elevation but it doesnt fit in 40 scale (I need it to be in 40 scale). Is there a way I can only change the style for small vertical curves without changing my other styles?
View 4 Replies View RelatedCan we automatically add sample lines at vertical curve points (e.g. BC, EC, Bottom of curve) ?I need to show the sections at these vertical curve key points.
I am using C3D 2011 but could not find that option when creating sample lines in a station range.
i have an issue in with my created sheets that does not show vertical alignment data. everything on the bands shows up nicely but the lines, curves and labels profile are missin.
see the attached image. you can notice from the image that there is no a signle data..
I am creating construction plans sets that require 3 road profiles for the left edge, center and right edge. I would like to dynamically link the center line profile with the edge profiles.
I have created alignment offsets to obtain the existing surface at the offset location. I would like the edge profiles to have a vertical offset from the center profile. Also if I modify the center profile I want it to dynamically adjust the edge profiles.
why my text is vertically oriented when I'm doing a preview of my layout? Plus, I'd like to know why when I set greyscales on my CTB only hatches and not my lines are displaying in black & white? (on my second layout)
View 2 Replies View RelatedI've got a very long narrow site where more of it would be better shown and printed on a vertical page. However all the default and custom viewports are designed specifically for horizontal pages. How can a page be rotated to be plotted vertically?
View 4 Replies View RelatedI have a bit of a problem with Autocad map 3d 2012. When i try to insert a scale bar or a north arrow or any other carthographic element i simply can't find the layout elements that are supposed to be in layout tools tab. I've done a lot of research online and can't come up with anything.
View 2 Replies View RelatedI choose the vertical type tool or the vertical type on a path tool or the vertical area type tool...and all I get are letters that are rotated 90 degrees clockwise that go down in a vertical line. The effect is the same as if I took one of these lines that I am typeing here and rotated the entire line 90 degrees clockwise. That is not the effect I want. I am tying to get vertical letters stacked on top of one another in a line going vertical. I watched videos and they simply pick the tool and it functions this way, but when I pick the same tool I do not get this vertical orientation of the individual letters, but the 90 degree rotated letter.
View 5 Replies View RelatedAm new to PSE and having trouble creating collage pages (11 X 8.5). Can get the random look ones OK but cannot get the geometric (vertical/horizontal) as an option in layout. Am doing an album of Africa trip as a Christmas gift so time is getting short
View 6 Replies View RelatedI have CS5 for Mac. The crop tool from the left vertical tool bar mysteriously disappeared.how to get it back...
View 2 Replies View Relatedhow do I make straight lines? Horizontal Lines? Vertical Lines? Curvs? I read many tutorials and i am afraid that I am doing it the wrong way, my way is to drag a guide to where i want the line to be at and trace the guide with the brush tool...
View 2 Replies View RelatedIm using Civil 3d 2012 and I couldn't find the function that I could offset the smooth curve alignment as shown on the attached pdf. I've looked through the offset alignments but those linear, curve-cube-reverse curve, curve-line curve doesn't work much.
View 3 Replies View Related1.) I dragged out vertical and horizontal guides from the rulers and then created a new art board. The new art board now has the horizontal guides carried over from the first art board. How can I have separate guides on each of my art boards? I am using art board rulers.
2.) Is there a way to layout vertical and horizontal guides on an art board and copy them over to a new blank art board?
I have a question about the pen tool in Photoshop, I would like to make drawings as a simple colored dividing curves I found no simple way to achieve this, first found solution is to trace with Tool pen the desired shape (open form), then using the Layout panel, apply a color on edge, the problem with this method is that if you change the shape of the trace thereafter, the initial color persists mena sdoesn't move withe resized trace and it's embarrassing. the second found solution is to use a vector layer, but the problem is that traces are always closed(means closed shaps only) and the colored outline is applied on all around the shape , it works well with the closed form but not with the simple forms.
how to draw a single line or an open colored curve with photoshop.
I have alignment with 2 curves at the beginning and end that I want to keep. It has a few PIs in between ke that are not supposed to have curves, but Civil 3D added them in (very short 200 ft radius curves), but I need to take all but the first and last curves out.
I tried setting Constraint Editing - toggled OFF lock all parameter constraints. Then I went into the data and tried to change the parameter. Can't get the curve out. Is there a way to convert a PI from one with a curve to one without a curve?
I can't afford to redraw this alignment - it's being referenced via Data Shortcuts to multiple drawings being used by me and my designer / already has my design profiles and existing profiles attached to it.
How to do this? - Delete the curves and make them PIs only? (without curves).
Toolspace > Settings > General > Label Styles > Line
When I create a line label, one of the components available is “Direction Arrow”. This component is not available for “Curve” labels. I would really like to use C3D labels to indicate direction (I realize curves don't have a 'direction', but I don’t mind manually flipping and reversing the arrow). Is there any other label option in C3D that will draw a direction arrow for curves?
I'm working on a runway in Civil 3D 2011. I want to transition cross slopes along the runway. i.e. 1.5% for sta 1+00 to 10+00 and then transition into 1.0%. I thought super elevation would be the best way to do this (I dont want any actual super elevation, just transitions in cross slope). When I select the alignment and "Calculate/Edit Superelevation" i get the following message in the commanding line:
"_AeccCalcEditSuperelevation No superelevation data has been calculated for the selected reference alignment." It does not bring up the wizard.
My runway alignment doesn't have any curves and I'm thinking that's the problem. Is is possible to create super elevation without curves?
I am used to drafting surveys using Eagle Point Coordinate Geometry & Boundary Survey & I am now moving over to C3D, & I am trying to reproduce a boundary survey in C3D 2010, when it comes to Tangent & Non Tangent curves there does not appear to be any routine that allows you to create them in logical sequence or otherwise from the geometrical info provided on paper maps i.e. Radius, Delta Angle & Length, are there any survey techs on here that have been able to resolve this issue?
View 1 Replies View Relatedhow to get the Horizontal Curve Report saying left / right curve details in autocad civil 3d
View 2 Replies View RelatedI need to add the "r" value to the vertical curve labels in the profile (|G2-G1| / L).
Is there a way to add this property to the text component editor? I see a lot of different components listed, but no "r" value.
I am trying to darken/sharpen a .PDF scan of an old blueprint drawing using the Curves tool, but the drawing only appears edited in the preview screen and reverts back to its original appearance once I hit OK. What do I need to do to get the changes to stay?
View 3 Replies View RelatedHaving just entered the world of illustrator (cs6) I'm finding trying to get smooth curves to do what you want is a highly confusing operation.Being a fairly competant user of Photoshop the same task can be acheived relatively easily by way drawing paths with the pen tool and simply adding anchor points to drag out the desired shape.This buisness of dragging out handles in order to create curves in illustrator is crazy, I just can't seem to get the curves to behave how I want them to, I've watched probably 20 tutorials on this now and all demonstrate the same technique for creating curves, is there a more straight forward, simple way to achieve precise smooth curves similar to PS?
View 10 Replies View RelatedIs the trial version different? Mine looks nothing like the ones shown in the tutorials. I'm trying to find the curves tool and it's just not there.
View 7 Replies View RelatedI have a file saved in autocad 2013 (dwg file extension) that contains level curves and points similar that an autocad civil 3d file and also have the layers. I want to convert this file to a civil 3d file for doing section of the curves whit the program. I don't know if it exist a method or not directly or indirectly.
View 1 Replies View RelatedWhen i try to Add a Alignment Table for curves , and everry time i select the aligment or it's lable , it tells me that no Item Found,now what exactly i'm supposed to select ?
i use C3D 2012
Sony VPCCW26FA
Intel Core i5 M 520 @ 2.40GHz
8192MB RAM
NVIDIA GeForce GT 330M 512MB Dedicated
I have noticed since using c3d 2013 circle "markers" appearing at the curves on my alignments. I can't find the control to change / turn off?
View 1 Replies View RelatedI haven't used Autodesk directly since Land Development 2i. I remeber being able to draw lines by distances and bearings with the numeric keypad. The bearing quadrant / DMS input was a fast way to draw parcels from an existing map. When I got to a curve, I remember being able to input radius and Delta angle. I've been trying to find those functions for months now. I found the Line by Bearing command and that works well as long as I don't run into a curve.
How do you draw a curve that's tangent to the previous line with the radius and delta angle? I've been going back to AutoCAD version 12 methods. That is, offset the previous line. draw a circle from the end of the offset. draw a line between the center of the curve and the end of the previous line. Rotate that line with the 12d34'56" format. trim the curve and erase the extra lines.
I've gone through all the curve drawing options in the home menu.I found the CoGo editor in the survey menu but it doesn't draw curves. It just draws a line from the beginning of the curve to the center and continues the traverse from the radius point of the curve. That's obviously either a serious misunderstanding of input or a program bug.
I need to reproduce an alignment shown on some plans. I have not had any luck finding a tutorial about how to re-create an existing alignment.
I have a page of plans, it shows the center line going from a back tangent, into a spiral, through a curve, and spiral to tangent. How do I create an alignment from this data?
Spiral Curve
Delta: 1d33'47"
Length: 250.00'
o=0.57'
t=125.00'
Total Curve:
Delta: 24d09'01"
T=10105.34'
L=2,181.34'
o=4582.63'
Main Curve
Delta: 21d01'27"
D=1d15'02"
R=4582.06'
L=1681.34'
Spiral Curve
Delta: 1d33'47"
L=250.00'
o=0.57'
t=125.00'
I am a surveyor and I'm having a hard time understanding the alignment creation tools, in my data collector it is much simpler, you enter the back tangent and the end radius and the length of spiral and whale, but I'm trying to build a corridor, so I can stake the dtm.
I created a horizontal alignment from objects and upon importing it c3d seems to have taken liberty to arrange the lines in order it sees fit. Is there a way to rearrange the alignment tangent and curves and change their direction?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post