AutoCAD Civil 3D :: Lockup - Clean Reinstall
Jul 17, 2009
Having problems with Civil 3D 2010 locking up, it did when I right click in the data shortcut folder to set my working folder. When it locks up and I close Civil 3D 2010, I reopen it and Civil 3D 2010 stops loading at Loading AECC BASE UI, The only way I can use it again is to do a clean sweep uninstall and reinstall 2010. A repair does not work.
View 4 Replies
ADVERTISEMENT
May 20, 2012
Imagine a fresh machine and a fresh Infrastructure design suite 2013 install...sound sweet? It was for all of 3 or 4 minutes.Wonder what causes this squeaky clean system and install to freeze up completely, requiring nothing less than a reboot.
It happens every time I select any pulldowns in the quick access toolbar located at the very top of the screen above the ribbons.cause I need to give that "party crasher" the boot.
View 3 Replies
View Related
Jun 7, 2012
Tune up utilities got into my system and was finally removed by windows installer today. I tried 2 times to repair Autocad2011 civil 3d, then 3 times to reinstall it, finally removed all files I could find and tried 2 times to install. Cannot install I get eror 1402 about the key being too full or somtehing like that. It is the student version but I use it for my own use and need to access the files.
View 3 Replies
View Related
Dec 19, 2013
I have a bunch of parts drawings created in LT 98 that I am now editing in LT 14. For the most part I haven't had issues. However, I have been having a big issue with the Text function. It doesn't matter if I am trying to enter new text (Multi or Single line), or if I try to edit the existing text. Either way, the program immediately locks up & will not snap out of it.
View 2 Replies
View Related
Aug 29, 2003
My photoshop 6 has just started locking-up and not letting me close the program.
I have reinstalled photoshop.
View 3 Replies
View Related
Jun 22, 2012
When I send a job to net render with BB I'm getting a lockup
I send the job, connect then hit Submit and then get the lockup
The job still submits after some time but I always have to force the program to respond. Sometimes the program will respond with 'not connected' other times I'm forced to quit
The job still renders fine - Update installed a few days ago.
View 5 Replies
View Related
Oct 14, 2011
Windows 7 Professional
Manufacturer: Gateway
Model: DX4831
Processor Intel Core i3 2.93 GHz
RAM: 6.00 GB
Internal C: Drive: 1TB
External USB 1: Western Digital 1TB
External USB 2: Western Digital 1TB
Previous Version of Lightroom: 1.4.1
Current Version of Lightroom: 3.4.1
Overview of Problem
When starting Lightroom the application is responsive and loads quickly. Everything appears to be normal until either the "Import Button" is clicked or the import function is accessed via the File/Import Photos menu path. When either of these routes are taken to import a photo Lightroom becomes very slow to respond. The "Import Button" will cause Lightroom to take 30 seconds to open the "Select a source" screen, however, once a source (resident hard drive file containing .jpg photos) is selected Lightroom attempts to crash then recovers itself and after 30 seconds the source will display. Attempting to access another like file in the menu structure will cause another 30 second delay.
Attempting to click away from the "Select a source" screen back to the main Lightroom parent screen will cause an immediate white screen with "Lightroom Not Responding" on the main program bar.This will happen with a click on the Parent or when using the Cancel button. Once again, Lightroom will recover itself from the crash and eventually load the Parent screen.
Attempting to once again return to the Import screen will start the entire process again.
At this point Lightroom is unstable and unusable.
What I Have Done
Action: Uninstalled Lightroom 1.4.1 Result: Bug Still Active
Action: Uninstalled Lightroom 3.4.1 and Re-Installed Result: Bug Still Active
Action: Updated to Lightroom 3.5 Result: Bug Still Active
Action: Completely Uninstalled Lightroom 3.5 and 3.4.1 deep enough (registry and every Lightroom associated file) to require Serials to be re-entered Result: Bug Still Active
Additional Actions: I have attempted intallations with all external USB devices disconnected and connected.
Note: Although there are only 4 Action items detailed I have attempted many different ways to resolve this Bug but with no success.
View 24 Replies
View Related
Jul 7, 2013
I have used Photoshop elements for a long time. I continue to upgrade b ut each version seems to run slower then the one I'm upgrading from. Elements 10 is so bad that I have been using 8. I use Windows 7 Home Premium, I have 4 gig memory. I do not have problems with any other programs.
View 1 Replies
View Related
Jun 18, 2013
I found another issue(s) with the latest Photoshop. Incompatible plugins, lie Topaz Denoise from Photoshop 5.5, bring up an error dialog (problem with the filter module interface) which cannot be cleared with a click or a key press, rather, it just locks the program, requiring a force quit. Error handling can be more robust.
View 1 Replies
View Related
Apr 2, 2013
When I have a raster image power clipped into a vector frame and I attempt to trim that power clipped image. Corel locks up.
View 15 Replies
View Related
Sep 12, 2012
I've successfully installed AutoCAD Architecture, and others, and was wondering if the files created directly in my C: drive under the folder 'Autodesk' can be deleted, (running short of disk space)?
They look to be, by their names, install files and I note what looks to be the actual applications, etc., are present in the Program folder, under another Autodesk folder, and Program (x86) for Design Review.
View 1 Replies
View Related
Jul 19, 2013
I have a very large and complicated file from a civil engineer with way more information in it then I need. I want to pull layers I need out of the civil dwg and into a new dwg.
A few problems with the civil dwg are, all lines not in same x/y plane, everything not at 0,0,0, layers need to be combined, layers need to be purged, etc
Would just copy and pasting the layers I need into a new file be a good way to approach this?
View 9 Replies
View Related
May 22, 2013
I need to re-install my ACAD 2013. I get to the Product License Activation Options and have the activation code when I first installed. This time it dont work. I bet it something to do with multiple install. Error code is: 0015.11.
View 2 Replies
View Related
Mar 12, 2009
My task scheduler crashes as soon as I dbl click on it, does not even go to main window. Is there a way to only reinstall this part of INV Suite.
View 9 Replies
View Related
Mar 6, 2012
Our IT department ran a patch on our CAD station that corrupted AutoCAD and now it won't run and I need to re-install. I did not do the original installation or customization.
Q1: Will my customizations be preserved when I re-install over an existing installation?
Q2: If not, is there a simple way to preserve the customization by saving the .cuix file and custom blocks? If so, are there any other files that need to be saved as well?
View 1 Replies
View Related
Aug 28, 2013
I use a tool which clears Autodesk references from the profile & this fixes a variety of issues.
Generally if the problem isn't seen when logging on as a different user then the profile is to blame.
what the profile does & why it needs to be 'cleaned up' so frequently? Some machines appear to be effected more than others - looking for reasons why this is happening.
View 2 Replies
View Related
Apr 9, 2013
I'm trying to work with some geometry imported from another software. Somewhere there's a problem with drawing precision and imported geometry gets slightly warped. For example in the attached file four points of bottom face should be in the same plane, but they're out by 0.0006mm (in this case). Similar imprecision is evident on all sides (this should be a kind of a flat panel-type object with grooves cut on sides). Is there a way to get autocad to merge faces on a solid or somehow clean it up?
View 8 Replies
View Related
Aug 6, 2011
Lines are drawn together. So that the file is busy. I am looking for a command that extra line below the main line is being erased. As the top line is there to stay, and underline and additional lines to be deleted.
1.jpg
2.jpg
View 2 Replies
View Related
Apr 26, 2013
i have some overlapping lines which are in different layers. i want to clean them up, but wants the cleaned line to be remained in a specific layer. Can i know or change which layer will the cleaned line be remained in?
or can i simple select the duplicate line instead of deleting them?
View 4 Replies
View Related
Apr 24, 2013
Im looking for lisp for deleting overlay text. currently i have to do it one by one manually.
View 1 Replies
View Related
Aug 1, 2013
Wiped my whole computer clean, reinstalled Windows 7, Can't reinstall Autocad 2012 student version.
Installation failed and this is the line from the log:
2013/8/1:13:30:28 carol HENRY Installing Microsoft Visual C++ 2008 SP1 Redistributable (x86): D:3rdPartyx86VCRedist2008SP1vcredist_x86.exe /q
2013/8/1:13:30:48 carol
View 1 Replies
View Related
Dec 10, 2013
What is the best way to save or export all settings that were configured prior to a re-install so that the new install will work with the same as before.
Settings like cursor size, dynamic snap settings, printers, path locations, layout appearance, etc. We have both a autocad 2011 and autocad 2010 lt license. Is there a solution for both?
View 3 Replies
View Related
Mar 25, 2013
How do I reload a custom toolbar after uninstalling-reinstalling AutoCAD 2013?
View 2 Replies
View Related
Oct 16, 2012
I have a .Sat file I've brought into Inventor. The problem is that, as you can see from the attached zebra analysis, the faces are smooth and flush but I still have several unnecessary isolines. How can I get rid of them and I don't mean changing the view to have lines off I mean actually sealing the faces such that they erase the seam.
View 5 Replies
View Related
Aug 31, 2011
I just loaded 2008. With cleanscreen on, the close "X" button is grayed out and inop. Also, the minimize button which is still operable does not fully minimize AutoCAD. How can I get these buttons operable in cleanscreen mode?
View 9 Replies
View Related
Dec 21, 2011
I am using Windows 7 Pro. Recently I had some slowing down of system and found I had to clean up some Malware. System cleaned up but this error started show up on all trys to open program.
Complete error
Error 1317 C:/users/administrator/appdata/local/autodesk/autocad/2012.
I also tried to open an older version of 2011, same error came up.
I then tried to go to repair then reinstall with the same error preventing the repair or reinstall.
I then tried to uninstall 2012. Uninstall worked ok, but on reinstall the same code shows up.
View 1 Replies
View Related
Nov 23, 2011
I installed IV2012 with English. How can I change the default unit to Metric without reinstall?
View 3 Replies
View Related
Dec 2, 2011
I just got a new computer and installed Product Design Suite Ultimate x64. Every time I close Inventor, the window immediately stops responding, then will only go away if I stop the process. If I click "End Task" in the Task Manager, it will start to look for a solution to the problem, then immediately close. No error report displays. All other programs work with no issue. All of the settings are default as installed.
So far I have tried:
-Reinstalling with and without SP1
-Installing the latest Autodesk Certified graphics driver
-Using software graphics
-Running as Admin
-Launching in Vista and 2008 Compatibility Modes
Computer:
Lenovo S20
Xeon W3565 3.2GHz
Windows 7 x64
12GB ECC DDR3 PC3-10600
Quadro 4000
View 2 Replies
View Related
Dec 17, 2012
I can't find the correct location to put the files from the scale list cleanup utility in 2012.
I know it's supposed to go in the default installation directory but it doesn't seem to be working in any folder for 64bit.
View 1 Replies
View Related
Mar 19, 2013
I have a problem to run Map 2013 today.
"System.IO.FileLoadException: Can't load procedure from 'MapPublishImp.dll'.File name: 'MapPublishImp.dll' in Autodesk. Gis.Map. TextEdit. UI.Map PublishHelper.Finalize()"
Fatal error and Map is closed..What I have done:
- Try to repair and reinstall, nothing
- Uninstall Map 2013, delete all program's and user's folders and clean Windows Registry, clean install of Map 2013, NOTHING (???)
View 8 Replies
View Related
Feb 7, 2013
I was wanting to create a script to go through and clean up a bunch of drawings in a given folder. I've written a lisp routine (cleanx) that works fine when you run it on a single drawing, but I'm having some trouble integrating it into a script. As it is currently, I'm experiencing several issues -
1) It prompts the user for an 'object' after finding 0 objects. It seems to be caused by the line,
(command "-layer" "u" "*" "t" "*" "on" "*" "" "")
in 'cleanx' based on the text window, but I'm not sure why it does that given that if I run cleanx directly it doesn't prompt me.
2) It ends with saying 'Really want to discard all changes to drawing?' which confused me as I use Qsave before I close, and then confused me further when I realized that the text window suggests that this prompt comes up after the 'open' command, and that if I type <Y> (exit without saving) then it asks me to select a file. Why doesn't it save, close and then open the next file automatically?
;;; Main program, command: batchjob;;; By Abdul Huck(defun c:cleanb (/ dwgs file dwgName scrFile folderName) (setq folderName (browsefolder "Select folder to perform batch job: ") ) (setq dwgs (vl-directory-files folderName "*.dwg")) (setq scrFile (open (strcat folderName "\batchJob.scr") "w")) (write-line "SDI 1" scrFile) (foreach file dwgs(setq [code].......
View 5 Replies
View Related