AutoCAD Civil 3D :: Infrastructure Design 2013 System Lockup
May 20, 2012
Imagine a fresh machine and a fresh Infrastructure design suite 2013 install...sound sweet? It was for all of 3 or 4 minutes.Wonder what causes this squeaky clean system and install to freeze up completely, requiring nothing less than a reboot.
It happens every time I select any pulldowns in the quick access toolbar located at the very top of the screen above the ribbons.cause I need to give that "party crasher" the boot.
View 3 Replies
ADVERTISEMENT
Jun 25, 2013
The installation of IDSP has been an adventure. After a few rough starts Autodesk support team got us through the installation of 2 computers. Now I am attempting to install IDSP on my computer and have run into a number of errors that between this forum and Autodesk support I have worked through.
I start the install once again and looked like everything was installing ok.
That is until I get an message "Allied product is not found" and the install fails and removes all installations up to this point. The failure happened while installing the Civil 3D Language Pack.
Install log states:
2013/6/24:15:51:11 Administrator ______ Allied product is not found2013/6/24:15:51:35 Administrator ______ Install Autodesk AutoCAD® Civil 3D® 2014 Language Pack Failed Installation aborted, Result=1603
View 6 Replies
View Related
Jan 28, 2013
Infrastructure Modeler is a handy tool for creating nice 3D models for presentation. But how can we distribute these models for stake holders to review? Sure we can create nice video presentations but we want them to be able to nagivate the model freely. Is there any way to get the models into 3D PDF format?
The same issue arises with Civil 3D. Apparently it does not support output to 3D PDF. Do we have to purchase a driver for this?
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
View 9 Replies
View Related
Dec 19, 2013
I have a bunch of parts drawings created in LT 98 that I am now editing in LT 14. For the most part I haven't had issues. However, I have been having a big issue with the Text function. It doesn't matter if I am trying to enter new text (Multi or Single line), or if I try to edit the existing text. Either way, the program immediately locks up & will not snap out of it.
View 2 Replies
View Related
Jul 17, 2009
Having problems with Civil 3D 2010 locking up, it did when I right click in the data shortcut folder to set my working folder. When it locks up and I close Civil 3D 2010, I reopen it and Civil 3D 2010 stops loading at Loading AECC BASE UI, The only way I can use it again is to do a clean sweep uninstall and reinstall 2010. A repair does not work.
View 4 Replies
View Related
Jan 3, 2013
When assigning a coordinate system to my drawing in Civil 3D 2013, the drawing does not retain the selected system.
I choose the coord system I want in Map Setup and apply it (in this case MT83IF). After applying to the drawing I go back to verify the selected coordinate system and the dialog box indicates "N/A". The only workaround I can find is to save the drawing back to an earlier version and open it on another computer in the office that is running 2011. There I can assign my coord system and then reopen in 2013 where it now shows it properly assigned.
I have tried other coord systems to make sure it isn't isolated to just the one I am selecting - and it happens with all others I try. I have also tried a repair on my install to see if that would correct it to no avail.
I have a 64 bit system and have installed all service packs to date.
View 3 Replies
View Related
Mar 26, 2012
Any good numbering systems that they currently implement in product design, rather than the conventional architectural numbering system mostly seen on websites and forums.
View 3 Replies
View Related
Dec 3, 2013
how can I develope a proper piping system just like the one in the attached picture in AutoCAD 2013.
As you can see the tubes aren't that greatly connected.
Each tube is blocking the pathway of the other tube.
I need them to be all connected.
The reason why, is because I will be later using this design in Inventor Fusion and Simulation CFD to have fluid in the tubes.
View 9 Replies
View Related
Dec 2, 2013
making print templete in Autodesk Infrastructure Administrator?
View 1 Replies
View Related
Oct 2, 2013
We have six CAD machines in our office (not including several versions of LT), and only one machine "AutoCAD 2013" is having this issue:
ATTREQ & ATTMODE keep changing to undesirable values.
We generally use "ATTREQ 0" and "ATTMODE 1" and NEVER change these except "ATTREQ" gets changed in some LISP routines depending on the insert, but "ATTMODE" had to be looked up because we never change it from 1.
I know that there is no reference to ATTMODE anywhere in our customizations.
Does AutoCAD try to manage these system variables? Is there anything else that I can check to stop this?
View 6 Replies
View Related
Jul 19, 2013
I am upgrading the AutoCAD 2009 X 32 systems to the 2013 X64, and I have this vab code that won't work on the new system. I try to move the search path that contain the file up to the top and also got all the missing libraries, but the code still won't work.When I run the code it will give me error message like: compile error:
Function or interface marked as restricted, or the function uses an Automation type not supported in Visual Basic. The code work perfectly without any error on the old system so I sure the code is causing this error.
View 7 Replies
View Related
Apr 29, 2013
When I insert a location in CAD2014, there is a dialog for me to chose the position, the default coordinate is WGS84, and of couse there is a list for options. but if there still have no system I need. how can I add the one into this list ?
View 4 Replies
View Related
Mar 14, 2013
I install AutoCAD LT 2013 when I click install after few minute it show this error message.
The system cannot open the device or file specified. (Please see attached file)
View 1 Replies
View Related
Oct 23, 2013
By this I mean, if I set a new UCS with a new "north", can I lock it to this coordinate so it can't be changed?
Normally I would not do this, however, we're working with a company that has asked us to lay out an equipment grid on a couple sites they are setting up, as such: With 0,0 set to a predetermined point, and 100 ft increment grid laid out based off this point, using a laid out line on the site as an east-west, then creating a grid from this line and rotating it to create a "plant north."
Simple enough, except we sent them the dwg of the first one, and when they came back to us with their equipment setup, everything was inexplicably 4 degrees off and they blamed it on us. Oi...
So, yeah, to summarize, we'd like to lock our grid UCS.
View 3 Replies
View Related
Dec 20, 2013
We currently utilize AutoCAD for our mine mapping purposes. I recently had a seismic study performed to determine the top of salt. I asked for a .dwg file of the contours that were developed. The .dwg file they provided does not have our autoCAD map on it. They are simply contour lines. These contour lines, however, have the same coordinate system as our mine map. The surveyor and I provided coordinate data to the company to develop the contour lines. I would like to lay these contours into our mine map. How do I import the contour .dwg file into our mine map file so that they lay exactly where they should?
View 4 Replies
View Related
Aug 8, 2012
Where can I find a complete list of System Variables for ACAD 2013?
View 2 Replies
View Related
May 22, 2012
I was attempting to troubleshoot some performance issues I've been having using process monitor. I noticed that AutoCAD 2013 is constantly checking for an XREFSTATE System variable, that according to documentation is stored in the registry. however, process monitor is reporting this variable as not found. So that leads me to a couple questions:
why is it constantly checking the status of the variable
why is the variable not located within the path it is looking for.
View 2 Replies
View Related
Jun 21, 2012
Is there a way to find out the coordinate system and projection of a drawing sent to me? I do not have AutocadCivil3d. I have Autocad2013.
View 3 Replies
View Related
Jul 6, 2012
I am wondering why RPC content in Revit Architecture 2013 is not exporting, or linking when I open up the project in 3Ds Max Desing 2013. I have tried FBX, and linking that, as well as linking an .RVT file, =either "imported" the RPC objects.
Why doesn't 3Ds Max Design support these objects and is there any way to get them into 3Ds Max.
View 4 Replies
View Related
Aug 19, 2013
I recently installed AutoCAD 2014.When I open it a Design Feed palette comes up. (see attached image)I would like to disable this feature and not have the palette come up.
View 3 Replies
View Related
Feb 4, 2013
I still can´t import inventor materials to MaxDesign 2013.
Using STEP or DWG files accomplishes this but due to the fact that i use multi body objects the imported geometry is grouped in an awkward manner (multiple occurences of an object are grouped and i can´t ungroup them).
How to export right?
The issue is quite pressing and my posts in the AREA have not been answered yet. Is it an Inventor or a Max issue?
- 2500K @ 4.2Ghz- 8GB - Radeon7970 -
- Xeon 1230V2 @ stock Ghz- 32GB - Quadro 2000 -
View 1 Replies
View Related
Aug 18, 2013
Is it possible to design a Snowboard or a skimboard in Auto Cad? and Is there any tutorials on snowboard design for Auto Cad?
View 3 Replies
View Related
Aug 17, 2013
I'm having trouble finding a system variable.
I have blocks in a drawing that were made using the 'retain' method. WHen I go to insert the block I cannot see the block preview at the crosshair cursor. The block only becomes visible once I have clicked the left mouse key at the insertion point.
This means I can't rotate it either as I can't see it until I have clicked to place it.
Which system variable (And what setting) will allow me to see the block as I'm inserting it?
View 9 Replies
View Related
Jan 28, 2013
I need to export points from a plot in ASCII with the following format:
x_initial y_initial z_initial x_final y_final z_final radio type
This is for a substation grounding design.
A and B are the initial and final points of the 1st line.
View 2 Replies
View Related
Mar 20, 2013
my CAD 2013 and Revit 2013 crashs in the open screen only..i use Windows 8 .CAD 2013 days an error saying 'The security system (softlock license manager) is not functioning or is improperly installed,.. I did try ticking the netframes from the windows on/off settings and still end up with a softlock error..
View 3 Replies
View Related
Nov 28, 2012
At my previous place of employment I used ACAD 2010 and ACAD 2011 Design Suites. One of the programs had tool palettes and/or design centers that enabled me to build my structures choosing blocks of wall types, windows, casework and doors, trees via a palette all in 3d and 2d form. I was able to change my views all around the 3d model and walk thru it with a camera. I did several homes using this program. I don't know what the difference is but ACAD 2013 does not appear to have it.
View 6 Replies
View Related
Mar 12, 2013
In older versions of AutoCAD they had sample drawings in Design Center with blocks that were useful. They included a drawing for Home Space PLanning, Landscaping, etc. where these files or blocks are found in 2013? I want to use some of the sample blocks that I had access to in older versions of AutoCAD.
View 2 Replies
View Related
Nov 6, 2012
I have one user with AutoCAD Design Suite 2013. She is unable to run any of the Raster design commands.The Ribbon is loaded but commands are not working (unknown command).
AutoCAD as such runs fine.
View 1 Replies
View Related
Mar 25, 2013
is there a system variable to shut off the layer state preview? I would prefer to use the drop down and select the desired layer state, the preview slows this process down.
C3D 2011, 2013 (latest updates)
Win 7 Pro, 64-bit
16 GB RAM
View 1 Replies
View Related
May 23, 2012
How do I add my own system in Civil3d? We have a little strange system here with a deformation model, but I suggest that isn't a problem.
View 2 Replies
View Related
Aug 29, 2003
My photoshop 6 has just started locking-up and not letting me close the program.
I have reinstalled photoshop.
View 3 Replies
View Related
