I found another issue(s) with the latest Photoshop. Incompatible plugins, lie Topaz Denoise from Photoshop 5.5, bring up an error dialog (problem with the filter module interface) which cannot be cleared with a click or a key press, rather, it just locks the program, requiring a force quit. Error handling can be more robust.
View 1 RepliesI just reinstalled Photoshop CS6. I'm running OS X 10.8.2 .
I use the Nik plugins suite, and reinstalled them as well. Now whenever I try to use one of those plugins I get the error "Could not complete the ... command because of a problem with the filter module interface."
The reinstallation was a bit of a struggle due to issues on Adobe's end, and I am hesitatnt to just dive in and reinstall without some idea as to what might cause these errors.
I have Photoshop 7 installed ands till recently it was running fine but from just day before yesterday I cannot use the filters. Whenever I try to use it it says "Cannot complete action due to error in Module Interface", I have also tried by reinstalling photshop but it doesnot work.
View 2 Replies View RelatedI've been using Photoshop 7.0, and all of a sudden I can't open my pdf files, I get this message can't open ....file there is a problem with file-format module interface. Some of these pdf's I've opened before and they were ok.
View 3 Replies View Relatedaccording to the error message between Adobe Photoshop2 and Microtek Artixscan 4000t `acquisition module interface' is a problem and the copying to Adobe could not be completed. I suspect it is a missing codec but where does it exist for Adobe.
View 1 Replies View RelatedThe new LR4 develop module looks exactly like the LR3 . The quick what's NEW video shows a highlight and shadow slider and the exposure and contrast sliders are in different places.
View 3 Replies View RelatedI am running LR4 ver4.3. All of a sudden I receied an error message stating cannnot switch to module. I have tried all the usual stuff before going out to the web to look for fixes. On adobe's site they recommended 6 things which I did exactly as instructed and still nothing..I am running iMac mountain lion and everything on my computer is up to date.
View 1 Replies View RelatedI am running Lightroom 4.1 on two Macs, both running 10.7.4. On one of the machines the Alt/Option key does not work properly in the Develop module.
When I hold down the Alt/Option key and move the Exposure or Blacks slider I expect to see the clipping display. Instead this action moves the whole of the sidebar of the user interface. I can move it to any place on the screen and off the edge of the screen. Clearly this should not be possible.
The problem machine has a Wacom Intuos 3 tablet attached, so I have tried updating the Wacom drivers, and also removing the Wacom software completely. Neither solves the problem. My other Mac does not exhibit this problem.
PS11 and the EXACT same problems in PS9. This image shows the black on black problem of many drop-down menus. It doesn't affect all drop-down menus but it affects ALL font-related drop-down menus, and, for example, the adjustsments panel (but others also). Some drop-downs are fine (white on black, as it should be). Some aren't.
Backstory:
A catastrophic UI flaw if ever there was one. I use "catastrophic" because that's an error message I got from Acrobat 9 PX after I had a run in with the FlexSPY monitor Adobe uses on its software, when it didn't let me use Acrobat until I reformatted. The Acrobat 9 dialog said it can't proceed because it had a catastrophic error, and then the number 142:20.
When I do a filter search in the library module, the quantities are no longer appearing at the right side of the columns. They used to, but not in the past few days. I can not find where to fix this...
View 2 Replies View RelatedI often shoot with 2 cameras to save me changing lenses fequently. However, after I've uploaded my images into LR3 and switch to the 'Develop' module, the images are mixed up (I assume they are ordered by time taken.) How can I filter them by camera model in the image strip at the base of the module? Also, how does the 'Camera Info' option filter? And can it be set?
View 2 Replies View RelatedThe problem I have is with the graduated filter in the develop module of LR 4.1.
I have installed CS6 and LR4.1 on both my new Macbook Pro and Mac Pro.
When using the Macbook Pro the the pin marker appears as it should.
On the Mac Pro no pin marker appears but the rest of the action is performed.
I have been using the CS4 trial for just over 2 wks now and all of a
sudden I am getting this error.
The specified module could not be found.
C:Program FilesCommon FileAdobeAdobe Version Cue CS4Client4.0.1Version Cue.DLL
When I open a picture I get this message and CS4 closes. I have tried re installing hoping it would find the missing file, no such luck.
I have Vista
I am sort of in a panic...I tried to go resize some pictures to order for a client, so she can have them before she leave town on the 5th and this is what happnes.
I did go down load Adobe reader 9 and it tried up update what seemed like everything Adobe. IDK I had not opened CS4 before this, but the day before it worked just fine.
My photoshop 6 has just started locking-up and not letting me close the program.
I have reinstalled photoshop.
I have run CS4 on my windows Vista pc for years without a problem. Yesterday I downloaded DNG converter 7.2 as I have purchased a Fuji Xpro and needed to be able to process the Raw files - my version of ACR is not compatible. Today I tried to look at an old image processed from a year ago in CS4 and got the error message:
"The specified module could not be found C:programfilescommonfilesAdobeAdobeVersionCueCS4Client4.0.1Ver sionCue.DLL"
I have tried to open many different images from Bridge into photoshop and from the photoshop file menu - photoshop opens with the image, then this error comes up, I click ok and photoshop closes.
When I open a project in Photoshop CS3 it says "Cannot find the missing module blablabla versioncue.dll". I've searched around a little and found someone who said that 2 updates would fix it. I downloaded the updates but when I started to install it said "Can't find the product to update".
For some extra info, I just reformated comp and I've considered it might be something about missing files or something and if so, can someone add davvemannen@hotmail.com and send to me because this is important. This is also because I have a schoolproject where Photoshop will be needed.
I'm also suspicious if I actually have the documents and settings files for CS3 since I only copied the whole files from programs when I reformated it.
I have used Photoshop elements for a long time. I continue to upgrade b ut each version seems to run slower then the one I'm upgrading from. Elements 10 is so bad that I have been using 8. I use Windows 7 Home Premium, I have 4 gig memory. I do not have problems with any other programs.
View 1 Replies View RelatedGot the following error: "The filter you were using encountered an unknown graphics processor error that caused an unexpected exit. Check the manufacturer's website for the latest software.". What can I do about this?
View 1 Replies View RelatedWhen I open ps in creative cloud I get these messages:
1- Runtime error R6034
2- could not load multiprocessor support module.
I say/click ok and then the program opens, but I want to resolve this from happening every time I open ps.
I too am getting the oil paint error when I try to use the filter. I have a new Toshiba L675 with Windows 7.
View 1 Replies View RelatedI'm using Photoshop CS6 on a PC. When I tried to apply the oil paint filter, I got an error message saying
"The filter you were using encountered an unknown graphics processor error that caused an unexpected exit. Check the manufacturer's website for the latest software."
My pc crashed, upon reboot I'm unable to run PSCS6 lens correction filter. The error reads "The end of data was reached while reading from a container". The crash occurred while using the lens correction filter, the pc locked up. When I rebooted everything worked fine except the lens correction filter.
View 1 Replies View RelatedWhen I send a job to net render with BB I'm getting a lockup
I send the job, connect then hit Submit and then get the lockup
The job still submits after some time but I always have to force the program to respond. Sometimes the program will respond with 'not connected' other times I'm forced to quit
The job still renders fine - Update installed a few days ago.
Every time I start up photoshop I get the following dialog box showing up:
And the following comes up with any filter i try to use:
I have tried re-installing the softwear, unfortunately that didn't fix the issue.
I have been having a problem with large file being burned onto a DL dvd disc. Eery once in a while when I try to burn the file it will go so far and then stop with a unspecified error 5.0.0 cannot complete. It will work sometimes and at other times it will quit working. I have been using verbatum DVD+R DL disc which have worked but not all the time. It is frustrating throwing away disc because it is getting an error.
View 2 Replies View RelatedWhenever I try and click on the "Render Settings" button, it gives me this error at the bottom right of my screen. It appears in red, so I am guessing it is a critical error or something along those lines.
But once I click the "Render Settings" button once more, the window pops up (with the addition of the error) but with absolutely no options or tabs to choose from or click on. With the exception of the render layer option and the render type (Maya Software and so on). This leads me to believe that this error (being: Error: ImportError: No module named stereo), is preventing Maya from functioning properly and preventing me from modifying all of the appropriate render options.
Everytime I have tried to use Lightroom2 and recently Lightroom 5 I get 'an error occurred when attempting to adjust module".
View 1 Replies View RelatedI have isolated two issues in AE CC where I can duplicate a failed render with this message:
After Effects error: Rendering error while writing file "xxx". An output module failed. The file may be damaged or corrupted. (-1610153464)
This happens when opening an AE CS6 project and trying to render a simple comp with only one text layer and a moving mask. It also just happened after my first round trip test with Cinema 4D. I could RAM preview the c4d layer but the output to Quicktime h.264 failed.
I have even tried a full reinstall of AE CC. I have the basic FxFactory Pro plugins and MagicBullet Looks installed, but neither are being used since this is a single 1280x720 comp with a single C4D layer. Plus like I said it failed with the same error in past CS6 files.
I don't know how to force disable a plugin to test that, but I can't see how an unused plugin could cause a render to fail like this.
I'm on a new (late 2012) 27" iMac
3.4 GHz Intel Core i7
8GB RAM
NVIDIA GeForce GTX 680MX with 2GB VRAM
OS X 10.8.4
AE CC 12.0.0.404
CUDA driver 5.0.59
Windows 7 Professional
Manufacturer: Gateway
Model: DX4831
Processor Intel Core i3 2.93 GHz
RAM: 6.00 GB
Internal C: Drive: 1TB
External USB 1: Western Digital 1TB
External USB 2: Western Digital 1TB
Previous Version of Lightroom: 1.4.1
Current Version of Lightroom: 3.4.1
Overview of Problem
When starting Lightroom the application is responsive and loads quickly. Everything appears to be normal until either the "Import Button" is clicked or the import function is accessed via the File/Import Photos menu path. When either of these routes are taken to import a photo Lightroom becomes very slow to respond. The "Import Button" will cause Lightroom to take 30 seconds to open the "Select a source" screen, however, once a source (resident hard drive file containing .jpg photos) is selected Lightroom attempts to crash then recovers itself and after 30 seconds the source will display. Attempting to access another like file in the menu structure will cause another 30 second delay.
Attempting to click away from the "Select a source" screen back to the main Lightroom parent screen will cause an immediate white screen with "Lightroom Not Responding" on the main program bar.This will happen with a click on the Parent or when using the Cancel button. Once again, Lightroom will recover itself from the crash and eventually load the Parent screen.
Attempting to once again return to the Import screen will start the entire process again.
At this point Lightroom is unstable and unusable.
What I Have Done
Action: Uninstalled Lightroom 1.4.1 Result: Bug Still Active
Action: Uninstalled Lightroom 3.4.1 and Re-Installed Result: Bug Still Active
Action: Updated to Lightroom 3.5 Result: Bug Still Active
Action: Completely Uninstalled Lightroom 3.5 and 3.4.1 deep enough (registry and every Lightroom associated file) to require Serials to be re-entered Result: Bug Still Active
Additional Actions: I have attempted intallations with all external USB devices disconnected and connected.
Note: Although there are only 4 Action items detailed I have attempted many different ways to resolve this Bug but with no success.
I've installed PS CC and have an AMD Radeon HD 7970M card in my laptop. PS detects the card in Preferences and I'm able to choose it for acceleration (i.e. OpenCL, etc.).
When I try and go Filter -> Liquify on any image, the Liquify dialog pops up, but i don't see the image. All I see is a black in the dialog.
When I turn off acceleration, and go to Liquify, it works.
I open an iPhone pano image. go to filter–>adaptive wide angle filter and in the lower left corner I find – as indicated as being requested to function properly the tut – the name of the camera, the lens and the f-stop with wich the image was taken. The filter does still not draw the automatic line on the corved part of the building I try to improve. Going to correction –> automatic in the upper right corner I get an error message that no matching profile for the iPhone's camera's lens could be found.
Why that when it is clerly indicated as being 4.28 mm etc already? The iPhone 4S has been here for quite a while and is widely used, so why the error?