I am trying to figure out how to had multiple vertices to a feature line. I'm thinking its right in front of me, but I'm just not seeing it. I have been adding vertices by "insert elevation point" manually and it is a really nice feature in that it picks up the elevation that is already attributed to the feature line, but it would be nice to speed up the process.
View 2 RepliesIs there a way to have multiple vertices selected at multiple positions (heights) in the z axis and enter a value of 0 and have all of them jump to 0 in the z axis? Seems like a no brainer to me, but can find a way to do it.
View 9 Replies View RelatedI need a scatter distribution object like a railroad.
I draw a smooth line, then converted it to spline: using sub-object "spline", i used "Outline" to give it some width. Next step, it was converted to a Editable Poly.
At this moment, if i select its vertices and call "Connect", the result is a zig-zag sequence of edges, which are very difficult to clean-up. Another way, select each pair of vertices to apply connect is similar time consuming...
Maybe the picture aid to show the problem.
How to connect those verts like a railroad??? Or about how to create an appropriate scatter distribution object to this work?
The Straighten method seems to always default to the first vertex of the polylne, which is great if you want to start there but what if you wanted to delete the 10th to 15th vertex? Is this even possible using PEDIT Tools (it is very possible using the WEEDFEATURES method)
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
how do I turn off the new "stretch" vertices?
I am finding that I click to select a line, and start typing commands, only to find out they aren't registering b/c I have selected that un-needed extra vertex in the middle of every pline segment.
I have checked the Options, and cannot find how to turn those off. They were not in 2008.
Civil 3D 2011
I have a drawing with 3D polylines that will be used to build a surface but many of them cross each other.
I would like to extract the vertices of these polylines and use this information to build the surface but can't figure out an easy way to do this.
I have tried the Points at Vertices Automatic which is ok but as there are 300 or so 3D polylines this will get very tedious very quickly - is there a better/quicker way to do this?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I would like to get original vertices(vertex) from breakline.
With SurfaceBreakline.Vertices property I can get a ObjectId collection of them but generally will contain more vertex that original vertex because it depend of "weeding factor" values and "suplementing factor" values.
How can I get only original vertex from breakline?Perhaps, API should have other property to get only original vertex from breakline.
In the command GRADING>EDIT FEATURE LINE GRADING>INSERT ELEVATION POINT
I can specify the Increment value which is what I want but this only allows me to select one line. How can I select multiple lines and specify an increment value?
I am manually editing my section geometry by moving the grips and am wanting to remove some of the additional vertices that I don't need in a certain area. How to delete extra points? I can't seem to find a way to do this either graphically or in the Section Editor. I am using C3D 2010.
View 4 Replies View RelatedWhat I want to do is change multiple splines from "Show Control Vertices" to "Show Fit Points"
The problem is I have over 500 to do, and I cannot select each one individually and do it. It would do my head in.
Is there any way to change multiple splines all at once?
I would like to take all the vertices out of a multiple-vertices polyline so that it reduces to just its start and end points, can this be done?
View 4 Replies View RelatedAs far as I know there is no way to add or remove vertices on contour label lines. Is this correct?
If so it's another one for my wish list.
Neil Wilson (a.k.a. neilw)
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
[URL]....
Is there a way to display vertices and elevation points of featurelines so I can see where to apply labels to individual segments? Without the markers it is a trial and error process of placing labels, then picking the line to activate the grips to see if I missed any segments.
I know I could create a label style that labels all the vertices but that just adds clutter. I'd really like to see some sort of marker if possible.
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
I know there are different ways to do this. Would like to know multiple options so I can see which might be quickest for me.
I have points with elevations and 2D plines at elevation zero drawn between them.
I would like 3D plines instead. This is the easiest way for me to transfer them to another drawing where I will make surfaces with them. I don't want to have to transfer the points over.
I can redraw the plines as 3D plines but this is time consuming and seems unecessary.
I don't want to have to convert them to Feature Lines either. I prefer they be 3D polylines.
Is there a simple command for this? I already have a surface containing the points and lines as surface breaklines.
Is there a project objects to surface command that will make these 2D plines at elev 0 into 3D plines while assigning elevations (and vertices) only at the current vertices?
What about a simple series of commands to convert the 2D plines to 3D plines, then force the 3D pline to take on the elevations of the points at its vertices? (I think this would be my preference, but don't know any of these commands or where to find them.)
Windows 7, 64 bit, Civil 3D 2010
I'm trying to create a surface using feature lines. I have an alignment and profile that I have created a dynamic feature line. However, on a horizontal curve, it apparently creates a vertex at the start and beginning of the curve, and nothing on the curve, so it triangulates between those two points and that's it.
Do I need to play with spiral tessellation (0.25), mid-ordinate distance (0.1) to get some points along the curve?
I need to create points with surface elevations along sample lines. The points need to represent the verticies one would see in the section editor. I've attached an image of my section editor for one of my sample lines. I need to create points that represent these 24 verticies along this sample line and do so for the rest of my sample lines as well. Is there an automated process to create these points?
View 1 Replies View Relatedhow to show arrows (solid or stick) between vertices in Profile views. It seems other design packages can do it so I hope C3D can as well, however I can not find anything detailing if it can be done or how. I attach and example so you can see what I mean. Arrows show sections of differing flow/pipe size & grage for each pipe.
View 1 Replies View RelatedLooking for step by step for multiple page setup setting in multiple layout, i use autocad civil 3d 2012.
View 1 Replies View RelatedI need to figure out a way to sample multiple surfaces for multiple alignments.
Example 1: I am creating cross sections for a river dredge showing the pre-dredge bathymetry, design dredge elevation, and post-dredge bathymetry results. I have 100's of alignments that I need to sample 3 surfaces and display in profile view. Due to the clients requirements for display, using the cross section tools don't work for me, so I have resorted to using a seperate alignment for each cross section.
Example 2: Working in a subdivision with many utility alignments it would save quite a bit of time to be able to choose a group of alignments and sample multiple surfaces in just a few clicks.
I am using Civil 3d 2012. What I have is a surface along railroad tracks. Each set of tracks has a different alignment because they aren't parallel. I have a baseline alignment with my stationing set on that. What I want to do is have one profile view showing the multiple track alignments based on the baseline alignment. I can't use the offset alignment because they aren't parallel.
View 1 Replies View Relatedthe issue is when i try to publish multiple dwg files which containing civil 3d objects including data ref to pdf it won't do it other whatever drawing is currently open.i kinda can see why. because the data ref reading is not programmed in when "invisibly" opening the cad files. xref are autocad native and it works.
so no warnings or anything. just publish the first one and told me it's done. i've seen this years ago when first started using civil 3d but then i just never complained here.
is there a solution for this? what i did before was obviously open each drawing. then publish, huge waste of time. making me hate my job because of repetative tasks. i almost always try to automate.
yesterday made a program to make one surface for each csv file there was hundres of them and basically 2 hour programming and 1 minute to process the files once got the program working.can read subfolders to find csv file too.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
I'm finding myself on more and more sites that use multiple coordinate systems and height datums.
We have 3 on this job. One is the MGA zone 50 GDA94, another is just an offset of this and the third is a strange local grid with offsets and rotations.
We have Excel spreadsheets that can convert between the systems, but that requires several extra steps per point.
Is it possible to define each coordinate system in one drawing so that I could select which system I wanted to use, input the points and then select the main coordinate system so it converts the coordinates directly? It would mean less steps and I would have greater confidence in this system.
We have the parameters for all systems.
[ URL]............
One of the problems we face in 2010 is the part labeling issue, where it labels the family name for a part and not the description name. The way to get around this was to do a swap part. Well for me when i lay out a storm network, i create it by pipes only and then swap the parts that i need to. The only flaw about this is that you can only do one swap part at a time.
Well if you go to civl3dreminder blog site there is a fix for that. I actually tried it and it worked. I was actually able to swap pipes and structures at the same time. This routine will definitely come in handy.
How do I create sections that show multiple surfaces?
All surfaces are existing, none are design. (existing ground, grubbed surface, bedrock surface)
How I miss LDD.
Is there a way to delete multiple VIP's in a profile? By windowing maybe? I have a profile with several hundred VIP's and I need to delete the VIP's between certain chainage but I'm not clear if this is possible. It will take hours to delete them one by one, although as far as I can ascertain this is the only way.
View 6 Replies View RelatedI have a corridor with multiple assemblies along a 4 mile stretch of road. In certain locations the corridor is not not modeling the sidewalk. I checked all the targets and everything is good.
View 1 Replies View Relatedhow to get the sections to center or to add a x, y offset distance.The only options I have found for placement are lower left, lower right, upper left, upper right.
View 1 Replies View RelatedIm trying to make a label that will call out pipe replacement in reference to an alignment. I know how to call out from multiple alignments, but I need multiple stations from the same alignment, such as sta xxx to sta xxx.
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
why am i not allowed to have multiple direct links for a node (junction/outfall)? i have a situation where i want to add the flows to two junctions, one for each side of the property, then add the two junctions to an outfall (overall site). i do not want to model the pipes, just want to add hydro graphs.
my each junction has two direct links coming from two other upstream junctions, and then this junction flows out by a direct link to the overall site outfall (the set of junctions from the other site does the same). i cannot run the model because of the error:
ERROR 134 : Node TOTAL-EAST has more than one DIRECT outlet link or DESIGN pump.
ERROR 134 : Node TOTAL-WEST has more than one DIRECT outlet link or DESIGN pump.
I'm using AutoCAD Civil 3D to model inner city utility construction projects. For my research project, I need to include water and storm pipes, but also various sorts of cables. Currently, I'm manually creating cables profiles using plines from existing 2D drawings and the sweep function.. a very cumbersome taks.
I was wondering whether there is a way to speed this process up. At the moment, I draw a circle, copy it myriads of times, and sweep each along the dozens of plines (one by one). I cannot select multiple lines and sweep them all, can I?
whether I can select mutiple plines to sweep all at once?
I have a super-e road assembly as shown that is running into the intersection of a future road stub. I can not figure out how to get the sidewalk to grade out in the intersection transition I have created for the curb return. Any way to get through this situation?
View 2 Replies View Related