AutoCAD Civil 3D :: Multiple Surfaces On One Section?
May 16, 2012How do I create sections that show multiple surfaces?
All surfaces are existing, none are design. (existing ground, grubbed surface, bedrock surface)
How I miss LDD.
ADVERTISEMENT
AutoCAD Civil 3D :: Sample Multiple Surfaces For Multiple Alignments
May 18, 2012I need to figure out a way to sample multiple surfaces for multiple alignments.
Example 1: I am creating cross sections for a river dredge showing the pre-dredge bathymetry, design dredge elevation, and post-dredge bathymetry results. I have 100's of alignments that I need to sample 3 surfaces and display in profile view. Due to the clients requirements for display, using the cross section tools don't work for me, so I have resorted to using a seperate alignment for each cross section.
Example 2: Working in a subdivision with many utility alignments it would save quite a bit of time to be able to choose a group of alignments and sample multiple surfaces in just a few clicks.
AutoCAD Civil 3D :: Creating Section Sheets From Multiple Section Views
May 21, 2012When i am creating section sheets from multiple section views ,section sheet view port scale changes.I did set it correctly in my template.
For example it changs from 1:150 to 1:150_1
Then in section sheets scetions views are not displaying correctly.
When i change view port scale manually it shows correctly.But it should do to all sheets.
What should I do?
In model spacr multiple section views are showing correctly.
AutoCAD Civil 3D 2012 SP 2
Sri Lanka
AutoCAD Civil 3D :: Surfaces In Multiple Files
Aug 7, 2013How practical is it to create and manage surfaces across multiple DWG files? One of the reasons I'm asking is some of our users are insisting their work can only done in a single file, resulting in massive DWG files and naturally, Civil3D slows to a crawl. I'll admit I'm not a full time Civil3D user or specialist - thats not my job. I'm reasonably certain it can be done from the most basic of research (which apparently nobody else wants to do...), but am Uncertain what the potential pitfalls are.
They complain of slowness and are requesting better computers from IT (I've talked them down to more RAM). I'm trying to forestall a potentially nasty political situation spiraling out of control: they get better computers, others will want them as well and either get them only because of connections, or won't get them and are resentful for the perceived lack of importance. We don't need people doing 2D schematic drawings on gaming rigs.
AutoCAD Civil 3D :: How To Export Contours With Multiple Surfaces
Sep 8, 2013where the contours of each surface are separated into different layers? Usually it just produces two layers for all of the contours, major and minor.
View 1 Replies View RelatedAutoCAD Civil 3D :: Multiple Surfaces Lowest Elevations
Apr 30, 2012I have many surfaces overlapping and I want to create one surface with the lowest elevation for each x,y coordinate from the existing surfaces. Does autocad civil 3D have a command for this?.
View 3 Replies View RelatedAutoCAD Civil 3D :: How To Figure Multiple Volumes From Two Surfaces
Sep 26, 2013using CIvil3D to figure volumes. I have a very large aerial topo from a couple years ago to compare against a topographical survey I completed this year. No problem creating surfaces.
Question: In the topo's, I need to get a volume from two different areas....one area being a fill area, the other being the borrow area. Don't want any volume data throughout the rest of the site.
Do I just create one large surface for each topo and designate boundaries somehow? Or do I need to create multiple surfaces for each topo? If this is the case, will I need to make sure any breaklines, etc. don't cross from one area to the other?
AutoCAD Civil 3D :: Combining Multiple Surfaces To Create Final Surface
Nov 28, 2012I am creating my Final Grading surface with from 2 surfaces - a proposed road surface and a proposed grading surface. (Note of roads within the road surface)
The issue is that when I paste the proposed road surface (that consists of several looped sections) over the proposed grading surface, the proposed grading surface within the looped road areas dissappears.
I have tried several options using boundaries for the inner looped areas on my road surface, and has altered my order of opterations for my final surface edits, and many other things also.
I have attached an image for reference.
AutoCAD Civil 3D :: Data Bands - Multiple Surfaces Sampling From One Design Profile?
Jun 26, 2013I have 2 different surfaces (Existing Ground & Proposed Pipe Invert) that I want to have the elevations shown for in a profile data band, but I want them to show at the design profile's PVIs (Proposed Road). Is it possible to set up a data band style that samples at one profile's geometry points but displays the elevations from these points from a different profile? My workaround is to set the data bands to all sample from the design profile first and label over the design profile's data band but I'm hoping for a cleaner solution. Attached is an image showing the profile view in question.
View 5 Replies View RelatedAutoCAD Civil 3D :: Multiple Section Views
Dec 16, 2013how to get the sections to center or to add a x, y offset distance.The only options I have found for placement are lower left, lower right, upper left, upper right.
View 1 Replies View RelatedAutoCAD Civil 3D :: Create Multiple Section Views
Nov 5, 2013When I create multi sect views they plot 3 rows from left to right shown below:
0+00 1+00 2+00
I would like it to plot from bottom to top like shown below
2+00 5+00
1+00 4+00
0+00 3+00
Is there somewhere to adjust the settings?
AutoCAD Civil 3D :: Multiple Cross Section Labels?
Jan 31, 2013Using 2011 - Having trouble with cross section labeling. I have multiple label markers such as ROW, and multiple EASEMENT types. I've created corridors for each label type - each will show up if their corridor has a corridor section line at the same station as the base corridor, but at odd ball stations (like driveway openings) the labels do not show up, I'm thinking its because I don't have these corridor section lines in each corridor. Is there an easier work around rather than manually adding the section lines in each corridor?
View 3 Replies View RelatedAutoCAD Civil 3D :: Multiple Section View In Custom UCS
May 14, 2013I has a project where my Custom UCS don't is the Autocad's Original, but when I make Multiple Sections Views, the C3D does it in Autocad's Original UCS. How I make this on my Custom UCS?
Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz
4,00Gb RAM
Windows 7 - 64bits
AutoCAD Civil 3D :: Multiple Section Views / Draft Option
Sep 5, 2013When creating multiple sections using the draft option what settings control how the sections are placed? For example, 5 across, 4 down.
edit - I have several alignments. One that has 8 section views is created with 4 across and 3 down, another with 18 sections is created with 5 across and 4 down and a third with 34 is created with 6 across and down. I'd like to be able to control this if possible.
AutoCAD Civil 3D :: Crash While Creating Multiple Section Views
Jun 9, 2013Every time I try to create multiple section views in Civil 3D 2014 the system hangs and never generates the views. It looks as if it's processing but it never stops and never generates.
View 4 Replies View RelatedAutoCAD Civil 3D :: Volume Tables For Multiple Section Views
Jan 23, 2012I am working on a corridor project where I have to make section views of the road. I created my sample lines by range of stations, and made all of my section views from there. Now I need to add volume tables for each section view.
I have 28 section views, and more to come when I do another set of sample lines for another road, and I don't feel like going through each section view individually to make volume tables for them.
Is there a way I can create total volume tables for all of my section views at the same time? It would save a lot of time!
AutoCAD Civil 3D :: Multiple Section Views - How To Amend Design
Oct 13, 2013I have created multiple sections and produced drawings, but now need to amend the design and provide 1 additional section on the drawings. I added an additional sample line to the sample line group and then updated the secion view layout but the additional section did not show in the multiple section view. Is there a way to add the additional section to the existing multiple section view? or do I need to go through the process of deleting the current sections and creating a new multiple section view that includes the new sample line?
View 1 Replies View RelatedAutoCAD Civil 3D :: Project Solids To Multiple Section Views
Jun 13, 2013The new features in 2014 does not work. I can project solids to a section view but not to multiple section views.
View 1 Replies View RelatedAutoCAD Civil 3D :: Create Multiple Section Views From A Corridor
Apr 16, 2012I am attempting to create section views from a corridor. I have about 80 sections total that I would really like to stack 3 high...then just across the page. Any step by step that make this process easy to understand?
Right now I get 10 high then across the page (using 'draft' option). I've tried to make a dwt at a 10 scale, (setting the viewport at 10 scale and viewport as a 'section' in the properties), but when I use that, the sections start overlapping (this is using the 'production' option).
AutoCAD Civil 3D :: Removing Projected Objects From Multiple Section Views
Jun 19, 2012I have projected objects to multiple section views (ProjectObjectsToMultiSect) but now I want to remove them all. How do I remove all of the projected objects?
I can select an individual section view and go to the Projections tab in the Section View Properties and uncheck the projections, but how do I do this for all the views at once.
AutoCAD Civil 3D :: Create Multiple Section Views - Production Mode?
Apr 11, 2013When creating multiple section views with production as the placement option, all the sections superimpose on top of each other. Attached graphic.
I tried to attach the .dwt file used for the multi section view, but the site doesn't allow upload of file extension .dwt.
AutoCAD Civil 3D :: Creating Multiple Views (sections) In Section Display?
Mar 3, 2012Sometimes when i creating multiple views (sections) in section display option page there are nothing displaying.(surfaces).
View 2 Replies View RelatedAutoCAD Civil 3D :: Drawing Template For Multiple Section View Production
Feb 21, 2012How can I create a dwt file for the production of multiple section views sheets in A3 format and 1/200 ?
Civil 3D Section .dwt (Template/plan production) has only layouts for A0 and A1 plan and scales 1/500 - 1/1000 and 1/5000. I tried to change the format to A3 and scale to 1/200 of one of those layouts in the set up manager but didn't get a good result while producing section sheets.
AutoCAD Inventor :: Embossing Onto Multiple Surfaces
Dec 18, 2012Is there any way of embossing onto
1. Multiple faces
2. surfaces that are not flat, cylindrical or conical
I have tried using the “stitch surface” command but I can’t seem to get it to select .
The surface was created using the loft command, but I don’t know how to select it as a composite surface . When I am doing the emboss. Maybe it has to be done using another method besides emboss?
AutoCAD Civil 3D :: Pipe Section In Full Height In Section Views?
Feb 20, 2013I have lots of section views with some surfaces and pipes. Unfortunately, in a number of section views pipes are not shown in full height because the section view level range is too little. What I am wondering is - is it possible to automatically adjust section level ranges so that they fully include pipe sections? Please see also the image in the attachment.
View 2 Replies View RelatedAutoCAD Civil 3D :: Alignment Style - Section - Line Marker In Section
Mar 26, 2012C3D 2012...but this feature has probably been in C3D for sometime
1-What is a 'Line Marker in Section' Section component of an Alignment Style?
2-How is it used (example )?
AutoCAD Civil 3D :: Adding Cross Section To Section View Group?
Jul 17, 2013Is it possible to add additional cross sections (sample lines added after views were created) to an existing Section View Group?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
AutoCAD Civil 3D :: Section Editor Vs Section Views Labels?
Aug 12, 2013In my section editor my labels show up correctly and in all the locations I want. But then, in my cross section file, I look in my section views and they are completely different. When I try to label more points under the Code Set Styles, they won't even show up on my section views.
View 6 Replies View RelatedAutoCAD Civil 3D :: Can't See Corridor Section In Section Views Only Existing
Mar 5, 2012I think I just haven't done this in a while and can't find the right setting.
I have existing sections.
I have section views.
I created a corridor.
How do I add the corridor section to my existing cross-section in the section views?
I can view them in the corridor section editor. But I should also be able to add the corridor section to my section views, right?
To plot them, do I NEED to do this through Sheets Sets? I don't have experience with sheet sets yet.
I don't use Civil 3D often enough anymore. Still learning much about the new interface and pulling a design together.
AutoCAD Civil 3D :: Corridor Section Editor Not Displaying A Section
Mar 8, 2012I've got a corridor where the section editor does not show a section that the corridor has created. My frequency is set to 25' with high/low points along curves. At station 22+75, in the model space the corridor shows a section being created (image #2). However, I cannot edit or even see that section in the section editor (image #1). The first screen shot shows the list of stations for the corridor in the editor while the second screenshot shows the model space at the problem station. This is in the middle of a region, so there shouldn't be any issues with other assemblies or regions.
In the section editor, Sta 22+74.91 is listed, skips 22+75, then lists 23+00. I am needing to manually adjust the cross slopes of my lanes. If I view the surface there is a weird dip because at station 22+75 the default slope of my lane is -2%. I cannot edit station 22+75, so I cannot adjust the cross slope of the lanes.
What is causing the section editor to not even recognize a section? How can I edit the cross slope at station 22+75 if the editor doesn't even display that section?
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
AutoCAD Civil 3D :: Section / Section View Of A 3dpolyline Along The 3d Polyline
Oct 12, 2012I am working in Civil3d and have a 3d polyline that i want to generate a 2d section line of i.e the path of the section plane is along the 3d line
View 1 Replies View Related