AutoCAD Civil 3D :: Removing Vertices In 2D Polylines?
Apr 9, 2013
The Straighten method seems to always default to the first vertex of the polylne, which is great if you want to start there but what if you wanted to delete the 10th to 15th vertex? Is this even possible using PEDIT Tools (it is very possible using the WEEDFEATURES method)
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 8 Replies
ADVERTISEMENT
Nov 7, 2012
I have a drawing with 3D polylines that will be used to build a surface but many of them cross each other.
I would like to extract the vertices of these polylines and use this information to build the surface but can't figure out an easy way to do this.
I have tried the Points at Vertices Automatic which is ok but as there are 300 or so 3D polylines this will get very tedious very quickly - is there a better/quicker way to do this?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 9 Replies
View Related
Mar 12, 2013
I am manually editing my section geometry by moving the grips and am wanting to remove some of the additional vertices that I don't need in a certain area. How to delete extra points? I can't seem to find a way to do this either graphically or in the Section Editor. I am using C3D 2010.
View 4 Replies
View Related
Oct 14, 2012
I'm in search of a good lisp that will ss get all 3d polylines & break at the vertices.
View 4 Replies
View Related
Oct 30, 2012
I have two polylines. Segments of one polyline are directly on top of segments of the other polyline. When I grab one of the polylines to stretch the vertices, it grabs the vertices of the polyline underneath.
View 1 Replies
View Related
Oct 3, 2013
Schematics Auto Cad-Schematic1.dwgSchematics Auto Cad-Schematic1.dwg
Schematic File.jpg
We are moving our schematic work from Visio to acad to keep everything in one program, and are trying to figure out how we can make the wire polyline in the attached file so it just to snaps to the connection points without actually extend the line or adding a vertices. I basically just want to re create what we already do in Visio where you can basically create an arrow, add text to the middle and then have it snap to a connection point.
View 2 Replies
View Related
Nov 12, 2011
Would this be a problem when exporting, sculpting, final rendering etc. Or would i have to rebuild the edges?
View 2 Replies
View Related
Feb 28, 2012
I am trying to figure out how to had multiple vertices to a feature line. I'm thinking its right in front of me, but I'm just not seeing it. I have been adding vertices by "insert elevation point" manually and it is a really nice feature in that it picks up the elevation that is already attributed to the feature line, but it would be nice to speed up the process.
View 2 Replies
View Related
Jul 29, 2011
how do I turn off the new "stretch" vertices?
I am finding that I click to select a line, and start typing commands, only to find out they aren't registering b/c I have selected that un-needed extra vertex in the middle of every pline segment.
I have checked the Options, and cannot find how to turn those off. They were not in 2008.
Civil 3D 2011
View 8 Replies
View Related
Nov 5, 2013
I would like to get original vertices(vertex) from breakline.
With SurfaceBreakline.Vertices property I can get a ObjectId collection of them but generally will contain more vertex that original vertex because it depend of "weeding factor" values and "suplementing factor" values.
How can I get only original vertex from breakline?Perhaps, API should have other property to get only original vertex from breakline.
View 3 Replies
View Related
Aug 15, 2013
In the command GRADING>EDIT FEATURE LINE GRADING>INSERT ELEVATION POINT
I can specify the Increment value which is what I want but this only allows me to select one line. How can I select multiple lines and specify an increment value?
View 4 Replies
View Related
Jan 2, 2014
As the above mentioned, I have a drawing drawn using polylines with width from someone. The width of the line are suppose to represent area,
To put things into prospective, here is an example:
The polyline is 10 unit long and with a width of 2 unit wide. If i explode that polyline, it will become a single polyline without width. The line are suppose to represent 10 unit long and 2 unit wide; representing an area.
My question is is there a way to change the line above directly from polyline with width to a close polyline (4 x polylines) of 10 unit long and 2 unit wide.
View 2 Replies
View Related
Oct 9, 2013
How to draw 3D polylines, or convert single lines to polylines?
this.JPG
View 7 Replies
View Related
Jun 17, 2013
As far as I know there is no way to add or remove vertices on contour label lines. Is this correct?
If so it's another one for my wish list.
Neil Wilson (a.k.a. neilw)
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
[URL]....
View 4 Replies
View Related
Apr 26, 2012
Is there a way to display vertices and elevation points of featurelines so I can see where to apply labels to individual segments? Without the markers it is a trial and error process of placing labels, then picking the line to activate the grips to see if I missed any segments.
I know I could create a label style that labels all the vertices but that just adds clutter. I'd really like to see some sort of marker if possible.
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
View 1 Replies
View Related
May 9, 2012
I know there are different ways to do this. Would like to know multiple options so I can see which might be quickest for me.
I have points with elevations and 2D plines at elevation zero drawn between them.
I would like 3D plines instead. This is the easiest way for me to transfer them to another drawing where I will make surfaces with them. I don't want to have to transfer the points over.
I can redraw the plines as 3D plines but this is time consuming and seems unecessary.
I don't want to have to convert them to Feature Lines either. I prefer they be 3D polylines.
Is there a simple command for this? I already have a surface containing the points and lines as surface breaklines.
Is there a project objects to surface command that will make these 2D plines at elev 0 into 3D plines while assigning elevations (and vertices) only at the current vertices?
What about a simple series of commands to convert the 2D plines to 3D plines, then force the 3D pline to take on the elevations of the points at its vertices? (I think this would be my preference, but don't know any of these commands or where to find them.)
View 9 Replies
View Related
Mar 12, 2013
We just upgraded to 2013, and one computer is having a weird issue. There is nothing in the drawing. He draws two polylines. When he goes to fillet them, it says they are non-coplanar. The properties palette says both polylines are elevation 0. why this is happening and how I can fix it?
View 4 Replies
View Related
Apr 2, 2013
Windows 7, 64 bit, Civil 3D 2010
I'm trying to create a surface using feature lines. I have an alignment and profile that I have created a dynamic feature line. However, on a horizontal curve, it apparently creates a vertex at the start and beginning of the curve, and nothing on the curve, so it triangulates between those two points and that's it.
Do I need to play with spiral tessellation (0.25), mid-ordinate distance (0.1) to get some points along the curve?
View 3 Replies
View Related
Jan 9, 2013
I need to create points with surface elevations along sample lines. The points need to represent the verticies one would see in the section editor. I've attached an image of my section editor for one of my sample lines. I need to create points that represent these 24 verticies along this sample line and do so for the rest of my sample lines as well. Is there an automated process to create these points?
View 1 Replies
View Related
Oct 4, 2013
i want to make a multicolored polyline with all the function, i try to use MLSTYLE command but it dont work so much because i can not draw a curve or i can not add vertex after the draw
View 9 Replies
View Related
Jun 10, 2013
How do you suppress viewing drawing polylines in the cross section editor in 2014. I never had this problem in 2013, now it shows all of my polylines in the cross section editor. I thought it would be under 'display objects'.
View 4 Replies
View Related
Sep 20, 2013
I use slope symbols instead of contours to keep my maps less busy. Unfortunately I can only change my cut style and fill style to slope symbols with grading by right clicking on the little diamond in the grading and selecting grading properties.
I have created a surface with 3d poly lines not by creating grading and got contours that way, How can I create the slope symbols in a surface. I tried xploding them and then creating a block and using the measure tool on the 3d polylines but it doesn't do anything.
Picture 01 is the contours
Picture 1 is the contours turned off and cut/fill styles turned to slope symbols.
View 6 Replies
View Related
Jun 5, 2012
how do I convert a section that I created using an alignment and surface into a polyline. I want to be able to manipulate and easily use the section for another program.
View 1 Replies
View Related
Jul 28, 2011
trying to create a model from existing polylines (at elevation). I have created a surface, went to definiltion, drawing objects, but there is no "polyline" option there. I must be missing something. How can I create a c3d model from existing polylines?
View 9 Replies
View Related
May 10, 2012
I have some polylines that mark the edge of roadway and around the curves there are arcs in the linework. How do I turn the polyline with arcs in it into a polyline with vertices, say, every .5' or so along the curve and turn the curve into a polyline? I tried the pedit and using decurve but it doesn't work well.
Using C3D 2012
View 9 Replies
View Related
Mar 6, 2013
Has imported 5,000 3d polylines to features? ...And then imported them into a surface as breaklines? My computer keeps crashing. I also need to import a few thousand points from blocks into the surface.
View 6 Replies
View Related
Apr 25, 2013
I'm using AutoCAD Civil 3D to model inner city utility construction projects. For my research project, I need to include water and storm pipes, but also various sorts of cables. Currently, I'm manually creating cables profiles using plines from existing 2D drawings and the sweep function.. a very cumbersome taks.
I was wondering whether there is a way to speed this process up. At the moment, I draw a circle, copy it myriads of times, and sweep each along the dozens of plines (one by one). I cannot select multiple lines and sweep them all, can I?
whether I can select mutiple plines to sweep all at once?
View 9 Replies
View Related
Oct 1, 2012
Is there anyway to read the featId attribute of a polyline and assign the elevation to the polyline? All the polylines are at elevation 0. Is there a lisp routine to do this?
PS: I do not have the shp file from GIS only the AutoCAD drawing with the polylines already created and their featId.
View 2 Replies
View Related
Mar 9, 2012
Having trouble with splined polylines in 2011? I tried to edit a splined PLine and the program was unresponsive for about 10 minutes. After I edited the spline the drawing size doubled. I reverted to a backup and erased the spline. I drew a Pline and used Fit Curve with no problem.
I draw another PLine and didn't like the results. So I tried to spline it and now Civil is unresponsive for the past 5 minutes. I'm doing this on a different computer. So it isn't that particular machine or installation.
View 4 Replies
View Related
Oct 30, 2012
They send me a file that has polylines as contours and when I try to do the surface adding contours an error appears saying that the breaklines couldn't be added because they crossed a breakline, I don't understand why.
View 9 Replies
View Related
Aug 23, 2013
I received some dwg files to show existing utilities from a local municipality. I thought the files would come as shp files, but they are dwg files. The drawings/dwg files show the layout of pipes, but the pipes are polylines. The polylines have data attached to them. The properties show material, size, length, slope, etc. I am trying to label the pipes/polylines and I can't figure out how to get the information from the polylines.
View 4 Replies
View Related
