i want to make a multicolored polyline with all the function, i try to use MLSTYLE command but it dont work so much because i can not draw a curve or i can not add vertex after the draw
View 9 RepliesI was watching one of the tutorials by Scott Georgeson on lynda.com on Corel X6. It was on the polygon tool where he was making a polygon and adding different colored duplicate layers on top to make it multicolored. He said to hold the plus+ key and then grab handle to shrink one of the layers down to show some of the underlying layer. When I try this the layers aren't isolated and the whole thing moves. I saw a check box in the settings to edit layers separately but didn't work.
View 1 Replies View RelatedI`m relativly new to AutoCAD. Any ommand or option to make the polylines between two points in a curve smooth. I added a picture for reference. The red line is the problem, this will cut alot of my work time.
View 5 Replies View RelatedI Wonder if it's possible, with a setting or something like this, to make the join command work only on lines or polylines that had the same linetype?
View 3 Replies View RelatedAs the above mentioned, I have a drawing drawn using polylines with width from someone. The width of the line are suppose to represent area,
To put things into prospective, here is an example:
The polyline is 10 unit long and with a width of 2 unit wide. If i explode that polyline, it will become a single polyline without width. The line are suppose to represent 10 unit long and 2 unit wide; representing an area.
My question is is there a way to change the line above directly from polyline with width to a close polyline (4 x polylines) of 10 unit long and 2 unit wide.
How to draw 3D polylines, or convert single lines to polylines?
this.JPG
We just upgraded to 2013, and one computer is having a weird issue. There is nothing in the drawing. He draws two polylines. When he goes to fillet them, it says they are non-coplanar. The properties palette says both polylines are elevation 0. why this is happening and how I can fix it?
View 4 Replies View RelatedIlly CS5, Windows 7 x64...When it happens, the multicolored stripes randomize if you hover your cursor over, or drag one of the sliders around.
View 2 Replies View RelatedThe Straighten method seems to always default to the first vertex of the polylne, which is great if you want to start there but what if you wanted to delete the 10th to 15th vertex? Is this even possible using PEDIT Tools (it is very possible using the WEEDFEATURES method)
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
How do you suppress viewing drawing polylines in the cross section editor in 2014. I never had this problem in 2013, now it shows all of my polylines in the cross section editor. I thought it would be under 'display objects'.
View 4 Replies View RelatedI use slope symbols instead of contours to keep my maps less busy. Unfortunately I can only change my cut style and fill style to slope symbols with grading by right clicking on the little diamond in the grading and selecting grading properties.
I have created a surface with 3d poly lines not by creating grading and got contours that way, How can I create the slope symbols in a surface. I tried xploding them and then creating a block and using the measure tool on the 3d polylines but it doesn't do anything.
Picture 01 is the contours
Picture 1 is the contours turned off and cut/fill styles turned to slope symbols.
how do I convert a section that I created using an alignment and surface into a polyline. I want to be able to manipulate and easily use the section for another program.
View 1 Replies View Relatedtrying to create a model from existing polylines (at elevation). I have created a surface, went to definiltion, drawing objects, but there is no "polyline" option there. I must be missing something. How can I create a c3d model from existing polylines?
View 9 Replies View RelatedI have some polylines that mark the edge of roadway and around the curves there are arcs in the linework. How do I turn the polyline with arcs in it into a polyline with vertices, say, every .5' or so along the curve and turn the curve into a polyline? I tried the pedit and using decurve but it doesn't work well.
Using C3D 2012
Has imported 5,000 3d polylines to features? ...And then imported them into a surface as breaklines? My computer keeps crashing. I also need to import a few thousand points from blocks into the surface.
View 6 Replies View RelatedI'm using AutoCAD Civil 3D to model inner city utility construction projects. For my research project, I need to include water and storm pipes, but also various sorts of cables. Currently, I'm manually creating cables profiles using plines from existing 2D drawings and the sweep function.. a very cumbersome taks.
I was wondering whether there is a way to speed this process up. At the moment, I draw a circle, copy it myriads of times, and sweep each along the dozens of plines (one by one). I cannot select multiple lines and sweep them all, can I?
whether I can select mutiple plines to sweep all at once?
Is there anyway to read the featId attribute of a polyline and assign the elevation to the polyline? All the polylines are at elevation 0. Is there a lisp routine to do this?
PS: I do not have the shp file from GIS only the AutoCAD drawing with the polylines already created and their featId.
Having trouble with splined polylines in 2011? I tried to edit a splined PLine and the program was unresponsive for about 10 minutes. After I edited the spline the drawing size doubled. I reverted to a backup and erased the spline. I drew a Pline and used Fit Curve with no problem.
I draw another PLine and didn't like the results. So I tried to spline it and now Civil is unresponsive for the past 5 minutes. I'm doing this on a different computer. So it isn't that particular machine or installation.
They send me a file that has polylines as contours and when I try to do the surface adding contours an error appears saying that the breaklines couldn't be added because they crossed a breakline, I don't understand why.
View 9 Replies View RelatedI received some dwg files to show existing utilities from a local municipality. I thought the files would come as shp files, but they are dwg files. The drawings/dwg files show the layout of pipes, but the pipes are polylines. The polylines have data attached to them. The properties show material, size, length, slope, etc. I am trying to label the pipes/polylines and I can't figure out how to get the information from the polylines.
View 4 Replies View RelatedI have a bunch of polylines I want to display the areas for. I am using mtext and fields. However the fields format part always defaults to a less than desirable format. Is there a way to set the formatting how I want it for the entire file? Or is there a better way of labeling than fields?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
Is there a way of converting 3d polylines to polylines with an elevation?
I have a dwg of contour information, the contours are 3d polylines, because they are contours the z value is constant all along the line, so there no question what the elevation of the polyline would need to be.
I need to do this as I then need to import the dwg into a GIS programme called MapInfo whch doesn't read 3d polylines.
I have access to AutoCAD 2004 or 2005LT.
I have a drawing with 3D polylines that will be used to build a surface but many of them cross each other.
I would like to extract the vertices of these polylines and use this information to build the surface but can't figure out an easy way to do this.
I have tried the Points at Vertices Automatic which is ok but as there are 300 or so 3D polylines this will get very tedious very quickly - is there a better/quicker way to do this?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I have a drawing that started as a pipeline network and am trying to easily convert the pipes to polylines or something of the sort to export to shapefiles.
View 4 Replies View RelatedOn several occasions I have had to convert a group of lines to polylines but had to select and convert each line one after the other. Instead of one after another is there a way or a command to select all the lines and convert them as group into polylines?
View 7 Replies View RelatedI have many segmented polylines that I need to turn into arcs. See the attached image for the method I use to create an arc from a single polyline. I need to do this to thousands of polylines. Does some other method that can do many polylines at once?
View 5 Replies View RelatedI am creating a surface from polylines and the surface is not being created per the what the polylines represent. These are simple 5:1, 3:1, and 3.5:1 slopes. The surface wants to create curves instead of straigtlines (see attached).
View 4 Replies View Relatedis there a way to get a group of 3d polylines to elevation zero all at the same time. a 300 foot long 3dpoly i have might have a couple hundred grips on it.
View 5 Replies View RelatedI have several featurelines that I wish to explode to be 3D Polylines (bad, I know, but it's a test for a way to get data across from our design group to our survey group).
Last week, in this drawing, I exploded a large selection of featurelines and they all became 3D polylines, preserving their elevation data. This week, I drew an additional set of featurelines in the same drawing. When I explode them once, they lose all elevation data, becoming lpolylines at z=0. Additionally, the Prospector shows me several errors: "breaklines not added to surface" or something similar. Which is an odd result for the explode command.
Why did this work once but not a second time?
Win 7E 64-bit, Intel i7, 12 GB C3D 2012
I want to create a road map using the survey data. Iv'e got some examples attached below.
How to create such type of drawings in autocad civil 3d.
I am trying to export polylines as a shape file. When I use the mapexport command, it asks me to save the file but the dialog box does not open after I name and save the shape file. How do i get this dialog box to open so I can use the map export command? I have Civil 3D 2014.
View 1 Replies View Related