I have a linked table (linked to an Excel spreadsheet) in my drawing. I would like to set the transparency of the lines in the table in ACA to about 80% - BUT I want the text in the table to stay at 0% transparent. Is there a way to do this? I get the whole table, text and all, at 80% when I try.
View 1 RepliesI am trying to plot a drawing with 80% transparency on the xref layers, and use a pen table to assign line thinkness (printing in black and white). But, when I go to print, AutoCAD completely ignores both of these and prints the drawing all lines at the same intensity and thickness.
View 2 Replies View RelatedI have created an easement after I selected the line callouts and created my parcel table I realized I missed selecting one of my line labels and it is missing from my table. I know I can just erase the table and then reselect all line callouts to create a NEW table, but I was wondering if there was a way to just select the line callout I missed and have it added to the parcel table without recreating a new one.
View 3 Replies View RelatedI don’t know if there is some way to draw, or somehow to say to AutoCad that it let me to input measurements from line but not from main base pint.
For example in Revit I can make angular dimension between lines and then apply any angle that I want, maybe AutoCad has such tool?
I am insert a sheet list table - Two Columns "Dwg #" and "Sheet Title" under the first category (building 1) each column works fine) then under category 2 (building 2) it gets the file name under the dwg #.
View 2 Replies View RelatedIn ACA2008 there seems to be a maximum of 10 Cell Styles allowed in a Table Style? When I try to make a new 11th style, one of the existing 10 styles gets supplanted by the new style.
View 3 Replies View RelatedFrom Project Navigator, I R-click the Project in the SHEET tab. This is not "lit up" to choose.
I am in my cover sheet, paper space, with 51 sheets in the set.
I tried to use the Sheet Set Manager, but I have the same problem.
So, I'm familiar with creating Property Set data and schedule styles and all, but I am having trouble wrapping my brain around the following, I would love to know how you tackled it in the simplest way possible:
I need to show a schedule for Windows and Doors, that will read the drawing or selection, and list all the door and window types. Now, that is not so bad, but there is a caveat that I can't get past.
We offer two or more Manufacturers for said windows and doors and are being asked to show tags on our floor plans that reference a table that says:
"For window type "1", ship either Manufacturer A - Part No. X, or Manufacturer B - Part No. Y
What I can't wrap my brain around right now is how to get Property Set data to know that "1" means both of those parts, and not one or the other. The way this is supposed to work, is for each of our plans we are to have only the types ("1", "2", etc.) that are currently shown on that plan, and if one of those windows or doors change to a different type, have the schedule update automatically.
I would prefer not to need to write a LISP or Vlisp that does this, but am open to using VBscript in the Property Set Data, I am just unsure of how to write that into a Formula.
In ACA2008, can the display of each of the four edges of a cell in a table be controlled individually? I want left and right edges of cells to display, and top and bottom edges to not display. In the Cell Border Properties dialog box, I can set the Lineweight, Linetype, and Color of each edge, but I don't see how to set the visibility of each edge.
View 4 Replies View RelatedWhat is the best way to setup Plot Co-Ordinates that have a tag that updates as you move the co-ordinate point and also I would like to schedule these points in a table ..
for e.g. :
Plot A
_______________________
E 123456.789 N 123456.789
I am setting up a table to automatically calculate plumbing fixtures based on occupancy count.
The problem I have is creating a formula for plumbing fixtures for B occupancy where toilets are required at 1 per 25 for the first 50 occupants and thereafter 1 per 50 occupants. (International Building Code)
A simple formula for 1 at 25 would be "value/25" whereby the value would be a cell content (occupancy number).
Taking this further with a formula like "(value-50)/50+(value/25)" works fine as long as the value (occupancy) is greater than 50.
If the value is less than 50 the first part of the formula (value-50)/50 creates a negative result.
Is there a way to convert a negative result of the first part of the formula to a 0 (zero)
I know this is possible in Excel with the "max" function
Having problem with the monochrome .ctb plot style table not showing up in the plot dialogue for AutoCAD Architecture 2010? Typically it seems to be standard upon install of the software.
View 6 Replies View RelatedIm trying to change the table style formatting and nothing seems to stick. I want to turn the border off in the title cell and only use a thick underline.
I change the schedule cell, save changes to the style and Ive tried saving as a new style but when I reinsert the cell format is gone. Back to the out of the box state.
Also, when I save the OTB style to my new A3 Sheet Keynote style the new style doesnt match what was saved.
Some view-port with excel table external reference does not appear when I print
View 1 Replies View RelatedIf you set a line to 0mm will it plot?
View 9 Replies View RelatedI struggled for a while this morning with trying to data link to a large door schedule in Excel. After several failures, I searched online for answers, and read in another forum that AutoCAD won't data link to more than 2000 cells.
My door schedule is about 2050 cells now, and will be about 4000 when done. I defined a set of about 1,000 cells in the Excel spreadsheet, and AutoCAD linked to it no problem. So, I tend to believe the poster who stated the 2000 cell limit, but I can't find this.
I am trying to create a line table. Here are the steps I am following :
First I label the lines I have drawn using a line label type for example Bearing over Distance, then I am going to the Annotate tab, Add Tables, Add Line and Curve and once I get to that dialog box I select my table style that I have already created and the label style I chose to label the line and click on the "apply" box and then "ok" and I see the labels such as L1, L2, etc. and all looks good, except now when I go to use that label style Bearing over distance to label another line, it labels the line with the tags and not the bearing and distance, its like the style is now defaulted to labeling tags and not bearing and distance anymore.
How can I change this :
Unselected - Selected
Can I make this line a bit thinner ?
It's a kind of highlight but makes the table unreadable.
Is there anyway to reduce the extra space in the table rows. We finally ran into a situation on a job where the tables have to be smaller. So we ended up exploding the line & curve tables and manually adjusting the spacing.... Exporting the table data to excell would be useful, but cant find a way to do that. Reporting the line calls to html and copy clip to excell would work, but cant seem to do that either.
View 3 Replies View RelatedIs it possible to copy a line in Plot Style Table, in my case red nr 1, and have two with different linetype?
I have a drawing where this specific line and the text belonging to it should be in red, (line 1) and the lines dashed. If I in my Plot Style Table make line 1 dashed, the text get dashed too.
At the moment I have put another color to the dashed lines, but if there is a way to have two red nr1 lines with different linetype .
I've created a Line & Curve table to display my metes & bounds. One of the curves is displaying an incorrect length, off by .01. It was caught as my project was reviewed by the city engineer. I went back to the database (Prospector --> Sites --> Parcels) and my mapcheck does conflict by .01.
Why is the mapcheck different from the Line / Curve table? How can I 'fix' the table to match the mapcheck data?
I have created a couple of dynamic blocks for profiled window surrounds for both a square top window and arched window. I have accomplished the square top window, but creating the arch top has proven quite difficult.
What I need is roughly the same setup as the square top, using the XY parameter set and entering the width and height so the window stretches accordingly, however on the arch top, I am needing to add a parameter to enter the "chord" dimension. I basically need another user imput parameter to facilitate the peak of the inside radius (currently shown at 4'0-5/8") in the attached drawing bordered by "DYNAMIC BLOCKS." I am not sure on which parameter to add to stretch the arch at the designated "arrow." and even once that is figured, how to make the arches that are stacked above it to stretch properly. I added Horizontal Dim constraints which seemed to work, however upon further review once stretched, the outer arch doesnt stretch properly (Review Example 1). It is supposed to be like "2" and "3". Basically as you offset the inside pline out 6" the intersection is supposed to adjust and not stay stationary.
Also on a side note, I added vertical constraints and Dim Vertical Constraints to the "legs" of the window profile because as the inside arch was stretched the legs would not produce logical results.
WINDOW EXAMPLE.dwg
I am repeatedly running into the same problem of a data linked table losing its formatting upon closing and opening the file.
Each time this happens, I am forced to enter the properties tab and return the height of the text and the height of the cell to the size that it had originally been. Is there an option that I have not seen? What is continuously causing this error?
how do i delete a hole(line in the table) without resorting the hole table?
View 4 Replies View Related I'm designing a road, but I have a trouble how to export coordinates table of sample lines?
I need a table of coordinates X,Y of sample lines.
how can i draw a line/arc inside a cell in ACADTable.
View 2 Replies View RelatedIs it possible to change the row height in a Line and Curve Table.
Civil 3D 2012
The vertical spacing in curve and line tables (the space between the text and the horizontal line) is too big. This makes the table too long and hard to fit on maps. For regualr tables, you can modify this. However, for curve and line tables this is not available. Is there a .NET file that creates/formats the tables that I could modify to reduce the spacing??
C3D 2012, but the same is true for 2014.
I need elevation data from a surface. I need an elevation every 15' along an alignment or feature line. I would like the information as a table. I am not sure how to do this.
View 5 Replies View RelatedOk, so i have a plot table set up asigning different line weights to different colours. I have layers set up pointing to the specific colours.
Eg Layer Exterior Walls - Colour White Colour White -> lineweight .25mm
There are some lines on this layer (and on others) which appear different to the rest when plotted, as though they aren't following the line weight rule.
Link to PDF [URL]....(Only the exterior walls layer is selected but this error is on multiple layers)
we just upgraded to acad 13 at the office and now when i pick single line text to edit it the transperancy of the shading is so dark i cannot see the text line to place my cursor where i need it to be to change say.. one letter or whatever.
View 4 Replies View Related