AutoCAD Architecture :: Converting Drawing To PDF File
Nov 11, 2011
If I use the CAD 'Plot Stamp' while converting a drawing to a PDF file (DWG to PDF), everything works as it should.
If I try to print it out on paper, it doesn’t work at all, even though it looks ok in the preview (however, if while in the preview, I try to zoom in on the Plot Stamp to see what's actually written, it disappears). Instead of being 'BR vertical' it's 'BR horizontal', It prints mostly out of the printable area and the text is a smaller size than specified.
What's the best way to get a high quality PDF from a DWG?We find the quality from the 'DWG to PDF' printer to be a bit disappointing. If we 'Publish to PDF' from a 'Sheet Set', it's a bit better...
View 3 Replies
ADVERTISEMENT
Mar 14, 2013
I have a autocad drawing that was clearly made from a 3D model. I cannot get the 3D file sent me. I was wonder how can I convert this drawing to a 3D file. Is anyway I can take the isometric view in the corner of the autocad drawing that i currently have and convert it to a 3D model.
View 2 Replies
View Related
Aug 2, 2011
We have a client that wants to recieve AutoCAD documents for the construction documents that our office has prepared. In the past, on other projects with this client, they have altered our AutoCAD drawing files and reissued them out to bid. This is becoming a legal matter, but I am asking, is there a way that the AutoCAD drawing file can be saved that will 'lock' the file so that it can not be altered?
View 3 Replies
View Related
Mar 27, 2013
Our staff can not get this file open. It says "Drawing file is not valid". It was emailed to them. He tried sending over as a 2000 drawing then tried it as 2007. We have AutoCad 2010 and 13 available to us, but no luck.
"Attached is a 2007 version of the same dwg. We have an Autodesk dwg viewer that we use here when we are sent a dwg and so far I have been able to open every file I have sent you with our viewer, so I am not sure why it is not working on your end. What I did though was opened the drawing in our autodesk viewer and then saved it from that."
View 2 Replies
View Related
Jan 3, 2012
I have a whole folder of drawings that if I try to access I get "Drawing file is not valid".
I have read a bunch of posts and have tried the following:
1. I have tried to insert the drawing into a new blank drawing but nothing happens
2. I have searched all of our drives for BAK and SV$ files and have found none
3. This past summer our team did a clean-up of the drives and deleted all of the BAK files
4. I have tried to copy, send, or print the file and get the same error message
This file contains the base plans for a building we have that is XREFed into our furniture, electrical, security, etc. plans.
View 1 Replies
View Related
Jun 4, 2013
Is it possible to convert a pdf file created in Autocad back to it's original dwg format in Autocad?
View 2 Replies
View Related
Feb 4, 2011
How do I create Multiple Levels in a single Drawing File
View 4 Replies
View Related
Jul 27, 2012
I have this file that won't open in AutoCAD Architecture 2012, well let me rephrase that, it won't finish opening. It has 4 or 5 xref's attached. I was able to open this same file using 2010. Through process of elimination I was able to determine that a file that was exported from Revit MEP 2012 was the problem. When that file was detached the drawing would open just fine. To make things more interesting, I am able to open the Revit Export file just fine using 2012. What diabolical combination of event has happened to cause this SNAFU.
View 2 Replies
View Related
Oct 26, 2010
I have a few problems with my autoCAD 2010 version on my new computer.When I make a few hatches, there is a possibility that my entire computer freezes and the only way out is a hard shut down of my computer.
The same problem also appeared when I tried to open a drawing direct in autoCAD or when I search the file to make an exref into the drawing.
View 7 Replies
View Related
Nov 13, 2013
Isn't there a way of taking an existing hatch patter off a drawing file and load it into your hatch library?
View 2 Replies
View Related
Nov 9, 2011
While in the drawing I want to convert I started with CONVERTCTB, the dilague box appears and I selected my current CTB plotstyle (the one I use to do my regular plots with) and upon accepting it another dialogue box appears asking me to name the new STB plotstyle. I did so and a message came up informing me the conversion was successful.
I then typed CONVERTPSTYLES and a message comes up followed by the dialogue box where I am to select an STB file. Here I selected the file I created in the CTB conversion in the previous step.
The conversion seemed to work correctly but when I go into the layer properties manager the plotstyles all have the same named style ie style 1, when I select one of these plotstyles to change it all except 3 styles are noted as missing.
I read that when I complete the conversion I should have plotstyles with old_pen_01 etc.
I have attached a snap shot of the resulting layer manager. The active plotstyle is the one that was converted during the CTB process ie the first step above
View 9 Replies
View Related
Oct 20, 2011
I have a number of drawings of our facilities that have been added to and revised over the years prior to having an established standard. Most of the drawings are in 2d (lines, hatches, etc.) but portions of the the newer projects were done partially in ADT/ACA (walls, doors, windows, etc.). I need to strip out the 3D information and convert to 2D for an application we will be using. Is there an easy way to do this?
I have done the Save As, Export to, and AECOBJECTEXPLODE routes but all leave 3d faces that can't be exploded any furher. I don't wan't want to use hidden line projection as that creates a very large drawing as all hatches are converted to individual lines.
View 5 Replies
View Related
Oct 19, 2012
I am in the process of converting our drawings from 2D to 3D . I need to change or make a diffuser from our standards to 3D
what would be the command or procedure.
View 0 Replies
View Related
May 28, 2008
I have had a drawing sent to me that is drawn to be 1 unit = 1 meter
Can i change the drawing to be in millimeters?
Im sure I have read somewhere about scaling it but being a newbie im not sure how to do this and cant find where id read it on the web.
View 9 Replies
View Related
Apr 28, 2012
I have a company logo that is a jpeg, I can insert it in a title block but when i print the drawing in black and white it is a blur due to the dark colors in the logo. Is there a way to convert it to a drawing so I can adjust colors/size to plot properly?
View 3 Replies
View Related
Feb 15, 2012
I am having an issue with a 3D drawing (xref) with size very large and crashing due to lack of memory. I want to compress it into a 2D layout. How do I compress a 3D drawing into a 2D drawing or something much smaller than the 47 MB it is now?
View 3 Replies
View Related
Aug 19, 2011
where the drawing files from inventor that i save or export into dwg, dont have accurate dimensions, they are off.
View 5 Replies
View Related
Jan 27, 2012
I created a drawing for a label in AutoCAD. The labels are made on an etching machine that we have and apparently the machine only accepts files in the BMP format. When I convert my drawing to a bitmap (export command), the images that I have in the label drawing (logos etc..) show up in the bitmap with borders around the images. I had set "imageframe" to 1 so I could select them when exporting the drawing. Another on of the images only has the border come in but nothing inside of the border?
View 1 Replies
View Related
Sep 16, 2011
After converting all my mtext in a drawing to Arial it has dramatically slowed down the drawing text dynamics, if i move any text on the drawing the lag is unreal, if i copy any text it takes 10 seconds to appear
View 4 Replies
View Related
Jan 23, 2011
Im currently using Autocad Architecture, is it true that Autocad Architecture creates a bigger file size compared to Revit Architecture? Lets say that same structure and components are created.
View 3 Replies
View Related
Sep 15, 2011
We are attempting to move from using ctb plot files to stb plot files but we are stumbling out of the gate. How to convert an existing drawing over?
View 1 Replies
View Related
Mar 19, 2013
is there a simple way of converting a drawing from a complex draiwng including blocks/dynamic blocks so that it becomes effectively a dumb drawing of lines arcs and text.
the only solution i have is to convert the drawing to a pdf then convert it back to a dwg using a pdf to dwg converter.
the reason being i dont want my client to work out how i construct my drawings.
View 9 Replies
View Related
Nov 30, 2012
I am trying to convert my AutoCAD inventor 2013 file to a standard 2007 file by going "Save As" "Save Copy As" and then "Autocad DWG File" but i keep getting up a message "problems encountered while saving the document" How do i repair this?
View 1 Replies
View Related
Dec 11, 2012
i have a drawing from a client that is in metric and i need to print the drawings in inches in 1:1 for my boss. i should know this but it seems to be a bigger problem than i thought.
View 9 Replies
View Related
Nov 1, 2011
Autodesk Inventor Professional 2011 will crash when we try open a 3D model (Inventor Component) as a Baseline View for a new "Drawing" file.
To replicate the error, we draw a simple Circle and extrude it so it is then a 3D Model. We then create a new "Drawing" file, click the Baseline View button at the top left, and then select the 3D Model Inventor file (the extruded circle). The program crashes and we get the following error from Autodesk Software, NOT Windows.
dumpdata.zip
dumpuserinfo.xml
Inventor11101152546.dmp
Version: 150239000 AIP
This is for our college... students need to perform this action for their exam. We have had success using the same software and OS configuration, along with the same steps listed above, on different machines on campus. Not sure what is causing the error on these machines.
View 2 Replies
View Related
May 24, 2012
Since I'm so darn clever I decided I could "save as" a 2009C3d-32bit drawing to 2011C3D-64bit. This drawing was working just peachy for a while. There are no data links. The drawing contained 2009 surface and point groups. I imported some Pipe styles created in 2011. Created 800' of profile,and my pipe network. When I was closing the drawing I got a lot of errors wanting to know if I wanted to save changes to VBA-pipes. Seemed like a good idea at the time so I said Yes. This morning I opened the drawing and it's there but the surface from 2009 no longer has it's Definition data. The point group is gone, breaklines are gone. I needed to remove one lousy bad point out of my surface. The points in the drawing now have three copies and one has the elevation in the point description and you can't fix it. The 3 labels are all tied together and if you erase one they all disappear. I am going to wing it from here and get this puppy out of the office with a little old fashioned autocad. This is my question. Should I have just started a new drawing in 2011, clipped all my old line work and text from the 2009, imported the points and rebuilt my surface? Did I do something wrong and there was some way I should have been able to make this work? I was running 2009 and 2011 on my computer but had to remove 2009 last week. It no longer like livng with his better looking brother "2011" and I had to put him out. I have numerous small projects created in 2009 so this will happen again.
View 5 Replies
View Related
Apr 1, 2012
Any way to convert all of the single line text in exisitng drawings to multiline text without having to do them individually in Civil3d.
View 2 Replies
View Related
Sep 25, 2013
A client has asked me if I can give them a .nc file so they can directly input into their cnc machines.
I know that I can save an autocad drawing, or objects in a drawing, as a .DXF file. I also know that i can purchase, or obtain an open-source version of, software that will then convert the .DXF file to a .nc file. Currently, my company does not do 3-d models. I have not dealt with this before, so, I am wondering if my drawings will need to be 3-d in order for the .nc code to be correctly read.
View 1 Replies
View Related
Mar 11, 2013
Question about taking an eps file and changing it to a dxf, I have another question. I downloaded and registered the Ghostgum software and also the pstoedit software to change the logo I have as an eps file into something I can import into CAD as a dxf. But it won't let me do it. I have searched the help menu in the ghostgum software for a solution but nothing seems to be working. A warning dialogue box comes up saying the interpreter seems to have failed and cannot proceed. I am attaching a copy of the logo I am trying to convert.
View 1 Replies
View Related
Aug 14, 2013
I have been working with an optimization software the exports DXF files to be meant for use in AutoCad. But I am working with Autodesk Revit and the only jobs you can open in Revit are RVT, RFA, RTE and ADSK files. How do I open up the DXF images in Autodesk Revit?
View 1 Replies
View Related
Mar 8, 2013
I am making a sign for a customer. They have decided they want me to include their logo which was created by someone else who saved the logo as an eps file. Is there a way to convert the file to a dxf so I can manipulate the logo within my iam?
View 2 Replies
View Related
