I am wondering if there is any way to calculate sq ft of rooms quickly. I have a floor plan that spans two blocks and has 1000 rooms. How can I get the sq ft of each room quickly? I am fimiliar with the AREA command but that involves a lot of effort to pick all the points for so many rooms. The rooms are not polylined, so I cannot just use the properties box.
View 4 RepliesI need to calculate square footage quickly. I am currently polylining everything. Here is what I need to do quicker:
Calculate square feet of each room with these requirements:
- When meeting a hallway to the outside face of the wall
- when next to an adjoining space, to the midpoint of the wall
- When against an outer wall, going to the face of the wall.
after discovering zones and the space evaluation tool I wonder whether it is possible to customise the XLS output further by also reading out information from a property set attached to the space?
The office standard is to have a property set attached to each space that defines a room number (which is the level ID plus a number, say G-01), the area and the space name.
We used to simply schedule the areas with a schedule table. That only gives us net rooms, no subtotals per department (or say per flat) and no grandtotal.So we got as far as using zones grouping the spaces in each flat.
Now I need an area schedule XLT template that also displays the room number from the space's property set and the schedule grouped in a fashion that I get subtotals per flat (=my zones) in another column and a grandtotal.Playing with the Space evaluation tool I seem to only ever get Room/ zone names and their areas.
is there a way to COPY objects from model space to paper space? CHSPACE only "cuts" geometry. I need the same geometry stacked in both model space and paper space.
View 1 Replies View RelatedIm working on a student version of Architectural CAD 2012 i drew a floor plan and used AEC Dimensions on my model space but when i switch over to work space they don't show up. I tried matching properties and switching between paper and model but so far no luck.
View 2 Replies View RelatedSomehow the two tabs which were located at the bottom of the screen in my version of Autocad 2008 have dissapeared. I used them extensively and would like to get them back. I've tried the solutions provided in previous answers without success. The menus which are supposed to appear don't.
View 4 Replies View RelatedUp until now, we have been entering room names for scheduling manually. I would like to be able to create a psd, whereby the room name is the space style name - *UNLESS* - a value has been entered in any of the manual room name properties. I am sure I can do this with a formula property but I am having trouble wrapping my head around it.
I have 3 manual property definitions in my PSD: (the names corelate to the position in the room tag)
Name_Manual_Top
Name_Manual_Mid
Name_Manual
Additionally I have one which concentates these 3 for the schedules:
Name_Manual_Sched
So I need something that says:
*if* NAME_MANUAL_TOP *or* NAME_MANUAL_MID *or* NAME_MANUAL *=nil*, *then* NAME_MANUAL *and* NAME_MANUAL_SCHEDULE = SPACETYLE *else* this is where I am having trouble - the else is that I want it to act like it always does - if there is data in one of the manual properties
I have done some lisp programming, but not any VBA (but willing to learn)
I've created a number of spaces, and I want the space name to show up in a Room schedule. Here is a picture of the Properties window with one of my spaces selected. The space name is 'Spanish 2'. see first attachment
I understand I need to add a column to my room schedule that has this value in it. Here is an image from the 'Edit Schedule Table Style' dialog and the 'add column' sub dialog.
see second attachment
which one of this rather lengthy list is the correct one? I've tried all the values that have 'name' in them but all I get is '?' in my schedule. I've attached the file I'm working on. I created the spaces by dragging and dropping from the tool palettes out of the box, and the room schedule the same way.
we have a strange problem showing up here on Autocad Architecture 2014 on Windows 8: We use the "space-bar" to confirm a command or shortcut. After start of AutoCAD everything seems fine but suddenly a hit of the space bar is interpreted as two hits:
Line <space>
Specify first point:
Specify first point:
Specify next point or [Undo]: [cursor ready for next point]
No chance to point the "first point". It is either 0,0,0 or the last coordinate.
Using the <Enter> button (or selecting an icon) is working as expected / normal but very unhandy because on the right side of the keyboard.We tried different keyboards but this is not a hardware problem!
We are using AutoCAD Architeucture 2010. We would like to be able to use exisitng room numbers for a renovation project. Currently the building has room numbers with letters in them, ie AS112, T112 or C112. Unforunately the letters change multiple times on 1 level. So we can not simply change the desigination on the construct level. how to do with with 'spaces' in AutoCAD Architecture?
View 1 Replies View RelatedI navigate (all functions, pan zoom, etc) with my space explorer in autocad architecture 2011 any autocad command will be cancelled by the 3d mouse. when use the 3d mouse, the cursor in autocad changes to the default windows cursor display. I have an updated version of autocad 2011 with all of the service packages and hotfixes, the space explorer software driver is up to date too, windows 7 ultimate x64 is updated too.command line example:
Command: _line Specify first point: "I move the 3d mouse" Specify next point or [Undo]: *Cancel*
Command: *Cancel*
I tried reinstalling both autocad and 3dconnexion, restored the default settings of the 3d mouse. I also shutdown the logitech mouse software to make sure it was not interfering with anything. I also double checked that it was not a display refresh issue with the graphics card or the display settings for autocad, I also played with the profiles in the 3dx sofware.
I installed Aucad Architecture 2012 and same freaking issue. The only way to solve it "half way" (so not a real solution) is to change the visual style to other than 2d wireframe, but when doing so, whatever object you are manipulating seems to freeze on the screen and doesn't refresh untill you move the mouse (normal one), basicaly the manipulated object doesn't zoom with the rest of the objects in the screen.
This is very anoying since the purpose of these stuff is to create an uninterrupted worflow not the complete oposite!! this mouse is worth around 200-300 dolars and Autodesk took responsability for it's drivers!! and it doesn't work!! it's faster to work with your regular mouse. Also you should develop the driver version for the Autocad Mac version.
Just started using 2012 and noticed a delay in the mouse in the drafting space only. When I hover over the icons, the speed is normal, it only occurs in paper or model space.
View 4 Replies View RelatedAs you can see, when I select the room tag (this is the room tag/w dimesions from the tags palette), it displays the correct name and other space objects values. However the tag itself is not reflecting the information - it displays the default values of STANDARD/LX W.
It appears to be properly linked to the PSD, but not updating.
I have a drawing that has room spaces & tags attached to them. I can not figure out why there is an arc leading from the room tag to the space it is attached to. When I detach the room tag from the space, it disappears, but when I re-attach it, the arc from the tag to the space appears. How do you turn it off? I copied the space style from another file to over-write this one thru style manager, no luck...
View 2 Replies View RelatedIs there an easy way to use space to generate a ceiling grid. My predicament is that when I create a space, the lines show up in Medium Detail and I have to switch to Reflected display configuration to see the grid. But when I am putting in the grid it asks me to choose the space, which is now not visible. Unless I change the display configuratiion, is there a way to pick the space while in the reflected display configuration.
Or better yet, is there a way to create a script that will toggle the space display on and off while in reflected.
We are trying to create a set of palettes for a building type that we specialize in. How do we add the spaces to a design palette and can we include a room tag with it?
View 1 Replies View RelatedI have created a block in the model tab with the annotative scale set at 1'-0" = 1'-0" with the UCS set to World. When the block is inserted in model space either on the model tab or thru viewport it displays and prints correctly. However when the same block is inserted into paperspace on a layout tab the block appears correctly but when printed either hardcopy or PDF it is rotated 90 degress around its insertion. This malfunctions the same whether it is inserted directly or nested in a legend block.
It is also not one particular block or drawing but (mal)functions across drawings and block definitions.
I really don't want to have to make two sets of blocks for the project.
is this possible? we want to have our ceilings in separate constructs in order to have two people working at the same time
View 1 Replies View RelatedI'm using ACA 2013.
While in a view I make a "New Model Space View". After I tag this MSV it seems that being able to see the border of each MSV that is in my view dwg would be a useful thing. Is there anyway to turn this boundary on?
Why doesn't generate space recognise columns?????
View 2 Replies View RelatedWe have a bit of an urgent situation at work. Namely we have stepped over from standard AutoCAD 2010 to AutoCAD Architectural suit 2012.
The situation is as such that if we set our search path to our ctb and our dwt (nothing else no other search path changes) our dwt templates load as being visibly black/white all the colour information is wrong.
Upon closer inspection of elements draw in the dwt for example a line though it still displays as being physically black/ white the properties menu declares it as being the colour we need it to be for example red. We have double-checked in our plot dialogue box if the ctb is present and its presence is confirmed. The peculiarity is though if we try and locate it using our (findfile “CTB\NAME\AND\PATH” method the command prompt returns nil meaning as far as I have come to understand as missing/ not loaded/ not found. A line the properties menu states the plot style is set to ByColor and not by the specific CTB file as when the same line is selected in AutoCAD 2010.
We have quite an extensive customisation comprising almost of every kind of file AutoCAD has put up for user customisability so my instinct was that something within the whole customisation was causing our issue.
We have since rid of all customisations and reset the profile using AutoCAD and as double backup also via the registry keys, we also have deleted our corresponding AutoCAD application folder in the hope of eliminating some nasty that may of stayed behind.
We have no plug-ins that cannot be the problem. Further experimentation shows that if we create a search path using the following lisp the colours are displayed right for the duration of the AutoCAD session but upon restarting AutoCAD the colours again become black/ and white.
When entities such as the lines are moved the items being moved flicker across the screen in their correct colour, once placed the image instantly shows as being black/ white again.
As final symptom our model space colour seems to be the only thing effected, our layout tabs are fine however we don’t work in layouts but rather in model space.
I have also as last used the vars2src command in AutoCAD 2010 and imported the variable settings into AutoCAD architectural suit 2012 hoping that the issue was a variable setting overlooked, to no avail though. Neither is our desktop icon enabled with any switches such as profiles.
I am having a problem with project based door tags getting the *ERROR GETTING VALUE*. I have checked the synchronizations and they are fine. The tags work in all our other projects, just not this one. We are also having some problems with a ? showing up for a space style in the schedule.
View 8 Replies View RelatedI'm using project navigator and I want to use the intelligent title marks created by the Mode Space View drawing that is created when I use the Detail Boundary.
I have purchased a 5 hour block of support time on this and after 4 days they have not found a result for me and are looking to developers at this point.
My issue is this. I xref in the floor plan that I want to use to make some enlarged floor plan details out of. I have a custom high detail display configuration set for this view drawing. I use the detial boundary tool that adds the detail boundary and tag and then created my model space view with an intelligent titlemark that will then reflect the number and sheet when inserted into a sheet drawing.
The problem is trying to get this MSV to reflect what I see on the floor plan. As of now it just brings in a enlarged detail of the area but it's all the same color with no hatch detail.
I can change the result of what I get by selecting the “model space view” that I created and then going to properties and changing the “display controlled by” on the display tab of the properties of that object. If I change that to “Drawing default setting” then the result is set to whatever the drawing default settings are. It looks like the “default settings” for a 2D Section/Elevation object are “General” Display Representations.
how to get my custom “Bew_High Detail” display representation to be the default Display Representation of the “2D Section/Elevation” object then I think I would get my desired results.
We have had a reoccuring problem in autocad architecture 2012 where model space views can no longer be dragged into a sheet. It just shows a circular cancel icon.
The sheets are set up fine and it may even have several MSVs already in place then out of no where the ability is lost. We have tried allt he usual fixes (checked the layers, restored the .bak file, tried on other computers, installed service packs) but it seems once the file is "poisoned" the only fix is to recreate the sheet and delete the old one. Not a terrible solution but it is not efficient.
We have a dozen computers all with acad architecture 2012 and it seems to happen on random computers and we can't pinpoint any specific differences between them.
We did not have this problem with Autocad architecture 2009.
It could be something with the project database.
I have found that since installing the service pack for 2014, xclips in paper space have become blank, or, on occasion, 1 will show, but others won't. The invert still works, strangely enough.
View 1 Replies View RelatedI can select mtext in paper space to edit it. I can create a new text object and select it but I am unable to select existing mtext objects. Audit and recover does not eliminate it. Everything is at 0 elevation. The only to select it is to write block the entire drawing out. That gets sort of inconvenient. Is there a variable that is getting set like the imageframe variables that prevents me from select the text?
View 4 Replies View Relatedi need to export/retrive the Informations from "Space-Zone manager".
i can see the informations of surfaces and the openings in "Space/Zone manager", but no way to export or to extract them. the informations are also no "property set" information, which could be managed with schedules.
When using the 'space generate' option when inserting a space, the tool automatically turns off 'object snap' and then of course it doesn't turn it back on at the end of the operation. I tend to need to switch back and forth from auto generate to polygonal insertion and having to reset object snap every time.
View 3 Replies View RelatedI have a room with a cathedral-style ceiling. I'd like to create a freeform space. What's the secret? I've changed the properties from extruded to free form, and then selected the boundaries (floor slab, ceiling slabs & walls), then hit "G" to generate the space. The command line reads no space generated.
View 2 Replies View RelatedIs there a command to split a space object?... if so, what is it?
View 2 Replies View RelatedWe experienced a problem. we have a drawing file, is about 1.6meg not big. while working in model space doing some 3D work, all of a sudden all the objects dissapear except for some text. all layers are on and thawed. we regen all, zoom all. weird thing is when we go into the paper space tabs everything shows up. so all the data is there some place but cant find it in model space.
there are no xrefs in the drawings and i had cleaned all the multiple copies out before to keep the file size down and more workable. this is happening on two machines. other drawings are fine.