When I try to use the Send to Back command (HOME - MODIFY - DRAWORDER) then I get the notification in the Command line: "Command: Unknown command "FRONT". Press F1 for help."
Is this normal? or is this a bug in version 2013
I have this heavy issue, i can't send to back a line, an object or a hatch under other lines. In 2012 i used this feature a lot but in 2013 it's not working very much, maybe 1 time out of 10 and i absolutely can't say why.
HPDRAWORDER = 1 seems to work with a new hatch.. but i can't redraw everything.
Let's say i put an entire floor plan into block then draw over it. (I don't want to start a Xref discussion please) i can't send the entire bloc to the back.I used to do that with 2012, 2008, 2007.. but it's 2013 it's not working, is there a way to correct that?
Is there any command to send to back all images in a DWG file, like it is HATCHTOBACK for hatches?
View 3 Replies View RelatedI have set mtext (with background mask on) to the foreground (using draw order: front, and draw order: above objects) but those settings do not 'stick' and often have to go back and reset all those values over again.
I've also tried using Draw Order on the objects under the text (draw order: behind) which also results inthe text randomly behind in front of or behind objects.
Is there a way to set mtext to be in the foreground permanently and not have to go back and mess with Draw Order all the time?
I am making up some furniture blocks with codes in. When I mirror those blocks the text goes back to front.
View 4 Replies View Relatedi was asked to assist with plotting some coordinated on a drawing, the catch is i need to re orientate the UCS with Y+ at the top of the screen, X+ to the right, Y- to the bottom and X- to the left..
I managed to get this part right, that was the easy part.....
However when i went to put any Dimension or even Text on the drawing it was Backwards and Upside Down.
I have added a small screenshot for reference ....
When i insert a xref in a drawing i always use the command "send to back" in the model space. However when you switch to the layout the xref sometimes is on top of the symbols in the drawing. This problem is easy to fix with send to back but when you want to do this you have to set the viewport to modelspace selct your xref and then send to back. This is easy to do when you only have a few layouts but when you have a couple of layouts with several viewports in each layout it's a very time absorbing job. Is there any variable to make sure that the xref is always send to back in the layout space.
p.s i'm using Autocad LT 2010
I regularly generate models which have a front end (body) of a known shape but differing in size, to a back end (shank) again of a known shape but differing size.
So, is it possible to take pre-drawn blanks of both front end (body) and back end (shank) to join them up to create a new model/part? I'm assuming it's combine bodies but I'm not sure how it works!!
I'm trying to print a flyer that has art on the front and back. I copied the images to Microsoft Word on page one and two. I then printed page one and then turned the page over and printed page two on the back. Though I have the same settings for page one and two, it's not aligning.
Is there another way to do this so I can get perfect alignment for the front and back of the page. Can I do this with Photoshop or should I use a table in Microsoft Word or should I use another program altogether like Adobe Pagemaker or Quarkexpress.
why I can't export the "Distance 1" attribute out of thsi drawing using the ATTOUT command. I need to build a series of constrained drawings using Dynamic blocks so I can send info from an Excel spreadsheet back and forth bewteen a drawing. I think I'll have to buy a 3rd party utility for that but for now, how to simply get the info out of ACAD and into Excel thsat would be a great start.
View 2 Replies View RelatedI'm trying to print a flyer that has art on the front and back. I copied the images from Photoshop CS to Microsoft Word on page one and two. I then printed page one and then turned the page over and printed page two on the back. Though I have the same settings for page one and two in Word, it's not aligning.
Is there another way to do this so I can get perfect alignment for the front and back of the page. Can I do this with Photoshop or should I use a table in Microsoft Word or should I use another program altogether like Adobe Pagemaker or Quarkexpress.
I am new to In Design having come from years with QuarkXpress. I need to put an 8 page owners manual together. The front & back pages have to be set up properly for the printer. How is this don in ID?
View 3 Replies View Relatedi am facing some problem with Adobe Illustrator.
Step to simulate:
1. Select an image > right hand click on that image > Arrange > I cant perform ---> Bring to front, Bring forward, Send backward or Send to back.
I am working on a skin care product. I have modeled the tube already. i want to know the best way to texture tube on both sides, front (company logo) and back(usage instructions).
View 1 Replies View RelatedAcceleration in the Contour Docker is back to front (or is it just me) ie. Object Acceleration accelerates Colour and Colour accelerates Object.
View 3 Replies View RelatedI am having trouble with the Paste in Front/Back function. I will copy my selected layers and then want to paste them in place on the selected artboard next to it and often times it pastes it back on the artboard where it copies from. Sometimes the function does what I want, but often times it pastes in a different location, either on the same artboard, or next to the artboard where I want it pasted. It also tends to slightly move the X and Y values (again, sometimes). Each time I go to paste, I am creating a new layer and selecting the artboard where I want everything pasted, but sometimes it works, and other times it doesn't. I am using CS5 on MacBook Pro.
View 8 Replies View RelatedHow can I get multiple images on 1 page to line up when printing on both sides? Dimensions are 3.5x2.5, 9 to a page. They are sportscards for son's baseball team. They are slightly off by 2-3 cm on all 4 sides and in betweeen. Extremely frustrating. I tried printing in Photoshops but text is blurry. In Lightroom, Images look absolutely perfect. If they would only line up. Using a Canon MG 6200 if that matters.
View 7 Replies View RelatedCan I invert an image that was copied back to front?
View 1 Replies View RelatedI'm working on a double sided business card and I would like to know how to set up the file in Illustrator.
View 3 Replies View Relatedhow to send graphic in vector from coreldraw x86 to photopaint x86 directly via application launcher
( change it in eg. eye candy ), then send back in bitmaps just by closing PP.
eye candy x86 issue ( i coppied this: libmmd.dll to system32 and C:Program Files (x86)Alien SkinEye Candy 7
too ( dll file is from here, not sure if its for x86 [URL]
In Elements 12 how do I auto fix multiple pictures, then send them back to the organizer?
View 4 Replies View RelatedWhen I first got Lightroom I stupidly imported ALL my photos at once from my hard drive-all 7100 of them. Now I would like to send them back to the original places on my hard drive so I can import them in small batches and work on them. How can I do this without losing any images? Can I delete all of them (not to the recycle bin) and then reimport them?
View 28 Replies View RelatedWe upgraded to AutoCAD Mechanical 2012 (from AutoCAD Mechanical 2009).
I used to go: TOOLS > DRAWING ORDER, in order to bring an object to the back or the front of another object.
Now that we are using AM 2012, I can't find where this command is located.
when I work on autocad I cant send my file to sketchbook, I click where it says >> "Sketchbook" - Create new Canvas<< and after that, is supposed to display a menu to set the paper size of the layout but nothing happens,
I use Autocad and Sketchbook designer 2013 and I don't know if it has something to do with my OS, I have Windows 8. because of that I thought that if I install Autocad 2014 the problem would be solved but it doesn´t even show the "sketchbook" option.
What do you use to send and backup your AutoCAD files? I've heard of CADCloud which looks good: URL....What other CAD - specific solutions are there around?
View 7 Replies View Relatedwhen printing in view ports, wipeouts don't show. wipeouts are transparent.
ive tried copying the same wipeout lineweights and pasting it in new documents but have no problems there. i've tried re saving under a brand new document but still no luck. apparently it's only happening in the same 2 documents.
I am building my second book with Blurb, this time with LR4
it's going to be a small square and for the back and cover, I have built a file with photoshop and when I drop it to first page, no way I can "slide" it to cover the entire back+ cover
see my problem [URL]
I'm using CS3 on a Mac.
I outlined my text and subtracted it (and the tree image) from the black background. When I did this both appear thinner - particularly the tree.
If I then take the original version and the new subtracted version, and view them both overlayed one on top of the other in wire frame (outline) mode, there is no difference in the actual lines.
It seems to be a problem with the way illustrator previews the images. This wouldn't concern me, but when I export the file as a jpeg, the lines also appear thinner in the export.
I can create a manual solution by offsetting the path before subtracting, but this isn't ideal.
I have a problem with the Send Command, when I use it the email is sent without text.
View 9 Replies View RelatedFirst one is a screengrab of the drawing I want to print
Second image is of the 'Print Preview' screen.
The printed A1 page reflects the 'Print Preview' image.Objects are 3D solids, with clipped images positioned on the front of them.It was quicker that way, rather than ripping my hair out after trying to tile in a program without any UVW modifiers.It's like the printed viewport reverts to parallel projection, while I want it to be in perspective projection instead.
i have been drawing a 3d model and when it comes to dimensioning, i can only do it for the vertical and horizontal distance from the top view. i cant find a way to dimension the thickness of my model from the side or ront view.
how do i change the settings for this..
