I tried editing the content (text) of a Geometrical Tolerance Box ? but the usaual don't work.
I tried double clic, Properties, right clic ....
Is there some command or icon that i did not see?
I have attach a drawing.
I wish to extract geometrical data from autocad 3d object (mostly poligons), like length, height and width. I can see them in the property of a single object, but when I want to extract them into a table or into an external file, I can't find them.
View 5 Replies View RelatedIn Autocad 2014 I can't seem to get the same properties when I choose a dimension as I have been with all previous vertions. It does not have any of the option such as text height, Tolerance, Precision etc. Is this new for 14?
View 7 Replies View RelatedI am currently trying to make my AutoCad more powerful as a tool of Engineer but not Draftmen (My boss never thing about it, I could only get a standard AutoCAD, not AutoCAD-EMP).
I want to make it a tool for myself to analysis the building system, with excel (and VBA)
The first tool I wanted to create is an underground drainage capacity analysis tool. But I meet the first difficulty, how can I automatically transfer the information inside CAD drawing to the excel?
Say, There is a drainage system with 2 manhole and 1 pipe,
the Manhole have 3 attribute : Name, Model, Level, (and the X-Y coordination),
I Create a Block with attribute "Name ; Model ; Level".
and then I insert the Blocks and place it in correct location inside the Layout Plan.
How can I create some script to "Scan" all Block inside the drawing and make an excel file with data like:
Block-Serial, X-Coor, Y-Coor, Rotated Angle, Name, Model, Level.
Autocad 2007.
Can we treat the exploded text (i.e. individual text alphabets) as geometrical objects?
Can we apply "OSNAP" options on these exploded text objects?
Actually, I would like to prepare the symbol of National Board NB to be used to make the "Name Plate" for pressure vessel.
I would like to add a "vertici" to the middle of the side of a rectangle solid and pull this up to form a triangle.
View 5 Replies View RelatedI'm new to AutoCAD, and especially new to AutoCAD Map 3D. I need to make a plat showing a well location. When using Petra or DrillingInfo, a map can be printed to a DXF. DrillingInfo puts out a DXF with just the 0 layer, and the well spots come in as polyline circles. The DXF Petra puts out opens with different layers and symbology, which I like. It's just that the well spots are blocks, which I do not understand. When I open the Petra map with AutoCAD Map 3D, my well spots are unitless block references, and are tiny specks. I need to resize them so they can be seen.
View 9 Replies View RelatedIs there anyway to be able to edit a PDF document while the drawing it's referenced in is open?I would have thought that a PDF underlay would have worked in the same manner as an external reference does.
We use crystal reports to create reports from the drawing, export to PDF and insert back into the drawing.Then when items are released for ordering and received the PDF is stamped as such and the underlay reflects that progress in the drawing.
But if a user has the drawing open the PDF is locked for editing.
I have some new multi leader definitions using blocks, however I can only edit the attribute definition text individually, where if I had the same block as a standalone with a leader I could select as many blocks as I wanted and change the text via quick properties in one quick step. Is there a way to achieve this using a block as a base for a multileader?
View 2 Replies View RelatedI was working in a drawing when I had a Fatal Error. When I brought Acad back up I have lost my editing capabilities for my 3D walls and blocks.
View 1 Replies View RelatedI want to edit the default arrowhead. I know how to create custom-arrows, etc. but I want the versitility of having arrow heads on many layers, not the zero layer or any other layer that the arrow block-definition is on; and I do not want to use the pointed arrow.
Where may I edit the arrow, or substitute my own; and in what format is it in?
What is the variable I need to change in order for the text I'm editing to stay at the actual orientation and size.Right now it gets bigger and changes to horizontal.
View 9 Replies View RelatedThere is a way to change the text in a tag to include spaces without getting the error that tags cannot be null. I've forgotten how to do this. I can't find this in my AutoCAD manuals, or on-line.
View 1 Replies View RelatedI have a bunch of parts drawings created in LT 98 that I am now editing in LT 14. For the most part I haven't had issues. However, I have been having a big issue with the Text function. It doesn't matter if I am trying to enter new text (Multi or Single line), or if I try to edit the existing text. Either way, the program immediately locks up & will not snap out of it.
View 2 Replies View RelatedIn previous versions, grip editing a point from one place to another maintained the point elevation regardless of how the point was moved. For instance, drag it from it's current location and snap to the end of a line. In 2013 the point elevation now changes to match the elevation of the point snapped to.
Is there a new setting to control how points react to Osnaps? Or are we now expected to use the .XY filter (without ever being notified of this change in workflow)?
I am trying to use the Faces Editing drop-down box, and in my book it lists the options as Taper Faces, Move Faces, Copy Faces, Offset Faces, Delete Faces, Rotate Faces, Color Faces.
All it shows are Taper, Extrude and Offset.
I'm operating AutoCAD 2013
I was trying to figure out how to edit an array to either remove all the array objects outside of a shape or to fill in a shape with objects.
For example, I created a rectangular array of dots and want to remove the dots such that it makes a circle (or triangle if that's possible?). There are reasons that I can't use the polar array to make the circle because I need certain parameters that really I can't replicate. Also, selecting each point is too tedious and really not efficient (though it could be done eventually, but I don't want to waste a ton of time).
Can the rectangular box around the number tag be edited or removed all together?
View 1 Replies View Relatedsent drawing out to vendor, received back drawing where they had changed the width factor to .75. is there a way to globally edit all these mtext entities?
View 2 Replies View RelatedI am wanted to change some setting for editing blocks in 2013. I want to edit the block in place by just double clicking onto it. I can go through the properties and click on "edit in place" but I would like to eliminate that step.
View 9 Replies View RelatedHow do you set the gap tolerance in Hatch command?
View 1 Replies View RelatedIs it possible to get your Gap Tolerance setting to stick. Mine keeps reverting to 10 by default!?
View 8 Replies View RelatedI was wondering if there is a way to convert many regular fractions to stacked fractions without editing each one. I have a file full of fractions that all need to be stacked. It seems it would be quicker if I could select all the fractions and stack them at once rather then edit each one individually.
View 2 Replies View RelatedIn previous versions of AutoCad I would just double click on a block do my changes click the save changes button and then a save dialogue would come up with an option to change the insert point. Did this option go away in 2013 AutoCAD? I do not get this option anymore after I finish editing a block? This is very useful. Why would this go away?
View 6 Replies View RelatedDoes Inventor 2013 have any means of tracking editing time?
View 6 Replies View RelatedEditing attributed blocks causes them to disappear from the screen. Edits include changing attribute values, moving attributes, or moving the entire block. The block is not gone, so saving and re-opening the drawing will display it again, but this is a terrible workaround when moving and editing many blocks in a large drawing.
We do not use annotative or dynamic blocks, so these are just good old-fashioned attributed blocks.This behaviour is being seen on both Windows 7 and older Windows XP systems with various hardware specs, and it is only in the 2013 product. We still have some stations running Map 2012 that do not experience this issue even when working in the same drawings.
I have a drawing I am trying to ordinate dimension and I was wondering if it was possible to place a symetric tolerance for a dimension on a second line under the actual dimension?
View 6 Replies View RelatedI'm trying to get hole tolerance by Inventor API using c++ but the value returned is not correct.
the code is:
Parameter* diam = m_Feature->GetHoleDiameter(); // m_Feature is a given HoleFeature
double tol = diam->Tolerance; // returned 1.0
BSTR str = diam->Tolerance->HoleTolerance; // returned "0".
// The correct value is 2.89
How can I get the correct tolerance value?
I've got some 2D contours that have certain vertices very close to each other in some parts of the string. Some are only 0.008 apart. The cross checking in Drawing cleanup is picking these all up as crossing strings.
anything that will possibly filter out these vertices at a set tolerance? I've tried using Snap clustered nodes but that won't work seen as though it is occurring on the same string.
While looking at the different tolerance methods, I see a couple called MIN and MAX, which just tack these words to the end of the dimension. Is there a way to customize the tolerance methods to add suffixes or prefixes to dimensions, such as TYP or 2 PLCS or something like that, so that I can minimize my detailing time.
View 5 Replies View RelatedI'm trying to edit an architectural Title Block. I've went into block editor and did attribute definitions. However, when I save it I can't insert it into a drawing. Is there anything I can do to prevent this from happening?
View 2 Replies View Related