I'm currently using Autocad 2013 for Mac and having some problems with cad.
1. I can't change my page setup in layout view its showing me strange window where i can't click and do any changes.
2. when I'm trying to scale my drw in 1:10 my page is A1 size its scales way to big so it doesn't fit the page.
I am guessing this will be a no but is there a way to change page setup for more than 1 page at a time? I have multiple pages in a drawing that I want to change to all the same page setup.
View 3 Replies View RelatedI would like to know how I can edit my Title Block at the bottom of my page. I used to be able to select it in the past when opening the new template file. However after I performed drawings in the model window and back to the layout, I cannot click or edit the field anymore. I tried highlighting using my mouse, shifting layers and exploring right click commands but nothing good came up.
Refer to the attachment what I mean. I am running AutoCAD 2013 and I am on the "AutoCAD Classic" theme.
I tried doing a search online and on the forum with keywords such as "edit title", "edit name" but nothing relevant came up.
Capture.jpg
just reistalled elements 9 on new hard drive and can't get to open dorectly into the edit page
View 2 Replies View RelatedI made 30-page PDF file in Illustrator last week.
Yesterday my co-woker eited and sent to me. But i can't open 30-pages all in once, instead of this window pops up and only 1 page of all open it. How do I open all the page and edit it once without any script?
Rotate pdf in illustrator. Opened a pdf to edit and the page is rotated 90°
View 14 Replies View RelatedI have an assembly that was created on 64 bit version of Inventor 2013, the total file size of everything is around 150MB. Even if I use 'Pack and Go' to move the file to another computer running the 32 bit version I get an error when I try to open it which says something like:
'unable to allocate 3GB memory for FBAttributeSegment'
The actually figure is over 3GB but of course on a 32 bit version of windows it is physically impossible to allocate that amount of memory (even with the /3GB in boot.ini hack)
I've performed various dynamic simulations as well as animations within the assembly so I'm thinking that perhaps its trying to allocate that huge amount of memory for a saved state of one of those.
What FBAtributeSegment might be and whether there is any special way to save an assembly to avoid this problem? The name FBAttributeSegment doesn't correspond to any part or assembly names.
I should also add that I have no problem opening it in a 32 bit version of Fusion which again suggests to me that it is something like simulation or animation that is causing this
When I plot to pdf with Transparency on it takes a long time and only creates a blank page. This happens when I give my hatch a transparency in the Properties Dialog box and plot it.
View 1 Replies View Relatedwhy when i want to import file sketchup by type "IMPORTSKP" in commadline box, i can't import file sketchup into autocad because AutoCad Error Aborting and fatal error, and after that my autocad suddenly closed by it self, so i can't use my auto cad.
View 3 Replies View RelatedI am familiar with older versions of autocad and now using autocad 2013.
i am trying to copy paste an existing drawing to a new page but the limits are different, the copy comes smaller than the template border so am trying to fit the copy into the border page.
how do i do this?
Is there a way (script file) to delete page setups from a lot of sheets all at once.
View 2 Replies View RelatedIn ACAD 2013, everytime I try to sync my settings to "the cloud", the pull down menu reads "Customization Syn - Error". I am signed in OK to Autodesk 360. Stand alone 64 bit installation on a single machine.
View 2 Replies View RelatedI could not print, save, make any changes to one particular drawing which was created ion Autocad 2013. Whenever I tried to work on the file attached error message pops up and Autocad program gets closed.
View 7 Replies View Relatedi get the following error msg "an autodesk product failed to send the required value for UPITOKEN. the error report sent to autodesk may be incomplete." and then another one also come "FATAL ERROR: unhandled e06d7363h exception at 75b19617h". then finally close.
View 3 Replies View RelatedWhen I search in content explorer it work just fine but when I click on a drawing to open it acts like its opening but right at the end it says Error Decrypting Data and wont open I've tried to look for a solution and I cant find anything.
View 6 Replies View RelatedI just gave one of my drafters a new PC with AutoCAD 2013 and 2012 on it. We migrated the settings from her old pc with with 2012 to the new PC. All settings are correct except for the plotter. She had custom page setup that was used on all her drawings and that did not transfer. We setup a new one with the same settings but that requires us to reapply to every drawing.
Isn't there an easy way to do transfer these settings? If we choose the page setup most of the time it just goes back to none and a lot of the time it isn't even an option.
My drawings typically have 5-10 pages(layouts). The page setup on the layouts have the printer name set to my printer in my office. So I can pulish all layouts and print them all at once. I would like to be able to send these drawings to others with different printers and have them be able to print all layouts at once without going and and changing page setups or anything like that, its mostly non autocad people. How can I set this up?
View 8 Replies View RelatedI'm trying to print a 2D drawing but I would like to add the 3D solid for viewing reference. I can't seem to "flip/rotate" my 3D solid to obtain an isometric view while looking at my 2D drawing from the top view.
how I can get both items to print on a single plot?
I have just downloaded the 3 year trial of AutoCAD for students. I have managed to create a floor plan but struggling to amend the layout. First of all, I would like the page setup to be A3 but that is not an option on my Page Setup Manager as it will only connect to my printer size.
I am also trying to add a Title Block but again do not know what I am doing, or where to download template ones for free?
I have a scan of a drawing that I need to get into photoshop but the scan goes onto page 2 of a pdf file. How can I edit the two scanned pages to end up with the drawing on one page in psd file?
View 5 Replies View RelatedI have PE 9 and could Share photos directly from the Edit page.I am correct that I must now go to the Organizer Bin in order to share? So far this is the only change I hate in the program.
View 4 Replies View RelatedHow do I shrink the edit working space page in Elements 11 so I can read the info on the bottom? Can't see to choose a crop dimension.
View 2 Replies View RelatedUsing Autocad - I am not a designer or engineer so have no experience using the software. I am working on a translation of an autocad file. However when I open the document I can only see the 'front page' of the document and Can't find any way to navigate through the different pages (even if I know there should be a lot more than 1 page)
I realise it sounds like a stupid request, but as mentioned, I have no experience with this software.
getting consistent crash when clicking on "new" in page setup manager dialog box.
Happens regardless of which drawing is open. Even for new blank drawings.This prevents me from creating new pagesetup overrides for Publishing. MAJOR PROBLEM.
At this point I have to get other people in the office to create new page setup for me. Editing existing page setups works find, only the "new" setups are a problem.
AutoCAD 2013 (G.114.0.0 SP 1.1), Windows 7.
Also, AutoCAD internal crash reporter is not called. Goes direct to Win 7, "Application has stop working" dialog.
System Autocad 2013 on PC 32bit
Our company as a .ctb file that has been in use for some time. I have upgraded to 2013 and now...
When I open up old files that contain sheets and page setup.
If I attempt to "Modify" or "Create New" Page setup "Page Setup Manager" goes into lock down and freezes everything.
I am unable to change the setup to re-assign the proper .ctb.
I checked with a new document and I am able to access and use the right .ctb.
This is duplicated on everyone of the machines in our office that has 2013 running on PC.
The one machine with Autocad for Mac 2013 works just fine.
right now we out of four computer, we only have one computer running 2008 that do any printing or PDF'ing.
I tried changing the .CTB to an .STB, with no success. Changing the color space does not appear to work.
Is there a problem with my .ctb file that makes it not compatible with 2013?
Now that we have switched most of our users over to 2013, we are receiving this error - only randomly, not on most drawings - but until it is resolved, we cannot batch plot, publish, because it dumps the plot. Here's a clip of the error we're receiving. When I run a Recover, it doesn't resolve the issue.
View 6 Replies View RelatedWhen I choose the Photoshop Help I'm getting to a page on [URL]...with error 404 saying Sorry, this page is not available. What's the reason for that?
In the past it worked. Some days ago I had to reinstall AIR because it did not update.
I am getting an internal error 3541.K.No.ar when trying to add a page to my existing 6 pages
View 3 Replies View RelatedWhen I try edit block in place this error occurred:
Errors found in references to other objects:
Object reference missing: AcDbXrecord, to AcDbBlockTableRecord
Cancel
I got this error popping up every time I open an iLogic edit rule and all my snippets are gone. Now it has started doing it on a different computer in our office. The error dialog box is in the image below. T
View 4 Replies View RelatedWhen I try to switch to a different layout in a drawing AutoCAD will switch to a different drawing. Then I have to go and get back to that drawing to do anything to the layout.
View 9 Replies View Related