AutoCAD 2013 :: Converting Line To Rectangle Automatically
Aug 20, 2013
I have a query as to how I could automate the replacing of selected individual lines with predetermined sized rectangular blocks centered on the line at the angle and on the “0” layer . See attached file:
The rectangle need not necessarily be a polyline, 4 single lines would be sufficient. And whether the original line is or is not replaced is unimportant either.
View 6 Replies
ADVERTISEMENT
Nov 17, 2013
how I would combine the curved line with the base line of the green rectangle so that it actually replaces the bottom line?
View 4 Replies
View Related
Dec 17, 2013
I'm wondering if there is a method to snap a text object to order to place it automatically parallel (therefore rotate) to the line on the left. see attachment
prob3.jpg
View 9 Replies
View Related
Sep 8, 2011
I work on a field of railways and most of the time i spend my time finding radiuses and lenghts of curves between two railway points. I wonder if autocad could do that automatically for me.
View 9 Replies
View Related
Nov 6, 2013
I wanted to create simple shape for rectangle such that its dimensions are selected from the block table. For that purpose, I have constructed the required constrains (geometric and dimensions) and then a “block table” (attached).
As I tested the behavior to have 1X2 rectangle (attached), I got a rotated one (attached)!-
View 2 Replies
View Related
Oct 25, 2012
So I am attempting to create a simple grading daylight. I began with a 3D Polyline that has only 2 verticies. When I "Convert Feature Lines from Objects," it creates a feature line with 4 verticies. The 1st and last have the initial elevations from the 3D Poly, but the 2 new verticies seem to be pulling elevations off the surface below where I am working.
My questions are: 1) why are new verticies added? 2) can this be prevented?
I know that I can overwrite the slopes in elevation editor, but this seems like an unnecesarry extra step.
Civil 3D 2013, HF3.0
Windows 7, 64-bit, SP1
View 3 Replies
View Related
Jun 11, 2013
Is there anyway to automatically close a message box which has been activated by the line
MessageBox.Show("Message", "Title") after a set period of time? I just want the box to be displayed for a few seconds without the user having to click "ok" or "done" etc.
View 6 Replies
View Related
Jul 13, 2012
Looking for converting DRW files to DWG? I have inherited a library of CAD files at work. Unfortunately, they are all DRW and I only have AutoCAD at my disposal. I need to convert these files to a form that AutoCAD can use.
View 8 Replies
View Related
Feb 14, 2013
The file we generated is on the right side of the image, in both PREVIEW and OUTLINE views. You can see that letters "I" in the logos are boxes and the bottom horizontal stripe is a filled box. In the art file they received, the capital letters "I" in the art and the horizontal box have become paths with DASHES applied.
View 7 Replies
View Related
Sep 12, 2013
For example, I'm making revisions to a plan and drag a block or xref of the floor plan changes where walls/doors/windows have moved. I want to be able to simply pick the underlying linework as opposed to tracing over each line of said xref/block.
View 8 Replies
View Related
Jun 28, 2012
if I select a line, then enter the move command, the line unselects also when I select a line, then hit delete, the line is still there both of these used to work
2013 Civil 3D
View 2 Replies
View Related
May 10, 2013
I've been trying to convert 3D dwg models to 3D dgn models without success, using AutoCAD 2012.
The DGN either displays the solid, which isn't visible in a Microstation extraction or it just exports the centrelines/linework and not the solids.
Is this possible in newer version ? i.e. 2013/2014.
I've tried the export to ACIS .sat file and that works fine, but it moves everything to the same lavel/layer which defeats to object of seperatng the items in the first place.
View 2 Replies
View Related
Aug 8, 2012
I just switched from Autocad 2007 to 2013. In 2007, when you move your mouse cursor on a vertice of a selected geometry, a rectangle for example, Autocad will automatically display the dimension of the geometry. This features seems to have been turned off by default. How to turn it back on?
View 4 Replies
View Related
Nov 23, 2012
I have set may MENUBAR system variable value to 1, But whenever i exit from autocad 2013 this value changes automatically back to 0 and the pulldown menu disappears.
Also i have attached the screenshots of autocad after manually changing menubar varable with pulldown menu vissible and after exiting and starting autocad again to see the screen without pulldown menu and variable changed to 0 again.
View 1 Replies
View Related
Dec 11, 2013
I've been working a while with AutoCad now but this week I received a task which I am not sure is not even possible to do.
I've been exporting drawnings from an other program into AutoCad2013 and all the objects in my drawning appear as loose objects in AutoCad. Can AutoCad create automatically blocks from these loose objects ?
Example : I added a picture of a transformer in this message. This object (2 circles, triangle and star) becomes all loose objects and is NOT one symbol anymore. My question is, if it it is possible that Autocad can recognize these loose objects and create automatically blocks from them. There are a lot of transformers in my drawnings and If I have to do it myself it will be loads of work.
Another thing they asked to do is working with correct European Symbols. I should therefore change blocks in my drawnings into correct one's. I believe when the wrong symbol is already a block it's more easy to change them. I think I should just select all wrong blocks, edit them and then update them. But before this, I have to get blocks in my drawning ofcourse.
View 7 Replies
View Related
Aug 30, 2012
We are implementing a new ERP system and we've programmed the configurator in it to build a price for us. We'd like to create a simple 2D drawing for us in AutoCAD based on some of the data from the configurator automatically. Is it possible using AutoCAD LT 2013 or do you need the full version to build something like this? Also, does this sound like it would require a lot of programming in CAD?
View 8 Replies
View Related
Jan 10, 2014
Is there a way to get the Area option of the rectangle command to work in square feet rather than square inches?
View 9 Replies
View Related
Jun 14, 2013
I am using Revit 2013 student version. I have successfully attached a decal on one of my walls and managed to show a realistic mode of the decal in my elevation. I would like to remove the decal lines (rectangle with x inside) but I am struggling to do this.
I have done some research on the web and so far, found out that I need to select the decal lines (or cross), right click and choose Override Graphics in View > By Element, and check Transparent. The problem is, my system does not display the option for Transparent; I am only given the boxes for Visible and Half-tone.
View 2 Replies
View Related
Apr 1, 2012
Any way to convert all of the single line text in exisitng drawings to multiline text without having to do them individually in Civil3d.
View 2 Replies
View Related
Jul 31, 2013
I was drawing a lot of lines with the pointer that stuck at the end of the line and after that it stuck at the beginning of the other line (i hope you understand what i mean). I don't know what i pressed but now this function is not active and is very difficult to draw the lines.
View 3 Replies
View Related
Jul 18, 2013
I just finished a project without using any coordinate system (it shows none), and now i need it to be in ll84 coordinate system. Is there a way to convert it? When i try to do it, the streets go to a random location (in a random longitude and latitude), and even if i move it to the right place it doesnt work, because the scale of the drawing doesnt seem to be right, and i cant manage to fix it.
View 3 Replies
View Related
Jun 17, 2013
I am working on my company template. We are trying to keep it as close to INDOT standards as we can. Indot uses microstation and provides many files for microstation users. I converted one of the files to a .DWG and impoted all the linetypes to my template. This had a lot of bad side effects.
How to extract the actual code for the Linetypes, so that i can simply re-write a code as autocad wants it and then import?
View 3 Replies
View Related
Feb 19, 2013
I am trying to convert a 2013 ACAD file to ACAD 2010LT but some objects are not viewable in the converted file. I used DWG Truview to convert the 2013 file to 2010LT.
View 3 Replies
View Related
May 23, 2012
Is there a way in AutoCAD 2013 to have it automatically change to a certain layer when you do common tasks. I am wondering if there is a system variable, or a routine that I could automatically load when I start AutoCAD to do this. It would also be nice that the layer would then go back to the original layer that was being used prior to the command. What are my options for doing this.
For instance when I load an xref I would like it to go on the layer; A-XREF. When I insert a block I would like it to go on the layer; 0, when I create a new dimension I would like it to go on the A-DIMS layer, when I create a hatch it would set to the layer A-WALL-PATT, when I add a leader with text it would go to A-ANNO-NOTE, etc..
View 1 Replies
View Related
Jun 26, 2013
Is there a way to create key notes automatically in R2013? Similar to automatic numbering in mtext, but with a hexagon or circle around each number at the beginning of each line. Right now I just type my paragraph then manually insert a key note with attributes at the appropriate location. Problem is when I add or delete text from the paragraph, the line spacing may change, then I have to manually re-align all the key note blocks.
View 6 Replies
View Related
Apr 12, 2013
AutoCAD 2013, 60-90 days into it, upgraded from 2007.
I have 2 of 4 workstations with this issue, AutoCAD will automtically save the file when the files is closed, w/o any prompts to verify of we want to saved or not.
I have my Options|Autosave turned off, but this should not affect the save on close it should only create a continual ac$ backup file.
This is now the 2nd time this has occured. In early March we noticed this and in dealing with AutoCAD (Suscription Service) we finally deceided to restore AutoCAD to factory defaults, which did fix the issue at the time. However it also meant that I needed to retore all the pathways and our standards. Once completed, I paid particular attention to ensuring that AutoCAD was NOT saving the file on close and it was doing so up until earlier this week, when I noticed it SAVING on close again.
Now most of you might think, hey thats a good thing, however, we routinely will test modifications to our layouts on our working files, but dont want to actually modify those files and then we would simply close the drawing w/o saving thus ensuring that those mods were not saved.
In March, both 2007 & 2013 did this, however only my 2013 is affected now.
View 4 Replies
View Related
Nov 1, 2012
Just as of a week ago, it was brought to my attention that my publish stamp has changed to "C:usersjoshuaappdatalocal empacpublish_3412Gi1.dwg" (for example) even thou the location on the drawing I am working on is located on a server, which is normally H:/...../.../...../ Could this be from a adobe pdf driver? I dont know what changed this,
View 1 Replies
View Related
Oct 19, 2013
How do I draw a rectangle or ellipse as a line without fill in Photoshop Elements?
View 4 Replies
View Related
Sep 23, 2013
I need to find out how to import/ convert a real hand drawn sketch into a .dwg or .dxf format so it can be used on a CNC machine to cut the pattern out of a 6mm sheet of aluminium
View 2 Replies
View Related
Mar 19, 2013
is there a simple way of converting a drawing from a complex draiwng including blocks/dynamic blocks so that it becomes effectively a dumb drawing of lines arcs and text.
the only solution i have is to convert the drawing to a pdf then convert it back to a dwg using a pdf to dwg converter.
the reason being i dont want my client to work out how i construct my drawings.
View 9 Replies
View Related
Nov 28, 2012
I installed a brand new install of 2013 Product Design Suite Premium on a new machine. When I go to run Inventor everything seems to work fine. I make a drawing of a part and export to DWG. That's a requirement here. When I go to open the file in AutoCAD, the hatch pattern doesn't show and it looks like the boundaries for the hatch move to 0,0,0. Very stange and I haven't been able to figure this out. I installed Premium on another machine and performed the same export. Works fine on the other machine. The other machine however, has 2012 installed as well. Could this simply be a bad install?
View 9 Replies
View Related