I am working on a 3D model using 3D solids and 3D blocks, then I make a render of a view and works fine, but if I make a zoom in to a zone and render it then the 3D blocks disappear showing only the floor (a 3D solid) and sometimes the render is just plain black, after a zoom out everything works fine. I made an Audit, exploded the blocks, even when making a crop render. Attached images explain better.
View 4 RepliesWhile creating a drawing inserting 3d blocks after closing and reopening the file blocks have disappeared from veiw. When i mouse over the block it shows but goes as soon as i move the mouse. also when zooming different blocks show and disappear?
View 3 Replies View RelatedEditing attributed blocks causes them to disappear from the screen. Edits include changing attribute values, moving attributes, or moving the entire block. The block is not gone, so saving and re-opening the drawing will display it again, but this is a terrible workaround when moving and editing many blocks in a large drawing.
We do not use annotative or dynamic blocks, so these are just good old-fashioned attributed blocks.This behaviour is being seen on both Windows 7 and older Windows XP systems with various hardware specs, and it is only in the 2013 product. We still have some stations running Map 2012 that do not experience this issue even when working in the same drawings.
We have a new title block which now contains various fields to automatically populate the drawing number, number of sheets, issue etc. The problem we have is when we go to zoom all or extents on a layout tab it moves the layout to the right each time. If we only have one layout or we use a plain title block i.e. with no fields, the zoom works fine (layout stays put in the center). This is also true if we directly insert a field onto the layout - again no problems.
The cause of the problem only happens when a block containing a field is inserted onto the paper space of a layout and,there are multiple layouts containing blocks with fields.
I have a problem with the zoom and fill patterns in two PCs with Autocad 2012 In both, very often, when I zoom in on the design the fill patterns disappear.
After an update of the image reappear and this is a very big problem for me. The two PCs are both intel I7, one use a nVidia Geforce and other an nVidia Quadro, and I tried different driver versions but without benefits.
when i started using 2011. I have 2 viewports active; plan and isometric view. But when I try to navigate in the isometric view, the crosshair behaves in a way I don't understand. What happens is that when I zoom in the crosshair disappears over or under what I'm zooming in on.
It's hard to describe, but it seems that it have a different origo then the view represents. When I zoom out so much that the crosshairs are visible and I try to move them upwards, they stop in the middle of the screen and then the marker becomes visible in the ribbon part of the screen.
I have tried detaching all xref's, purged and audit, checked the elevation (0). This only happens in some drawings, not all, and I can't think of a common denominator in the drawings it happens.
Having an issue where in a part model with the view set to "wireframe with hidden edges" the edges and hidden edges disappear when you try to zoom in on the part. Actually not working with "wireframe and visible edges only" at any zoom level either.
The edges are there and I know that there are features that should be showing up as hidden.
Running Quadro FX 3800 with the most current drivers, and I only noticed this when switching to IV 2014.
Also running IV Build 222 SP 1
This is making designing very hard as I can't tell anymore where there are instances of features interfering with each other.
Inventor Pro 2014 SP1
Vault Pro 2014
Windows 7 x64
2.53 Xeon
Quadro FX 3800
24GB RAM
My keyboard has a zoom key with + and - selections. I use to use this key in drawings to zoom in and out when in the AutoCAD application when we had Windows XP. Now that I have Windows 7 I can't do this. I can't find out how to assign this key on the Microsoft Keyboard interactive software either. I have the other keys assigned as desired.
Can I still use my keyboard zoom key to zoom in and out in drawings? If so, how do I set this up in AutoCAD, or do I need to do this through a Microsoft keyboard application?
I just load a new mesh, start to pan or zooming and my mesh, dissapear!. So I unhide again, pan or zooming, and hide again.
View 4 Replies View RelatedBeen using Xara Xtreme Pro 5 for several years and this is an issue that happens now. Parts of lines disappear in a drawing at different zoom levels. The drawing might look perfect at one zoom level, but if I zoom in from say 100% to 500% parts of lines disappear from the drawing. The fix is usually having to click on the line or zoom to a different %. I have attached a picture to show the issue. The hat on the left shows the missing part of the line (circled in red), and the hat on the right shows how the line actually is.
If this was happening in a pc game I would describe it as clipping. I'm on a Pentium 4 PC 3 GHz, Win XP SP 3 2 gigs of RAM. GeForce 6200 if this comes into play .
i'm trying to work with a block by changing the x or y value in properties -- but when i do, the block disappears. i don't work with blocks very often, but someone i'm working with sent me his blocks and i can change the height or width very easily in the properties window -- and his blocks don't disappear!
why are mine disappearing?
The problem happens in different blocks created in Autocad 2009. I need to make blocks with many visibilities and, sometimes, only a few lines need to be turned invisible from a visibility state. Many times when I remove the visibility of a line from a single visibility state, the line erased on all the visibility states. I make my lines "all visible" and it's not there anymore.
The problem is probably in my block since it's doing the same problem on someone else's computer. If the problem is my block, is there a way to "uncorrupt" it?
I have a drawing with some annotative blocks. ie Block name "BAR'.
If I insert another drawing (mostly old v2000 files) as a block which also contains blocks named "BAR" (which of course are non-annotative) the Blocks do not show up.
Is there any way to get arround this? Idealy I would like the old file inserted and have the annotion scale of the blocks in the inserted dbg set to the current scale.
Is it just me or do the actions associated with parameters disappear on occasion from the block editor? Sometimes a regen will make them reappear, other times not. Closing/opening the block editor is one way to make them visible again (worked a few times at least).
View 6 Replies View RelatedI've been tethering to Capture One with a Phase Back then having Lightroom Autoimport the files which works well. The biggest problem I have is that when I want to check focus as I go along and I zoom in on the files in loupe view Lightroom is really slow at rendering up the image. It seems to get slower as the catalogue fills up until it just wont do it. Then if I quit Lightroom and restart its better for a while then slows down again.
Both applications are running on the same Macbook Pro with The latest OSX.
However looking through the files in Capture One they zoom up in size with hardly any delay. I understand that Lightroom has to render a larger preview which is taking the time but surely Capture One has to do this too but doesn't seem to need to take anywhere near as much time to do it. In the case of Capture One it seems to be able to zoom into files that it hasn't previously loaded so there must not be a pre existing preview there.
I received a file that has a large number of blocks with unnamed blocks inside. I need them all to be by layer, and i really don't want to explode it.
How can I can do it?
Sometimes on my "Draw" toolbars, all of my icons disappear! Passing the cursor over it, than they reappear! Made same thing in ACAD 2012.
My video card is a NVIDIA Quadro 600 with the latest driver installed.
Win 7 64
16gb RAM
Xeon 3.07
I have an issue that one of my palettes when I turn it on it flashes and then disappears.
View 5 Replies View RelatedOften whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View RelatedI found that when I open the autocad using Classic view, the icon are dimmed as attache file, however, when I open it in annotation view, it is normal.
View 4 Replies View RelatedWe need to xref a drawing with a different unit. When I go into the drawing file I want to xref and use the "-DWGUNITS" command I change it from feet to inches and use Architectural. Answer yes to all questions and certain objects disappear. Most of the objects are pline or spline objects. Here is what I see in the AutoCAD Text Window:
Scaling failed for: <AcDbZombieEntity FD3C>
Scaling failed for: <AcDbZombieEntity FD3E>
Scaling failed for: <AcDbZombieEntity FD3F>
Scaling failed for: <AcDbZombieEntity FD41>
Scaling failed for: <AcDbZombieEntity FD42>
Scaling failed for: <AcDbZombieEntity FD44>
Scaling failed for: <AcDbZombieEntity FD45>
Scaling failed for: <AcDbZombieEntity FD47>
Scaling failed for: <AcDbZombieEntity 1956F>
Scaling failed for: <AcDbZombieEntity 19570>
There a lot more of scaling failed messages. too many to show. How can I xref in these drawings with different units without objects disappearing?
When I select more than 100 entities all of the grip points disappear. With ACAD 2002 there seemed to be no limit to the number of entities you could select without losing the grips, but with ACAD 2007 they started dissapearing though with '07 clicking "View" "Regen" would bring them back into view (unless you accidentally click on another entity). With ACAD 2013 if I go over 100 that's it. This is mostly a problem for me as I use the spacebar shortcuts extensively in creating and manipulating my drawings. I have found other ways to to acomplish my needs such as using the move command but I have much successful history using my old methods and would like to continue with them.
View 3 Replies View RelatedHow is it possible to have a part in an assembly and then remove it when it is not required?
I have a Skeletal assembly of a cabinet with hinges on the left hand side when facing the front. When a customer requires the hinges to be on the right hand side, I need to make the lock keep disappear from the Right hand side panel sub-assembly and make it appear in the Left hand panel sub-assembly.
At the moment, I have the lock keep, the BOM structure in the file is Normal, this is overidden in the assembly to being Reference for the first instance, the lock keep is fully constrained in both sub assemblies and both are in an array of only 1. I increase the value of the array from 1 to 2 and by a distance of zero(0), the newly added part would have a BOM structure of Normal, consequently it would then appear on the BOM. This method was something I last used when using IV2009, it was a method I used to control both visibility of parts in assembly drawings and on BOMs.
I'm now using 2013 and arraying a part with a overidden BOM structure of Reference makes the new part a reference part aswell even though the file itself is BOM structure of Normal.
On some computers I have a problem. The down arrow at the right of the quick access toolbar doesn't show. I checked that my interface is not lock too. So to customize the quick access toolbar I have to use the CUI.
I don't know if it's related, but my customize toolbar (from my partial menu) have to be displayed manually each time I start AutoCAD but not my custom tab in the ribbon.
I just completed my first topo using Civil3D 2013 (yay!) and now I want to send it to a client. However, when I save it as an ACAD 2007 file and go to open it using ACAD 2007 the spot elevations and all text and symbols associated with them disappear. I can't imagine that you have to have Civil3D to view a Civil3D file. Is there something I can do here?
I did not create a survey database with these points, just imported the .txt file from the field.
Having problem with sheet views losing all their numbering??
Have been using sheet views since the day they came out. Great for cross referencing and not just call outs. But also lists of materials etc. as well. See attached image.
However recently when opening a drawing, boom the views lost all there numbers and restored the name back to what i originally called the view!
See below. The circled view numbers disappear!
Civil 3D 2014 (SP1)
Win 7 Pro x64
DELL Precision Workstation T3500
Intel Xeon 3.3GHz (w3680)
24Gb Ram
NVIDIA Quadro 2000 (1GB)
We recently updated all of our software at my company from 2010 architectural desktop to 2013 autocad. We do a lot of architectural work where we use the "wall" functions to draw our floorplans. I have noticed that the walls are disappearing on some files and not on others. Or we will only be able to see the outside line of the wall, but not the interior, which results in an undesirable appearance to the floorplans.
I have also run across these error messages when opening the files, I dont know if they are related or not:
"Unhandled exception C0000005 (access violation reading 0xffffffff) at address E43AA180h"
and
"Unhandled exception C0000005 (access violation reading 0xffffffff) at address D41218AEh"
I have a problem - when I try to render model to PDF (use DWG to PDF) result is weird and looks like this one:
But when I just render it (same quality settings) result is:
It's a school project and we have to make a layout and "plot" it using DWG to PDF.
I cannot render to file has my "Output file name" box is grayed out and i can not enable it. I'm using AutoCAD 2013 (student edition).
Is it because its a student copy, or am i missing something?
In AutoCAD 2013/14, there is finally the option for removing Pan and Zoom from the UNDO list?
That would be like the invention of the wheel. For me it's a Buy/Don't buy option.
Is it possible to find and zoom to text without switching back to the model space.
ie I am in a viewport in paperspace and i want to find text which resides in model space. I want to zoom to that text in the currently active viewport and not switch to its location in model space.