When creating a pdf with the integrated DWG To PDF, all my text arent recognize with my PDF reader, so i cant do a copy/paste or a search in my pdf.. I use the Arial font and got all fonts installed.
I fount that if a setting on the width factor or the inncline factor of the text is changed, the text is not recognize.
After years of uploading photos with a memory card reader, Adobe suddenly stopped recognizing ithe reader and I can't upload anything. I bought a new reader and got the same results.
View 2 Replies View RelatedAfter plot using "DWG to PDF.pc3", Autocad 2012 will open the pdf with Adobe PDF, how can i prevent is to do this?
View 3 Replies View RelatedWhen i get a page with adoby reader x it just showes a small menu window & will not open the text i would like to read
View 1 Replies View RelatedAutocad 2010 (FULL) dont recognize DLINE
View 7 Replies View RelatedThe problem is that AutoCAD 2010, does not recognize any object snap commands, all the other comands work just fine.
I have reinstalled the program and don´t work.
What could be?
I just installed Corel 13 to my new computer, but it isn't recognizing the text in any of the files from my previous computer. Granted, the files on my previous computer were in an older version of Corel, but that shouldn't be an issue. I can add text to a new document, but even when importing a pdf, the text in the file disappears.
If you drag to select the area where the text should be, it recognizes that something is there. However, you can't see anything or do anything with it. I ran the repair on the installation CD, but I am still having the same problem.
There *is* a command you can use to launch PDF documents from a button in AutoCAD LT, isn't there? (I do mean "open", in Acrobat Reader or equivalent.)
I know there used to be one, because I have macros that used START to open a PDF file. However, they were built for AutoCAD LT 2007, and START is not a known command in AutoCAD LT 2010.this icon should launch the CAD manual..
I have a DXF file in Autocad LT which I need to import into a CAD Reader for a CNC machine. The cad reader can only view a 2D image of the TOP of the part. The problem is that the view I want the cad reader to see is the RIGHT hand side view in Autocad. Is it possible to reassign the views in Autocad LT 2008 so that the right hand side view become the top view therefore allowing the cad reader to see the correct side.
View 2 Replies View RelatedIs there such a software from autodesk that would open iam files and let the user to take measurement only?
View 9 Replies View RelatedA client of mine is unable to read correctly the pdf that I send him. The issue is this: I generate my pdf with the DWG to PDF.pc3 in my ACAD 2012 (64bits).
Within our office, the pdf looks correct, but when our client opens it, the mtext notes appear disorganized.
I am attaching two screenshots: text1 is how our pdf looks, text2 is how it looks when our client opens it.
text1.jpgtext2.jpg
The difference in image quality is because I receive a scan of what he prints.
Like the subject says. I know there is a place to check or uncheck whether you want Adobe Reader to launch after you have saved a file to .pdf but for the life of me I can't remember where that is located.
Inventor 2012
Windows 7 64 Bit
I have one function which generate the PDF file using COM API.
That function works fine and generated the PDF successfully.
Only problem is after generating the PDF, Adobe Reader is opened to display that DWG file which I have plotted.
so is it possible to plotting to PDF file without opening Adobe Reader?
I re-opened a drawing this morning and found some text to be different height from the rest. When I attempted to adjust all of the heights to be the same using the properties method, they all became bigger. Instead of all of them going to 6", the 5" text went to 6" and the 6" text went to 7-3/16". So, I checked the formatting size and the properties size and they did not match. See PDF.
deleting the larger inconsistent text?
I have a drawing which has hundreds of levels on and i'm trying to establish what the MEAN level is and the AVERAGE level. I thought the best way might be to extract the text to excel and perform it there but at the moment the only way i can do it is to copy and paste the text and its taking me forever. Is there a way to either a) extract text to excel or b) calculate a MEAN value based on texted selected?
View 2 Replies View Related(Again) The “leader” of the “dimension text” disappears when the text is moved! Why?
I’m wondering why the “leader” of the “dimension text” disappears when the text is moved.
How can I control this setting?
I need to show this “leader” all the time. Is that possible?
Please, have a look on the screenshots below (the file is attached).
Is it possible to create a field that will show only a portion of the contents within an text object? Maybe using diesel or something?
Example:
There is a text object that contains "FIRST TEST", is it possible to create a field from that object that contains the first 5 letters of the text "FIRST". If the original text was changed to "SECOND TEST" the field would be updated "SECON"
I wonder if it is possible to create a new text style where one can set the text to be already rotated.
I know that it is possible to rotate text in many ways but the styles always seem to be set on the horizontal to begin with.
C3D 2012
Win 7 64 i5
8GB RAM Quadro FX 1800
I know I can rotate text with the rotate command or from the properties palette, but if I'm editing text and the text formatting toolbar is displayed, why don't I have the ability to modify the rotation right there? How do I get it there? Can I customize this toolbar?
View 3 Replies View RelatedMy version of CS8 had a RAW reader with which I could edit and crop files, play with the vignette and saves as JPEG, TIFF or whatever ...
However, my MacBook hard drive just went west so unable to migrate. The discs are back at home, in another country.
Does anyone know how I can get my hands on the RAW reader for my back up MacBook, or at least something I can download fro the net while I'm away?
I want to place text along an arc as shown in example dwg, how do this using array or other method?
View 5 Replies View RelatedI import from my card reader directly to a folder on my hard drive and into LR as DNG files. The next time I try to import, some of the files I previously imported are still checked as well as the new ones on the card. If I try to import the ones I had previously added, they are imported again although I have the "Don't import suspected duplicates" box checked. I have to unchecked all the files and then recheck the new ones.
View 6 Replies View RelatedWhen I try to import the sketchup file into max i get the error "X32 reader terminated unexpected" I have tried importing to 3ds max design 2013 and 2014 and used different sketchup versions and also files as simple as a box. everytime i get the same error.
View 3 Replies View RelatedI just purchased an imac and lr4. I've plugged in my SanDisk card reader and loaded my cf card. lr4 says the files were not imported because they could not be read. The files are Nikon NEF raw. What do I need to do to import them? According to Adobe's web site lr4 comes with Nikon D2X raw format already included.
View 1 Replies View Relatedhow to open adobe acrobat reader without having to open photoshop? i keep getting this message when opening pdf files. "adobe acrobat was installed as part of a suite. to enable adobe acrobat, please start another component of this suite(such as photoshop)
View 2 Replies View RelatedHow do I activate the card reader? It used to read it but now it won't.
View 1 Replies View RelatedI have latest version of LR4, just tried to import raw and jpg.'s from my card reader for a 5dMKIII. The jpg files will import but the raw do not. Latest version of raw on Mac Lion.
View 5 Replies View RelatedJust upgraded my primary catalog to LR4. The LR3 import problem that started in ~3.3 or 3.4 has not gone away. Import effectively hangs the app.
I have a 6 proc AMD 1055T, Win7x64, w/ 16GB ram, an ATI 5770HD video card driving two monis, one 27" and one 24", and a ton of disk space (4 hd: c 384 free of 931, x: 191 f of 1.36TB, y: 1.55TB f of 2.72TB, z: 1.4TB f of 2.72TB). Free space isn't the issue. I usually do have several network shares connected; disconnecting them and removing all optical media makes no difference. My primary catalog has ~30,000 images When I try to import, the dialog itself takes up to a minute to open.
Eventually, the select source prompt appears; clicking on my usb2 card reader causes the dialog to disappear for a long time, sometimes > 2 minutes. The busy icon is displayed.If I'm super patient, the import disalog will open, but can take many minutes (3-5) to display, and once displayed, the busy icon remains and the dialog is not interactive for another long period, for example, right now, it's been > 10 mins on the 8GB card I'm trying to import from, import dialog visibility comes and goes, interacting with the scroll bar works, but so far I've only been able to scroll about half way thru the picture previews
This is obviously unusable. I've perverted my workflow at this point to be:
Copy images to temp folder in pictures hierarchy Sync temp folder, adding new images, without showing the import dialog Then, in Library view, I copy the new pictures to their final dest in my pictures folder hierarchy.
I just converted the catalog, so presumably it's optimized (optimizing made no difference in lr3.6 perf). As I said, this perf problem started in 3.3 or 3.4. ABout the only improvement I see is that I was able to successfully cancel the import; in 3.6 the app just stayed hung.
After a complete computer format, I was able to make cs6 work. Then I started experiencing slowdowns again. What had I installed that was not ok? Well, turns out that restoring my pc to a point right before the installation of Adobe Reader fixed everything. And I have the same problems if I go on a webpage where Flash Player is working.
View 3 Replies View Relatedmy pc did not recognise lightroom as an option and I (stupidly) clicked and have all my pictures labelled as pdf?
View 3 Replies View RelatedI recently installed a trial version of Photoshop CS2 which was on a disc lent to me. I am now regretting this action because when I go to open a PDF file it defaults to Photoshop instead of Acrobat Reader.When attempting to un-install this trial version of CS2 I get an error message "Error 1324. The path 'My Pictures' cantains an invalid character"
View 10 Replies View Related