My version of CS8 had a RAW reader with which I could edit and crop files, play with the vignette and saves as JPEG, TIFF or whatever ...
However, my MacBook hard drive just went west so unable to migrate. The discs are back at home, in another country.
Does anyone know how I can get my hands on the RAW reader for my back up MacBook, or at least something I can download fro the net while I'm away?
how to open adobe acrobat reader without having to open photoshop? i keep getting this message when opening pdf files. "adobe acrobat was installed as part of a suite. to enable adobe acrobat, please start another component of this suite(such as photoshop)
View 2 Replies View RelatedHow do I activate the card reader? It used to read it but now it won't.
View 1 Replies View RelatedAfter a complete computer format, I was able to make cs6 work. Then I started experiencing slowdowns again. What had I installed that was not ok? Well, turns out that restoring my pc to a point right before the installation of Adobe Reader fixed everything. And I have the same problems if I go on a webpage where Flash Player is working.
View 3 Replies View Relatedmy pc did not recognise lightroom as an option and I (stupidly) clicked and have all my pictures labelled as pdf?
View 3 Replies View RelatedI recently installed a trial version of Photoshop CS2 which was on a disc lent to me. I am now regretting this action because when I go to open a PDF file it defaults to Photoshop instead of Acrobat Reader. When attempting to un-install this trial version of CS2 I get an error message "Error 1324. The path 'My Pictures' cantains an invalid character"
View 10 Replies View RelatedWhen i get a page with adoby reader x it just showes a small menu window & will not open the text i would like to read
View 1 Replies View RelatedI use my card reader to download images. In PSE11 how can I be selective in the number of images I download at any one time. Say there are 200 images on the card & only want to download the last 20. How do I avoid downloading all 200 images & then having to delete the 180 I had already previously downloaded?
View 1 Replies View RelatedWhy can't Elements 9 import raw files from my card reader? I am using Fujifim X 20 camera and have downloaded latest version of Adobe Camera Raw.The card reader only imports JPGs. Is there something I should to make sure elements uses the latest Raw Converter?
View 2 Replies View RelatedAfter years of uploading photos with a memory card reader, Adobe suddenly stopped recognizing ithe reader and I can't upload anything. I bought a new reader and got the same results.Â
View 2 Replies View Relatedi have an offline icon on my pics in elements 11 organizer after i remove the sd card from the reader
View 2 Replies View RelatedIn PSE9, how do I set up the Downloader to apply my metadata templates on importing images from a card reader? Previously the Downloader dialog box included this option but my PSE9 Downloader dialog box does not.
View 7 Replies View RelatedThere *is* a command you can use to launch PDF documents from a button in AutoCAD LT, isn't there? (I do mean "open", in Acrobat Reader or equivalent.)
I know there used to be one, because I have macros that used START to open a PDF file. However, they were built for AutoCAD LT 2007, and START is not a known command in AutoCAD LT 2010.this icon should launch the CAD manual..
I import from my card reader directly to a folder on my hard drive and into LR as DNG files. The next time I try to import, some of the files I previously imported are still checked as well as the new ones on the card. If I try to import the ones I had previously added, they are imported again although I have the "Don't import suspected duplicates" box checked. I have to unchecked all the files and then recheck the new ones.Â
View 6 Replies View RelatedI have a DXF file in Autocad LT which I need to import into a CAD Reader for a CNC machine. The cad reader can only view a 2D image of the TOP of the part. The problem is that the view I want the cad reader to see is the RIGHT hand side view in Autocad. Is it possible to reassign the views in Autocad LT 2008 so that the right hand side view become the top view therefore allowing the cad reader to see the correct side.
View 2 Replies View RelatedWhen I try to import the sketchup file into max i get the error "X32 reader terminated unexpected" I have tried importing to 3ds max design 2013 and 2014 and used different sketchup versions and also files as simple as a box. everytime i get the same error.
View 3 Replies View RelatedIs there such a software from autodesk that would open iam files and let the user to take measurement only?
View 9 Replies View RelatedI just purchased an imac and lr4. I've plugged in my SanDisk card reader and loaded my cf card. lr4 says the files were not imported because they could not be read. The files are Nikon NEF raw. What do I need to do to import them? According to Adobe's web site lr4 comes with Nikon D2X raw format already included.
View 1 Replies View RelatedWhen creating a pdf with the integrated DWG To PDF, all my text arent recognize with my PDF reader, so i cant do a copy/paste or a search in my pdf.. I use the Arial font and got all fonts installed.
I fount that if a setting on the width factor or the inncline factor of the text is changed, the text is not recognize.
A client of mine is unable to read correctly the pdf that I send him. The issue is this: I generate my pdf with the DWG to PDF.pc3 in my ACAD 2012 (64bits).
Within our office, the pdf looks correct, but when our client opens it, the mtext notes appear disorganized.
I am attaching two screenshots: text1 is how our pdf looks, text2 is how it looks when our client opens it.
text1.jpgtext2.jpg
The difference in image quality is because I receive a scan of what he prints.
I have latest version of LR4, just tried to import raw and jpg.'s from my card reader for a 5dMKIII. The jpg files will import but the raw do not. Latest version of raw on Mac Lion.
View 5 Replies View RelatedJust upgraded my primary catalog to LR4. The LR3 import problem that started in ~3.3 or 3.4 has not gone away. Import effectively hangs the app.
Â
I have a 6 proc AMD 1055T, Win7x64, w/ 16GB ram, an ATI 5770HD video card driving two monis, one 27" and one 24", and a ton of disk space (4 hd: c 384 free of 931, x: 191 f of 1.36TB, y: 1.55TB f of 2.72TB, z: 1.4TB f of 2.72TB). Free space isn't the issue. I usually do have several network shares connected; disconnecting them and removing all optical media makes no difference. My primary catalog has ~30,000 images When I try to import, the dialog itself takes up to a minute to open.
Eventually, the select source prompt appears; clicking on my usb2 card reader causes the dialog to disappear for a long time, sometimes > 2 minutes. The busy icon is displayed.If I'm super patient, the import disalog will open, but can take many minutes (3-5) to display, and once displayed, the busy icon remains and the dialog is not interactive for another long period, for example, right now, it's been > 10 mins on the 8GB card I'm trying to import from, import dialog visibility comes and goes, interacting with the scroll bar works, but so far I've only been able to scroll about half way thru the picture previews
Â
This is obviously unusable. I've perverted my workflow at this point to be:
Copy images to temp folder in pictures hierarchy Sync temp folder, adding new images, without showing the import dialog Then, in Library view, I copy the new pictures to their final dest in my pictures folder hierarchy.
Â
I just converted the catalog, so presumably it's optimized (optimizing made no difference in lr3.6 perf). As I said, this perf problem started in 3.3 or 3.4. ABout the only improvement I see is that I was able to successfully cancel the import; in 3.6 the app just stayed hung.
After plot using "DWG to PDF.pc3", Â Autocad 2012 will open the pdf with Adobe PDF, how can i prevent is to do this?
View 3 Replies View RelatedIn trying to import photos, first form a DVD and also from a CF card reader. The error message on my DVD says that there is an initialization error (OK, OK , the DVD with photos was created on another laptop, running on Windows Vista, so it may be a Read Only file). Aside from that, however, my CF card with photos does not even show up on LR3.
Â
I have gone to System Preferences and changed the way I want CDs and DVDs to show. In both cases I changed it to "Open in LR3". Is that wrong?
Â
Here is a Screen shot of LR3 Library when tryingn to import photos. No (CF card) drive is shown.
Â
file://localhost/Users/dennisluz/Desktop/Screen%20Shot%202012-03-19%20 at%204.29.50%20PM.png
I've just started using a data reader to import my photos to my mac but have realised that the photos that I have imported have not saved to the hard drive. If I remove it and try to edit a photo in previous import, it says it can't find the file.
View 4 Replies View RelatedI just downloaded LR4 and when I plug in my card reader the images will not open and the icons on the upper rt and upper left are not present. How can I resolve this to show my images so they can be seen and selected?
View 4 Replies View RelatedWhile using Corel, I click HELP, GUIDEBOOK and the Guidebook opened with a pdf reader I used.Then, I uninstalled the pdf reader and started to use Adobe Reader, however now within CorelDraw the GUIDEBOOK will NOT open.
I went to Windows XP, folder options and registered pfd files with Adobe Rreader, but Corel still will NOT open the GUIDEBOOK.
Like the subject says. I know there is a place to check or uncheck whether you want Adobe Reader to launch after you have saved a file to .pdf but for the life of me I can't remember where that is located.
Inventor 2012
Windows 7 64 Bit
I have one function which generate the PDF file using COM API.
That function works fine and generated the PDF successfully.
Only problem is after generating the PDF, Adobe Reader is opened to display that DWG file which I have plotted.
so is it possible to plotting to PDF file without opening Adobe Reader?
I just installed Photoshop cs2.
How do I change the setting to open pdf files in Reader, not Photoshop?
One of the features I was really looking forward to in CS6 was creating fillable forms with ONE application. I created a form following the step by step instructions in classroom in a book for CS6. When I opened the exported form in Reader X, I get a "This operation is not permitted" error. I opened the completed "end" document in the lesson to make sure I didn't commit an error, and I got the same message when exporting. I have looked for places in menus to modify security restrictions and I can't find any. I installed the updates and that didn't solve the issue.
Â
I saw one solution posted which is to open the document in Acrobat, then do a "save as" option.  Is there anything we can do that doesn't involve buying additional software? If this is not the case, then Adobe seriously needs to change its training and advertising about this functionality.