I'm coming back to Autocad after a break of several years and a lot of versions. I'm struggling to remember how to do basic things.
I've got a large drawing containing a lot of tiny hexagons on a layer and I need to increase the size of all of these at the same positions.
I'm doing a program in Visual Basic 2010. In one of the forms I put a button that when clicked must open AutoCAD 2012 and make a drawing in it. The user will decide where to save it.The steps are these:
1. I added the references Autodesk.AutoCAD.Interop and Autodesk.AutoCAD.Interop.Common to the Visual Basic Project. That's OK.
2. I wrote this in the heading of the form's
- Imports Autodesk.AutoCAD.Interop
-Imports Autodesk.AutoCAD.Interop.Common
3. In the event Click of the Button1 I put this:
Dim acadApp As New AcadApplication 'Create an instance of an AutoCAD Application
AcadApp.Application.Visible = True 'Show the instance of the AutoCAD Application
Dim acadDoc As AcadDocument 'Create an intance of an AutoCAD Document
acadDoc = acadApp.Documents.Open("C:Respaldo TesisDibujo2.dwg") 'Open a Document called Dibujo 2
'Draw a line
Dim PT1(2) As Double
[code].....
I've been using 3DS Max for the past 12 years(from version 3.5). Over the years I have witnessed various upgradation in the versions till date which have highly improved. In the latest 2013 version there has been one modification made in the software among the others which has actually increased the model making time than before. In the previous versions the selection of a particular object in the model happens by zooming into the object and just clicking on it, whereas in the 2013, though clicked on the the desired object in the model the selection happens based on the draw order of the objects in the model, based on the placement on the view and clicking further multiple times on the same position selects the object depending on the number of objects over it in the view which is a time consuming process. Is there a method to change the settings of the selection process?
View 4 Replies View RelatedI have just downloaded 3dmax design 2012 and on creating a basic object (a box)it emerges in a slow shower of litle dots very like sparks. This may be vertices or a point cloud whatever. They then stay in view , when viewing the box from another angle then the surface seems to swirl with patterns. I dont have this problem on my previous 2009 version.
View 1 Replies View RelatedI'd like to know how to align an object in model space with the edge of my viewport in paperspace.
When I draw, I like to lay out multiple complete drawings in model space, make an appropriately scaled bounding box around them, and then snap a view port to the bounding box in my layout. I usually have multiple drawings lined up in a row in modelspace, so when I want a new layout I do a Save As and then pan around in my viewport to find the next bounding box, at which point I have to resize the viewport to get it to snap to the edges nicely. I really want to be able to to it the otehr way around- while panning I'd like to be able to grab a corner of my modelspace bouding box and snap it to the the corresponding corner of my viewport window. That way making new layouts would be a snap. Is there a way to do this in AutoCAD 2012 LT?
Something changed in my settings & I don't know how to chance it back. I can't click on to select objects inside or behind objects. What do I have to change to be able to select any item I click on regardless of where it is?
View 1 Replies View RelatedTrouble with embedded OLE DWG objects in word 2010 not opening with AutoCAD 2012
We have a user that can't open some OLE DWG files from within a word document. He had 2010 AutoCAD LT on his machine for a while then was upgraded to 2012 AutoCAD (non LT) once that was there LT 2010 was unistalled. since then he has not been able to open certain embedded OLE files within Word. Other users that have other ever had AutoCAD 2012 have no issue opening this embedded DWG files.
i found this thread (URL....) which sounds exactly what is going on with my enduser. But the fix provided is for AutoCad 2000-2012 not the LT versions.
I am using autocad 2013 primarily and other employees are using 2010. I am saving my drawings as 2010 and for me there are no issues. On the other hand people using 2010 are having objects missing in the drawing. All layers are turned on and all thawed. The primary objects missing are AEC objects. Is there a switch to show or hide these object?
View 2 Replies View RelatedI am currently using AutoCAD Architecture at work which allows me to use AEC "smart" objects (walls, windows, doors). This is a staple in my AutoCAD experience. I am planning on branching off and starting my own business and was hoping to only purchase AutoCAD LT, vs the mega expensive ACA, seeing as I don't use any of the other 3D tools. Is there any way to use these AEC objects with AutoCAD 2012? or even AutoCAD LT? Or are these tools exclusive to ACA?
View 2 Replies View RelatedI am using Land Desktop 2004 but I am posting here in hope that 2012 users will have experienced this issue in the past.
The problem is thus: I am using the SNAPSHOT tool in Adobe Reader to capture some standard drawings in a PDF to the clipboard. I then paste these captures into AUTOCAD as OLE objects. I have been doing this forever without problems. In this particular drawing when I close and re-open the OLE objects are blank rectangles. The reset button is gray in the OLE object properties so there is no way to reset them. Everytime I remove them and redo the process they are gone when I re-open the drawing. AUDIT runs clean.
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
[URL] ....
My aperture / crosshairs seems to have a magnetic attraction to all objects in drawings. Over an empty area, motion is smooth. When crossing over any object(s), be they in Model Space or a Layout, the cursor is attracted to objects. Is this an AutoCAD setting that I'm not aware of, or is this a graphics card / hardware acceleration issue?
View 6 Replies View RelatedI am exporting a design for 3D printing, and it includes multiple objects. If I save each part as a separate STL file, and assemble them in my 3D printer software (Object), the alignment of different parts is lost.
If I save it as a single STL file all the objects are grouped, and I cannot select them individually to assign them different properties.
I am using Autocad 2012 student version, and it does not allow me to select any option at the moment of exporting the files.
I have a drawing with objects on multiple layers, however when I select an object, they all show as whtever layer is showing. If I open the drawing on antoher machine, everything works properly with multiple layers.
View 2 Replies View RelatedI have a personal block library, that somehow has gotten "infected" with AEC. I'm not using any AEC objects on purpose - but loading my library file now loads the various AEC object enablers. How can I find the mysterious entity that is using these?
View 1 Replies View RelatedI am working on a design project for a class i am in, i need to make a model of the design solution i come up with. since my design has curved walls, how to take my AutoCad model and convert the faces to something where i could print them out on paper and make the model. I need to basically unroll them as if i was flattening them on a sheet of paper. i have tried flatshot and flatten, my difficulty with these is that it does not take the entire object length along the curve, it will only take the distance that can be seen on the screen. I know this is possible with 3ds max as a friend of mine did it that way, but i don't know how to use 3ds max so that doesnt work for me.
View 1 Replies View RelatedHow Do I find the total length of several objects or separate lines without having to click on each one individually and add them up.
View 5 Replies View RelatedI've recently started having a problem where some objects that I edit or insert, such as blocks, only show in white. The photo I show is an example. I recently used viewport clip in order to add in the detail shown on the top right, and when I did so, the viewport went white, and it has since not changed. It is supposed to show in yellow, as shown with the other viewports. When I change to "bylayer" it is white, and when I manually change it, it stays white. As shown, I've changed it manually to cyan, and it remains white.
I think this may be an obsucre system variable problem, but I'm not sure where to start.
I have a bunch of dwg's that were converted from dgn's using Microstation V8's batrch convert utility. In many of them there are these Mtext objects that, when I hover over them, or when I pick them to change their properties using the properties dialog, slow performance way down. I have to wait about ten seconds for the machine to catch up.
This can get pretty annoying since it ouccurs when I merely cross over the objects when I am not in any command whatsoever.
The text objects are referring to a font that I do not have installed on this machine. I think it defualted to using simplex.shx as a result. I did not get any errors or warnings about the missing shx when I opened the file.
Using Civil 3D on a 64 bit Win 7 Dell POS - everything is up to date.
C3D 2012 on 64bit Win 7 all up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
LDT/C3D user since release 12
While in model space anything I insert, copy/paste or bring into model space looks squashed compared to the original data. It's like the Z axis is rotated. As it sits all the original data in model space looks fine or "flat" as it should.
When measuring the inserted squashed object it's giving me the correct dims but because it's squashed 18" looks like 12", if that makes any sense. Also if I copy/paste the original data in model space into another new template it then looks squashed.
Is there a system variable or setting just for that dwg that could have been changed?
I can rotate my crosshairs by using ucs object, but how do I rotate all the objects in the drawing to be horizontal on my screen?
View 1 Replies View RelatedI work on DWG importer and every now and then I come across some files which behave strange. To take as an example, I am working on a file reported to be having unwanted entities when loaded through our importer. This file when loaded in AutoCAD shows proxy entity and nothing else. When I do "zoom to extents" and select the visible entities by selection window, it shows
Select objects: Specify opposite corner: 5767 found, 1988 groups
Now if I do the selection and say "select: all" instead of using selection window it shows:
Select objects: all
5805 found
9 were on a locked layer.
2 were not in current space.
So apparently there are 38 (5805 - 5767) objects which are either invisible or ignored by AutoCAD when I do "zoom to extents".
1. Is there any way in AutoCAD to make all the objects visible?
2. Why "Zoom to Extents" must be ignoring these objects?
3. What is the meaning of "2 were not in current space."? Does that mean, that the drawing file is simultaneously referring to two Coordinate Systems?
I am having trouble with my selection box. Ordinarily, when I am trying to select multiple object, I can just create multiple selection boxes and it keeps adding more and more objects to my selection. However, it recently started acting funny--it stopped selecting things after the first box was drawn. No matter how many boxes I drag, it won't add any more objects to my selection.
View 3 Replies View RelatedI am in top view but my objects look distorted like they are on an angle?
View 3 Replies View RelatedSuddenly, when I select objects, the existing selected objects deselect. If this is a setting I inadvertently misused I don't know why the setting exists. How I can get back to selecting successive objects?
View 2 Replies View RelatedI just wanted to add some materials to my objects and it seems some menu entries on Toolpalettes are missing (masonry etc.). I installed the full version of AutoCAD 2012 and also downloaded some additional material libraries. I'm attaching some screenshots of missing menu items and a screenshot of installed items in control panel.
View 3 Replies View RelatedI am in top view but my objects look distorted like they are on an angle?
View 2 Replies View RelatedSetting a lineweight for the dimension objects,As the dimension object contains: text, dimension line and extension line and behaves as a block, then why the arrowhead (oblique) of the “dimension line” doesn’t follow the lineweight chosen for all the dimension objects?why the "arrowhead" (oblique) is thicker than other dimension elements?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I have this problem with my drawing. before I decided to post here, I first ask mr. google about the problem but to no avail. anyway, here's my problem:
I have this drawing. 3d object. with multiple items. and would like to create a 2d detailed view of the items.
what i did was isolate the first item and did the base view command. after the command, I then hid the first item and isolate again the second item. but then I always get this pop-up menu that says "A model has changed" and my item is missing. I ignored the warning and poceeded with my second model and so, on. after the process I unisolated all my items and most of the drawings are there and some are lost. Is there a proper way of doing this base view for multiple objects without disrupting the previous drawing that I objects?
In the old days (15years ago) we scanned a lot of files to DXB, and simply imported the image into the .DWG as small objects. (I believe they were treated as polyline segments).
Now, I am forced to Import a TIFF and "embed" the object (if I want it to be a permanent part of the drawing), and edit it with separate programs like Raster Design. How to convert a "embedded raster image" into a DXB image?
The scanner used to do the work for me and save the image as DXB.It was not a "vectorization program", but the raster lines became small (not joined) polyline segments in the process.I don't want to "vectorize" with a separate program, because then it just "traces" with a zero-width polyline.The old scanner used to save to DXB, now I don't even see that as an option.
Any words of wisdom about creating a "scan" that can become "objects" (even small dots) INSIDE the DWG file, instead of a "Raster Image" that has to be xref'ed or "embedded", and will not even plot to a DXB or HPGL format?
how annotative objects function through xrefs and am running into some trouble.I created a brand new drawing, made an annotative symbol and 2 peices of annotative text, all three have 1"=20' and 1"=40' assigned to them. I can switch my scale back and forth and the objects act as they should.
If creat a second drawing and xref the first one, the only way I can see these xref'd objects is if I set ANNOALLVISIBLE to "1" or if I select one of their xref scales as the current scale 1"=20'_Xref or 1"=40'_Xref.
My goal is to be able to have plans that are annotative that can be xref'd into another annotative drawing and have the objects in both that are the same scale show up.
I have made gridlines and put them on a locked layer. I want to be able to see them and snap to them, but I don't want to select them. Their selectability is hindering my ability to select objects on other layers. Is there any way to make lines on locked layers not selectable? (I don't like the Autocad standard grid.)
View 9 Replies View Related