After Effects :: Why Does Pasting Multiple Layers Into A Different Comp Ruin The Order

Feb 25, 2013

I have 6 layers in a comp, and I'm taking them across, via copy/paste, to another comp.  Each second layer is an Alpha channel for the one below it.  However when they're pasted into the next comp they ALWAYS are reversed, or randomly resorted, ruining everything about their blends and alpha relationships with one another.
 
Why does After Effects do this? Is there a way to prevent it from happening?
 
This doesn't just happen in this instance, I've noticed it nearly always happening when pasting multiple layers. 

View 2 Replies


ADVERTISEMENT

After Effects :: Aligning Text Animations In Nested Comp (imported PSD) To Music In Main Comp?

Mar 10, 2014

I've imported the PSD file as a comp, and made changes to the text animation, but this is now a nested comp, and the music is in the main comp. How do I change the timing of the nested comp while still having visibility of the music track?

View 4 Replies View Related

After Effects :: Reduce The Opacity Of A Comp Within A Comp Seamlessly?

Jun 11, 2013

I have comp A (imported from PS) that's a rectangle background with text & lines above it - which is inside comp B.
 
While on B I'm reducing the opacity of A from 100 to 0, normally over 10 frames, and the text and lines' opacity goes down normally... except the rectangle background! It's opacity is staying the same during the first 9 frames and then going from 100 to 0 in the last one.
 
As an experiment I replaced that PS layer with a solid from AE and it works fine. The whole comp's opacity reduced gradually from 100 to 0 over 10 frames.
 
What causes some layers to behave as described above?

View 1 Replies View Related

After Effects :: Hold On Last Frame For Remainder Of Comp

Apr 2, 2013

I have a clip on a layer that is 6:20 in length. I want to hold on last frame for the remaining time in comp (10:00). I am fairly new to AE. I am using CS6.

View 2 Replies View Related

After Effects :: Comp Renders As Black Screen?

Dec 3, 2012

My AE comp renders as a full-length video of a black screen (with audio, when enabled). Comp plays fine in RAM preview, and I've tried all types of codecs and disabling RAM intensive effects, though I'm working on a quad-core i7 macbook pro with 8 gigs of RAM, so that shouldn't be a problem.

View 10 Replies View Related

After Effects :: Colours In An Image Comes Out Different After Rendering Comp?

Apr 16, 2013

For a project, I've imported a jpeg file that I made on Photoshop. The colors look perfectly fine on the RAM previews and stuff but after I render it, just that specific jpg image comes washed out. It should be dark grey / almost black but after rendering into .mov that image becomes medium grey. It's noticeably more washed out and lighter. All the other colors in that image are also noticeably lighter as well.
 
I have set my working space to my monitors color profile and I have proofed the colors after saving on Photoshop.

View 5 Replies View Related

After Effects :: Current Time Indicator Won't Move To End Of Comp In CS6

May 31, 2013

The current time indicator won't move to end of comp in AE CS6. I setup a new comp at 10 seconds. When I drag the current time indicator OR hit the End key to bring the current time indicator to the end of the comp it stops at a value of 9:23. Is this a bug?

View 3 Replies View Related

Photoshop :: Actions: Copying Layers From One Comp To Another....

Nov 26, 2006

Here's what I want to do:

I want to process a series of pics for my photography business and I think I have a way to do a great deal of them with minimum effort. What I want to do is to work on one photo and create a smaller project that I copy and paste my Adjustment layers in. Then, I want an action to go through my queue of pics and copy the layers over, create a blurred layer (for skin touch up) and a sharpened layer. That way, when it's done, all I have to do is open each saved PSD and do touch up as needed.

The problem is that I can't get an action to recognize that I'm dragging a layer over from one comp to another. Is there a way, instead of creating a brand new action for each set of pics, to do what I want to do?

View 1 Replies View Related

After Effects :: Motion Blur Effect Doesn't Stop After The Comp Stops Moving?

Jun 30, 2012

I am animating comps in After Effects CS6, and I'm quickly moving objects across the screen using positioning keyframes and changing size using scaling keyframes.  Most of the time it works great; but sometimes the motion blur effect keeps appearing *after* the object has stopped moving.  Not just for a second -- but forever.  It appears correct when scrubbing on the timeline, but when I render the final output movie, a non-moving object sometimes has motion blur all over it. 
 
Sometimes I can fix it by un-parenting some layers inside the comp...  other times it doesn't fix it.  Sometimes I just delete it and start over and it works.  Seems more like a bug then something I'm doing wrong.
 
I also tried on my Mac Pro tower and Macbook Pro laptop in case it was a graphics card issue; it isn't, the exact same problem manifests itself in both areas.  I did just discover that turning continuous raster OFF does seem to fix the problem--but then my vector images are blurry when I zoom in...  and that again sounds more like a bug, not like an incorrect setting.

View 11 Replies View Related

After Effects :: How To Animate The Color Of Multiple Layers At Once

Sep 7, 2013

I've created a grid of around 80 individual text layers (each layer is a single letter) and first, I want to animate their opacity as a group, then INDIVIDUALLY animate their opacity (again) and color.  How do I do this?
 
Also, while I'm asking, I have two simpler questions:
 
- is there a way to animate the color of multiple layers at once so I don't have to click on each individual layer and do it manually?
- how do I achieve a "swipe" opacity effect?  If this is not clear I can explain but I won't bother for now.

View 1 Replies View Related

Photoshop :: Applying Effects To Multiple Layers Simultaneously

Jan 8, 2008

I'm working on an image, and I need it to say "The Wedding of Jane Smith."

I have 4 different text layers showing up, and they're all visible. (a real small "the," a much larger "Wedding," a small "of," and a large "Jane Smith.") I like to have the different words on separate text layers so I can move them around and lay them out the way I like.

I got to the point where I wanted to apply blending effects to the text (drop shadow, bevel, whatever). Now, since I have 4 different text layers, what I'd normally do is merge them into one rasterized layer and then do my effects. But I'm wondering if there is a better, more non-destructive way.

I do video graphic design at my job, working with a video editor, and it would be extremely convenient if I could apply effects to multiple text layers without first rasterizing and merging the layers. i.e. when my boss or the client is looking over my shoulder, and I can show him what the text looks like with the blending FX without having to commit to the text placement/size by rasterizing/merging.

View 5 Replies View Related

Photoshop :: Applying Effects To Multiple Text Layers Simultaneously?

Jan 8, 2008

I have 4 different text layers showing up, and they're all visible. (a real small "the," a much larger "Wedding," a small "of," and a large "Jane Smith.") I like to have the different words on separate text layers so I can move them around and lay them out the way I like.

I got to the point where I wanted to apply blending effects to the text (drop shadow, bevel, whatever). Now, since I have 4 different text layers, what I'd normally do is merge them into one rasterized layer and then do my effects. But I'm wondering if there is a better, more non-destructive way. Code:

View 1 Replies View Related

Edge Animate CC :: Multiple Compositions On A Page / First Comp Stops Playing

Dec 13, 2013

I have two compositions on a page and I identify them within the AdobeEdge.bootstrapCallback. As soon as the user scrolls to the first animation I want to start it with an external call (compId.play()). If this is the only composition on the page it does work correctly. But as soon as the second one is added to the page it doesn't play at all. If I trigger the first animation via the console (e.g. compId.play(1000)) the animation jumps to the 1000 ms mark but then it stops immediately and doesn't play on.

View 4 Replies View Related

Photoshop :: Pasting Multiple Photos In One File

Mar 20, 2009

I have finished designing a postcard that I wish to print and need to get the card to fit into an Avery template I downloaded from their site.

I cannot copy the picture and get it to change to the correct size for post office standards. I can get one on its own. I cannot get anything remotely close to the correct size into the template. Every time I copy and paste it does so but really really small and unable to change the size of the image at all once it is in the template.

View 4 Replies View Related

Photoshop Elements :: Moon Effects - View Both Layers And Effects Panel At Same Time?

Apr 9, 2013

I have PSE11 and purchased Paint the Moon effects.  How can I view both the Layers panel and the Effects panel at the same time?  Was this an option in older versions of PSE that are used in the Paint the Moon tutorials?

View 2 Replies View Related

AutoCad 2D :: Pasting Multiple Annotations From Text / Excel

May 21, 2012

I'm trying to paste in things like "N.G.", "Top of Bank", "Edge of Water" all at certain points to annotate the topography. I've tried the following:

text N.G 800,90
text Top of Bank 820,90

But I keep getting the prompt for annotation angle and it gets stuck there so I tried:

text N.G 800,90 90
text Top of Bank 820,90 90

But the same thing occurs. I need the text to be vertical. I've done some searching here, but haven't come up with much. I don't want to resort to creating blocks and importing the attributes as I'm sure it's much easier than that.

View 1 Replies View Related

Lightroom :: Pasting Settings To Multiple Images In Flimstrip

Oct 23, 2011

When I finish adjusting (in the Develop Module) and I click "copy" and select the items I want to copy, then what I want to do is apply (paste) these settings into a number of images.
 
What I'm doing is then I highlight ("Crtl+Click") several images in the Filmstrip.  Once these images are highlight (filmstrip images highlighted), I then click "Paste" - but the only image that is changed (settings applied) is the first filmstrip image.
 
How do I select in the filmstrip the images I want to adjust (apply the copied settings) and have the settings applied to all the selected images?
 
I'm sure this is obvious and there has got to be a way to apply this "recipe" to all the selected images without having to create a collection or do it one-at-a-time.
  
This is proably the same issue, but when I want to rotate several images (in the Library module), if I select them in the flimstrip, only the first image rotates when I click the clock-wise or counter-clock-wise arrow.  Same issue?  Can this be done in the filmstrip?

View 9 Replies View Related

After Effects :: Random Image Order In Sequence After Import

Apr 8, 2014

When I import images as a sequence in AE CC (v.12.2.1.5), I select an image, then check the 'JPEG Sequence'. Sometimes I have folders that contain missing files, in that I case I also check 'Force Alphabetical Order'.
 
However, it seems that this is not working correctly now. Some part of the sequence is correct, but there are also some images that appear at random places in the sequence. Is this a bug? What should I do to avoid this?

View 2 Replies View Related

Photoshop :: Multiple Selections To Multiple Layers Or Multiple Files With One Go?

May 26, 2013

how to convert multiple selections to multiple layers or multiple files with one go?

View 6 Replies View Related

Photoshop :: How To Keep Layers Effects When Merging Layers To Save TIFF

Oct 16, 2013

I am loosing all my layers effects when I merge all the layers together to save the image in the tif format!

View 2 Replies View Related

Photoshop :: Change The Order Of Layers

Oct 28, 2005

Change the order of layers I have created. So they sit on top of each other, in a different order.

View 8 Replies View Related

Photoshop :: Layers Stacking Order

May 26, 2008

applyng a layer and flattening. Now i really want to get over this hurdle so that i can save important images unflattened for further re-adjustment later.

I have browsed the web for two days and found nothing that helps me. The crux of the issue is that i get to a point where i have applied maybe three adjustment layers and then aaply say a sharpening layer only to find i cannot see its effect on the image due to its order in the stack.

View 2 Replies View Related

AutoCad 2D :: Layers Do Not Appear In Alphabetical Order

Sep 1, 2011

I have a quick question. When I use the layer control dropdown menu, the layers do not appear in alphabetical order like they do in Layer Manager.

Is there a way to fix this?

View 2 Replies View Related

Paint.NET :: Randomize Layers In Order

Aug 15, 2011

Well, I had need something that had put the layers in a random order.. I show a picture so ya see (each "big pixel" is a layer.Tried to make them look randomized, but it didn't went that well.

View 16 Replies View Related

AutoCAD 2010 :: Draw Order Using Layers

May 30, 2012

Is there are tool somewhere where you can make the draw order layer specific. I.e so we have a layer with a certain number of items on it that always appear above another layer with other types of items.

We tend to use leaders a fair bit and they often drop below some of our design elements, ideally we want them to be at the front & have to spend time bringing to front / sending to back etc.

View 2 Replies View Related

AutoCAD 2013 :: Set Display Order Of Layers

Aug 19, 2013

I can't find where to set the display order of layers. I have lines that display under a PDF underlay but I can't drag the layer above the others. They appear to be in alphabetical order, which, while frustrating, I can live with if AC will allow me to easily move layers around some other way.

View 7 Replies View Related

GIMP :: Unable To Change Order Of Layers

Nov 3, 2013

I have used Gimp for years and today I simply cannot move layers. In the layers dialog I usually drag the layers into the desired order but for no reason the layers simply float back to their original position. I have tried;

- Clean install of gimp
- Opening various gimp files (xcf)
- Creating new xcf files
The layers are not;
- Locked
- Floating

I have attached a video of the problem, which can also be viewed at;

[URL].......

View 3 Replies View Related

CorelDRAW Graphics Suite X6 :: Master Layers Order

Apr 21, 2012

I'm working on a book that has watermark on all pages and jpegs too of a4 size. Working in earlier version [x5], I used to overlap all the watermarks which was located in master layer. When I used to import a fresh jpeg on new pages, the watermark went below the jpegs. What i used to do was create a new master layer and then cut pasted the watermark in that layer, and the watermark came above the jpegs in the pages that were added later. In CorelDRAW x6 this i'm not able to do. 

The watermark remains bottom of the jpeg, no matter what i do. if i edit the same file in version X5, it works fine and then i get it into x6 and do rest of stuff it works fine. The watermark problem still exists.

Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM

View 5 Replies View Related

AutoCad 2D :: Layer Always In Front / On Top Of All Other Layers In Draw Order?

Sep 29, 2011

Is there anyway that I can assign a layer to be always in the front/on top of all other layers in draw order?

View 0 Replies View Related

AutoCAD 2013 :: Order A Drawing To Organise Certain Layers

Mar 15, 2013

I am currently trying to order a drawing to organise certain layers on top of the other, everyone within our team is having the same problem and are find the draw order command and the right click action very inconsistant - i was wondering if there was a better way to organise and control which layer sits infront of others for publishing, we have a number of view port templates that also dont have the same draw order as the model space.

View 3 Replies View Related

Illustrator :: Automatically Sorting Layers In Alphabetical Order?

May 31, 2013

I have an Illustrator document with 932 layers. I would like to automatically sort the layers in alphabetical order

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved