When I turn on "Ray Traced 3D" I get an error message. CS6 and CC. "Out of page mapped memory for ray trace tracer. Your project may exceed GPU limits. Try closing other applications. Try updating CUDA driver. (5070::2)"
I have 6 gigs VRAM and 32 gigs RAM.
The project is 1080 with one bitmap image a vector graphic and some type.
I bought hd radeon 7770 for video composition. But I am not able to find Ray-traced 3D , I could see only Advanced 3D renderer. Do you think the problem is with the GPU? And will it work with GTX 650 1GB? I built the comp just for video production. Here is my PC configuration
Processor: AMD FX 8320 3.5GHz
Motherboard: MSI 970a-G43
GPU: MSI HD Radeon 7770
RAM: 1 GB Corsair 1600 MHz
PSU: 550W
Just bought a MBP Retina. Maxed out with everything they've got there at Apple. Here's a screen shot of what my preferences look like. Two things stand out: 1. the GPU option says "unsupported" and 2. of the 2GB of Usable Memory, I only am using 732 mb. I had all applications closed and and no external harware plugged in. how I can use more of my memory?
View 3 Replies View RelatedAfter Effects CS6 is crashing when I change to Ray-traced 3D.I am building my first test 3D text. I have gotten to the end and changed to ray-traced and it keeps crashing. I set the quality to 48.
I have:
Windows 7
Quad core
16 GB Ram
ATI Radeon HD 4200 graphics card
Did i set the quality too high (48) ?Is my card insufficient ?Does my card have GNU ?Do I have any on board memory with this card ?
How can you mask Text that is a 3D layer, using Ray Traced 3D?
The mask function does not work when it is made into a 3D layer, in to add an Extrusion to it.
It works fine when it is not a 3D layer, or just in Classic 3D. What other ways might there be to acheive this?
After going through all the 5070 drama this problem still exists. Any 3D layer be it text or shape layer shows as a bounding box only (see below). There is no difference when I add any kind of light. CPU mode works fine albeit slow. I have reinstalled AFX twice and tried various different drivers only to end up with the same result. Layers do, however show in Fast Draft but I am still unable to render using the GPU.
After Effects: 11.0.2.11
OSX 10.8.3
Fast Draft:Available Texture Memory:256.00 MBRay-tracing:GPU
OpenGL Vendor:ATI Technologies Inc.Device:ATI Radeon HD 4870 OpenGL EngineVersion:2.1 ATI-8.10.44Total Memory:512.00 MBShader Model:-CUDA Driver Version:5.0Devices:1 (Quadro 4000)Current Usable Memory:1.96 GB (at application launch)Maximum Usable Memory:2.00 GB
I'm coming into my second week of desperate attempts to make my After Effects CS6 (Volume License) work in the cursed Mac OS 10.9. I'm back to using CS5.5 which works, but my clients are getting irritated by having to down-save all documents to CS5.5 for me.
– I've installed CS6 OK.
– I'm trying to patch it to 11.0.4, message keeps saying "Adobe Application Manager is damaged or missing, please reinstall"
– I've tried loads of ways to remedy this; CC cleaner, surgical removal and reinstallation of all Adobe files in various order, silent installs, all kinds of permissions repairs and adjustments, reinstalling AAM, installing AAM for volume licensing, studying the PDApp.log, install and crash logs,
I've considered wiping my entire system and trying to downgrade to Mac OS 10.8 in order to get my CS6 back up and running
I currently have X4 Ultimate installed with KPT Effects & Nik Color Effex Pro 3. I now also have X5 Ultimate installed. Now X5 came with the same Nik Color Effex but I haven't installed it yet.Does KPT Effects from X4 will work in X5? Can I copy the folder from X4 into X5? (Same question pertains to the NIk Color Effex. Useful to install it again when it's already intalled to get it working in X5.)
I thought about just trying to point X5 to the X4 plugin folder but after just trying that with something else, I'm a little leary. I tried to point X5 to the Photoshop CS6 folder where AlienSkin Eye Candy 6 installed. But right after doing that and re-starting PSP, the startup box hung. I used task manager to stop it but the program still opened anyway. I knew that wasn't right, so I removed the link to that folder and X5 opened normally again. The newest installer for Eye Candy 6 won't let me do a custom install. So, how to get the filter working in X5.
Anyway, my main question is if I can get the KPT effects from X4 working in X5 and if so what I need to do.
When im tray to input some jpg resolution about 1200x720 that resolution doesn't work. and my resolution after import is 245x100.Downloading file of jpg image is 1200x720..when i'm import that resolution change in 280x100.
View 3 Replies View RelatedI installed After Effects pretty much without changing anything, so the settings are more or less default. I'm using a Macbook Pro with OS 10.6.8 and After Effects CS6
I have enabled media and disk cache, max disc cache is at 100GB and I have an external drive (with 900GB spare) as the volume selected beneath that option. My internal SSD has not much spare on it. I previously had the internal SSD as the disc cache and still had this same problem.
My project is 1920 x 1080 25fps - And I'm trying to render to Quicktime. I've tried rendering to stills and then outputting to Quicktime (so as to have less computational effort), then running them through but the same problem persists.
If After Effects is the application in focus the project renders fine.
If After Effects is not the application in focus - ie. I work with it rendering in the background, the 'FINISHED' sound plays and the render is cut short a short while after I started working in another program.
The project render time is about an hour, so it's not really convenient.
I just installed photoshop and can't get "filter" for lighting effects to work?
View 2 Replies View RelatedI'm currently using Pro X4.
I would like to know how to use a Transition without it affecting all tracks above it?
For example, if you apply a crossfade transition to a title track to make it fade-in, it will also affect the video track(s) above. The videotrack will suddenly turn black and then fade in together with the title.
Actually it will affect every track above the transition effect. So if you use for example the 'Switch Off' transition on the 2nd title track, it will also switch off the 1st title track, any possible overlay tracks and the main video track.
I can't imagine this should be happening. Is it a bug on my computer or is it a software issue
I'm using a single file on a server that I need two animators to be ablt to work from. Can I do this with having each animator have to work from a separate file?
View 1 Replies View RelatedI was editing a video an while playing with the scale I went to RAM preview and it wouldn't work so I closed it down and reopened it as this problem has happened a few times and this has been the fix. I then went to RAM preview from the beggining and my computer crashed, no bluescreen the monitors just went blank and the BIOS popped up. I then reopened my project and RAM previewed from the beggining and it didn't start it just said requesting frame 2 of ... I then played with a few of the prefrences eg. clearing the cache and purging memory and It still didn't work. I then disabled multiprocessing and RAM previewing worked again though I would like multiprocessing to work as It is alot faster. I then tried restarting my computer and reinstalling AE but still no luck.Also rendering does not work either with multiprocessing enabled.
Specs: i7 4770k @ 4.4Ghz
G.skill Ripjawz Z 32GB @ 2133Mhz
GTX 780
Samsung 840 pro SSD
Seagate Barracuda 2TB HD
I tried both the horizontal and vertical types - followed all of the (very limited) instructions to no avail.Cleaned up temp files.Installed SP2.
View 6 Replies View RelatedI have a problem with previewing effects in Illustrator. When I do this:
- create or select object
- go to appearance panel
- choose FX -> Stylize -> Drop shadow...
- check Preview in the effects window (it works as expected)
- now uncheck the Preview checkbox (when unchecked, the fx is still visible)
So, unchecking this Preview checkbox doesn't work right. It is very annoying. It is broken for most of the effect in illustrator. Strangly, it works fine with rounded corners effect. But other effects... not.
I just began editing a portrait shoot and realized that my paintbrush effects only work on about the bottom 1/3rd of my photo.
The little target with the plus sign in the middle shows up when I mouse over this photo from the mouth down, but when I mouse over the top part it turns back into the normal cursor. If I start using the brush at the bottom of the photo where the target/plus sign actually shows up and then drag it to the forehead, it works. But if i unclick at all it goes back to the original problem.
I am using Lightroom 4.
Just download After Effects CC to my desktop and once I opened the program it told me that I didn't have Verdana and the interface wouldn't work without it. It also said that I could replace the font but didn't give me any option and continued by crashing.
View 2 Replies View RelatedTrying to use the video copilot twitch plugin on a lower third. I created a really basic lower third by creating a solid and a text layer then precomposed them and copied all atributes to new comp. I then created a new adjustment layer for just the new comp and applied the twitch effect to it and my comp went black. If the twitch effect is only applied to the text layer or the base layer I want my lower third to appear on it works fine but when I apply it to just the precomposed lower third the whole thing goes black. I'm running CS6 on mac 10.7.5. I'm hoping that this is just caused by something that needs to be toggled but I've spent the last 30 minutes fiddleing around and I cant get it to work on the whole thing.
Edit: Toggling continuous rasterization makes it work on the text but not the solid.
I tried to run the After Effects CC 12.0.1 patch as After Effects CC will not launch after updating to Mac OS 10.9 Mavericks.
I get the following error:
After Effects CC (12.0.1) bug-fix update
Update is not applicable. Error Code: U44M2P28
I have read elsewhere that the patch may not work on trial versions...I am technically on a 12 month free trial for attending Adobe Max.
I have an iMac computer with Norwegian Keyboard.
I cannot get the left and right bracket to work - so maybe it is some other keyboard command I have to do to make it work?
when I want to add time to the time display, to re-position the timeline cursor, i use +15 for example. But when i want to subtract time, -15 wouldn't work. How does subtracting frames in the time display work ?
View 2 Replies View RelatedI'm having a problem with the 3D functions in my recent project. (note: only in this particular project!)
When putting the 3D tick on any layer, all the other layers in the composition just turn invisible and the background is set to black. However, the little eye which handles the visibility of a layer is still set to visible.
In addition, the X and Y Rotation has lost it's functionality. The object is not rotated but more or less compressed, which looks like a bad imitation of a 3D rotation. I'll better show you.
I want to fade a text layer with bevel, gradient overlay, and stroke, and mask only seems to fade the gradient, not the original text color, so it doesn't blend with the bg. I can't use gradient overlay for fade either because I'm already using it and it won't fade the stroke anyway.
View 1 Replies View RelatedI am modelling a livingroom and I am using Daylight system and mental ray renderer and that all works ok.
But when I want to add standard lights, with ray traced shadows, I can place them as usual in the scene but it doesnt illuminate the scene at all, no matter how high multiplier.. Not in the model nor in the renders.
I also ticked enable hardware shading, enable shadows and enable ambient occlusion.
I imported the scanned image to illustrator and then used object->image tracer and converted it to a vector graphic with area fill and no stroke. So far so good.
I now want to erase little mistakes in the drawing, that look like this
if I use the eraser, this happens:
so the path is weirdly bend around the stroke of the eraser, which obviously isn't what I wanted to achieve. In all the videos I watched about the eraser, it worked fine and if I just create an area with the blob brush and erase a part of that, that works fine as well. What's so different with the traced image?
When I trace an image in CorelDRAW (v15), I get of course a banding of colors, but unfortunately the regions with different colors are displayed with very thin white lines as borders. This look is retained when published to pdf. How can I get rid of these white borders?
I attach a photo for you to see ...
I am trying to make a crack wall texture effect on some text in illustrator cs6.
I have some crack texture photoshop brushes I really like, so I brushed on a blank psd canvas and saved it to PNG with transparent background.
I placed that in illustrator and image traced it so that it would create the paths for the cracked effect, but I can't seem to get it to make the paths for me.
I'm trying to do this so I can use the outlined brushes to erase the text layer with the traced crack png, removing the proper paths from the text layer so the text layer is now transparent where those cracks are.
Its bounded box but its this box that takes up center of my image and it ruins the entire image.I don't know how to make it go away.I have unselected things anything in window that might be related but it still not working.I am using the creative cloud version of Illustrator on computer os window 7
View 9 Replies View RelatedCan history be traced or viewed after saving the file?
View 9 Replies View RelatedI want to take the traced star (and maybe the text) to use in a video project. I need to make individual objects that I can fill and animate in AE or Premiere. Is Illustrator the right app to use? And where is a tutorial on how this is done?
View 1 Replies View Related