After Effects CS6 is crashing when I change to Ray-traced 3D.I am building my first test 3D text. I have gotten to the end and changed to ray-traced and it keeps crashing. I set the quality to 48.
I have:
Windows 7
Quad core
16 GB Ram
ATI Radeon HD 4200 graphics card
Did i set the quality too high (48) ?Is my card insufficient ?Does my card have GNU ?Do I have any on board memory with this card ?
I bought hd radeon 7770 for video composition. But I am not able to find Ray-traced 3D , I could see only Advanced 3D renderer. Do you think the problem is with the GPU? And will it work with GTX 650 1GB? I built the comp just for video production. Here is my PC configuration
Processor: AMD FX 8320 3.5GHz
Motherboard: MSI 970a-G43
GPU: MSI HD Radeon 7770
RAM: 1 GB Corsair 1600 MHz
PSU: 550W
When I turn on "Ray Traced 3D" I get an error message. CS6 and CC. "Out of page mapped memory for ray trace tracer. Your project may exceed GPU limits. Try closing other applications. Try updating CUDA driver. (5070::2)"
I have 6 gigs VRAM and 32 gigs RAM.
The project is 1080 with one bitmap image a vector graphic and some type.
Just bought a MBP Retina. Maxed out with everything they've got there at Apple. Here's a screen shot of what my preferences look like. Two things stand out: 1. the GPU option says "unsupported" and 2. of the 2GB of Usable Memory, I only am using 732 mb. I had all applications closed and and no external harware plugged in. how I can use more of my memory?
View 3 Replies View RelatedHow can you mask Text that is a 3D layer, using Ray Traced 3D?
The mask function does not work when it is made into a 3D layer, in to add an Extrusion to it.
It works fine when it is not a 3D layer, or just in Classic 3D. What other ways might there be to acheive this?
After going through all the 5070 drama this problem still exists. Any 3D layer be it text or shape layer shows as a bounding box only (see below). There is no difference when I add any kind of light. CPU mode works fine albeit slow. I have reinstalled AFX twice and tried various different drivers only to end up with the same result. Layers do, however show in Fast Draft but I am still unable to render using the GPU.
After Effects: 11.0.2.11
OSX 10.8.3
Fast Draft:Available Texture Memory:256.00 MBRay-tracing:GPU
OpenGL Vendor:ATI Technologies Inc.Device:ATI Radeon HD 4870 OpenGL EngineVersion:2.1 ATI-8.10.44Total Memory:512.00 MBShader Model:-CUDA Driver Version:5.0Devices:1 (Quadro 4000)Current Usable Memory:1.96 GB (at application launch)Maximum Usable Memory:2.00 GB
Specifically the Boris Continuum plugins. I get this error:
Seems to happen for really no reason, even if I apply the effect and let the comp sit idle, it hapens after a minute or so.
Win 7x64, AE CS6 11.04, 16 gb of RAM GPU: GeForce GTX560ti
Why does my after effects CS5 x86 crash when it exports the file?is it to large? or is it a ram thing??
View 2 Replies View RelatedWhen I tray yo open a After Effects file in a Mac Pro 2013 with Mac OS X 10.8.5 the program shows the AE Suicide after indicate a font problem.
In other Mac Pro with Mac OS X 10.6.8 and the same version of After Effects CS5.0 there are not problems.
I need to work with Mac OS X 10.8.5 .
I have project im working for 2 weeks. It was all good till yesterday. Today I opened and tried to Ram preview it, but either it crash and close or if I click the space bar to watch in the midle of ram preview it opens a warning window, with nothing inside (see attach) and I can not close it or do anything else.
Im running a Windows 8 in a IntelCore i7 4770 3.4GHz 3.4GHz, RAM installed 16GB - Video - NVIDIA GFORCE GTX 660
I just can not work this way, I need to finish this program and I can not find a good explanation for this crashes.
CS6-64bit lighting effects crashing my computer 30 to 50 second into using. Strange digital artifacts following the cursor before crashing. I have plenty of RAM-8 gigs. It worked ok the first few times using.
I'm using windows 7 on a Asus I7 laptop with ATI Radeon graphics. plenty powerful. Is there an a adobe down load fix for this problem?
I get the following crash meassage on booting AE 12.1 from Mavericks
I have re-installed & trashed Prefs.
When I open a JPEG file from my mark iii into CS6, I try to start a new layer and then add the lighting effects filter. CS6 crashes (the little effects comes up on the screen and the little blue circle goes round and round). Nothing happens, but if I check task manager it says photoshop is not running.
I have windows, 16GB ram, and am using a small percent of my memory.
How do I see if I need to update my video card and how do I do that?
The lighting effects classic plugin from the optional downloads page crashes both the 32 and 64 bit versions of photoshop cc (version 14) on a windows 7 x64 system when invoked from Filter>Render>Lighting Effects Classic.
[URL]
I didn't have any problems with transition effect, but suddenly,some effects, like flip album and the ProDad plugin are causing VS to hang and not respond: flip album is causing the hang just after the automatic preview (can't turn this off) and just clicking on the ProDad plugin is freezing VS. They are also causing the rendering process to hang (turned off smart rendering as well).I've reinstalled the software wituhout SP2 and still the problem persists.No matter what kind of media I insert before or after the transitions, the problem is the same.I assume there is some kind of incompatibilty between VS and some OS/driver update - any way to know for sure?
View 14 Replies View RelatedI have a Early 2013 Macbook Pro, CS5.5, Pixel Bender, and just downloaded Droste.
When Droste is chosen : immediately the CS5.5 shuts down with an error message,happened in both PS and AE. The error message is "bad access" and "kern invalid address"
( i tried a couple other plugins, same crash, same error message )
Not sure if it's just the Puppet tool alone as I have used it many times on various layers and sizes within a comp with no problems. Have a character, used the pins on both legs, arms, and various strands of hair - no problem. It's when I try and place a puppet pin on the body of the character, AE crashes and gives me that error message. Used the puppet tool on larger projects before - have more than enough power and memory. It's a PS file, so why would it crash every time I want to place a pin on the body portion only? I've even scrapped the composition, started with the body portion instead of legs, etc and still, it crashes.
View 1 Replies View RelatedI am modelling a livingroom and I am using Daylight system and mental ray renderer and that all works ok.
But when I want to add standard lights, with ray traced shadows, I can place them as usual in the scene but it doesnt illuminate the scene at all, no matter how high multiplier.. Not in the model nor in the renders.
I also ticked enable hardware shading, enable shadows and enable ambient occlusion.
I imported the scanned image to illustrator and then used object->image tracer and converted it to a vector graphic with area fill and no stroke. So far so good.
I now want to erase little mistakes in the drawing, that look like this
if I use the eraser, this happens:
so the path is weirdly bend around the stroke of the eraser, which obviously isn't what I wanted to achieve. In all the videos I watched about the eraser, it worked fine and if I just create an area with the blob brush and erase a part of that, that works fine as well. What's so different with the traced image?
When I trace an image in CorelDRAW (v15), I get of course a banding of colors, but unfortunately the regions with different colors are displayed with very thin white lines as borders. This look is retained when published to pdf. How can I get rid of these white borders?
I attach a photo for you to see ...
I am trying to make a crack wall texture effect on some text in illustrator cs6.
I have some crack texture photoshop brushes I really like, so I brushed on a blank psd canvas and saved it to PNG with transparent background.
I placed that in illustrator and image traced it so that it would create the paths for the cracked effect, but I can't seem to get it to make the paths for me.
I'm trying to do this so I can use the outlined brushes to erase the text layer with the traced crack png, removing the proper paths from the text layer so the text layer is now transparent where those cracks are.
Its bounded box but its this box that takes up center of my image and it ruins the entire image.I don't know how to make it go away.I have unselected things anything in window that might be related but it still not working.I am using the creative cloud version of Illustrator on computer os window 7
View 9 Replies View RelatedCan history be traced or viewed after saving the file?
View 9 Replies View RelatedI want to take the traced star (and maybe the text) to use in a video project. I need to make individual objects that I can fill and animate in AE or Premiere. Is Illustrator the right app to use? And where is a tutorial on how this is done?
View 1 Replies View RelatedIs it possible to remove the traced image yet still retain all of the vector art?
View 4 Replies View RelatedI want to remove color from images to prepare them for being autotraced in AI.
Is there an advantage to using Image > Mode > Grayscale vs. Image>Adjustments>desaturate vs. Image>Adjustments>hue saturation and dropping down the saturation vs.
Image>Adjustments>Threshold for this purpose?
Do these all generally do the same thing, or would one of these result in a better job of turning my image to black and white with higher contrast?
Just wants to get some simple "animated words" traced with a white background (instead of the background being "dimmed" looseleaf paper)
To explain, here's a comparison example of what I'm trying to achieve:
Imagine the phrase:
EGG-CELERATING THE PACE OF FERTILITY
Where the letter E is:
The vertical part of the E is a stalk of Celery
The horizontals of the E are cartons of Eggs.
Where the "P" of Pace looks like a basic line drawing of a "pacing shoe"
...with perhaps "anxious" looking eyes drawn inside the shoe
...yet still look like a P
...and the remainder is [roughly] like my attached letters on Dim looseleaf background. (see attached)
How would you achieve the EGG-CELERATING phrase? I bet an expert could achieve this within 1/2 hour or less, can't they? So I'm trying to achieve the same as the above:
...albeit it's a different phrase, and different BASIC pics.
...in other words, it's mostly outlined-alphabet, but including 4 basic pictorial-letters, and some more letters containing "eyes"
P.S. Regarding the attachment, note that I placed that in a Layer which I called Layer1
Then tried selecting it & changing background to White But was unsucessful.
Is it possible to change the black fill color on an image that has been traced using the silhouette option?
View 2 Replies View RelatedI have traced an image and expanded it. I'm now trying to add the scribble effect to it but it does not work. I assume it's because it's not an object but I'm new to illustrator so I'm not sure.
The image is here: [URL] ....
I basically want to add texture to the black eagle only.
Cupcake Teddy.cdr
I have traced this image from a Jpeg into a Vector to colour but how can I change the black out lines into other colours. When I right click the mouse with an outline selected the colour appears around the line but there is still a fine black line in the centre of it. I want to change the actual outline into another colour
After using Powertrace to trace a bitmap, I zoom in to the outline and can only see one line.
However when I export as a DXF, my cam program always says it is removing overlapping outlines. Thing is there are quite a few double outlines left (very close to each other but not exactly parallel). Because these remaining outlines did not cross, my cam program did not remove them.
Because of the remaining double outlines, the cam program basically doubles up on the cut path.
If I trace manually with the bezier tool and shape tool, I don't have this problem. It's only when tracing with Powertrace.