When I tray yo open a After Effects file in a Mac Pro 2013 with Mac OS X 10.8.5 the program shows the AE Suicide after indicate a font problem.
In other Mac Pro with Mac OS X 10.6.8 and the same version of After Effects CS5.0 there are not problems.
I need to work with Mac OS X 10.8.5 .
Specifically the Boris Continuum plugins. I get this error:
Seems to happen for really no reason, even if I apply the effect and let the comp sit idle, it hapens after a minute or so.
Win 7x64, AE CS6 11.04, 16 gb of RAM GPU: GeForce GTX560ti
Why does my after effects CS5 x86 crash when it exports the file?is it to large? or is it a ram thing??
View 2 Replies View RelatedI have project im working for 2 weeks. It was all good till yesterday. Today I opened and tried to Ram preview it, but either it crash and close or if I click the space bar to watch in the midle of ram preview it opens a warning window, with nothing inside (see attach) and I can not close it or do anything else.
Im running a Windows 8 in a IntelCore i7 4770 3.4GHz 3.4GHz, RAM installed 16GB - Video - NVIDIA GFORCE GTX 660
I just can not work this way, I need to finish this program and I can not find a good explanation for this crashes.
CS6-64bit lighting effects crashing my computer 30 to 50 second into using. Strange digital artifacts following the cursor before crashing. I have plenty of RAM-8 gigs. It worked ok the first few times using.
I'm using windows 7 on a Asus I7 laptop with ATI Radeon graphics. plenty powerful. Is there an a adobe down load fix for this problem?
After Effects CS6 is crashing when I change to Ray-traced 3D.I am building my first test 3D text. I have gotten to the end and changed to ray-traced and it keeps crashing. I set the quality to 48.
I have:
Windows 7
Quad core
16 GB Ram
ATI Radeon HD 4200 graphics card
Did i set the quality too high (48) ?Is my card insufficient ?Does my card have GNU ?Do I have any on board memory with this card ?
I get the following crash meassage on booting AE 12.1 from Mavericks
I have re-installed & trashed Prefs.
When I open a JPEG file from my mark iii into CS6, I try to start a new layer and then add the lighting effects filter. CS6 crashes (the little effects comes up on the screen and the little blue circle goes round and round). Nothing happens, but if I check task manager it says photoshop is not running.
I have windows, 16GB ram, and am using a small percent of my memory.
How do I see if I need to update my video card and how do I do that?
The lighting effects classic plugin from the optional downloads page crashes both the 32 and 64 bit versions of photoshop cc (version 14) on a windows 7 x64 system when invoked from Filter>Render>Lighting Effects Classic.
[URL]
I didn't have any problems with transition effect, but suddenly,some effects, like flip album and the ProDad plugin are causing VS to hang and not respond: flip album is causing the hang just after the automatic preview (can't turn this off) and just clicking on the ProDad plugin is freezing VS. They are also causing the rendering process to hang (turned off smart rendering as well).I've reinstalled the software wituhout SP2 and still the problem persists.No matter what kind of media I insert before or after the transitions, the problem is the same.I assume there is some kind of incompatibilty between VS and some OS/driver update - any way to know for sure?
View 14 Replies View RelatedI have a Early 2013 Macbook Pro, CS5.5, Pixel Bender, and just downloaded Droste.
When Droste is chosen : immediately the CS5.5 shuts down with an error message,happened in both PS and AE. The error message is "bad access" and "kern invalid address"
( i tried a couple other plugins, same crash, same error message )
Not sure if it's just the Puppet tool alone as I have used it many times on various layers and sizes within a comp with no problems. Have a character, used the pins on both legs, arms, and various strands of hair - no problem. It's when I try and place a puppet pin on the body of the character, AE crashes and gives me that error message. Used the puppet tool on larger projects before - have more than enough power and memory. It's a PS file, so why would it crash every time I want to place a pin on the body portion only? I've even scrapped the composition, started with the body portion instead of legs, etc and still, it crashes.
View 1 Replies View RelatedTrying to edit text in Photoshop CS3 file causes a crash - Tried on multiple PC's.File originally created in Photoshop CS6 with "Maximise PSD/PSB File Compatibility" set at "Always".
Document size A4, using Arial Regular. RGB. 8Bits. 72dpi
Colour Profile: sRGB IEC61966
Multi business licence for CS3 and CS6 Design Standard/Premium/Master Collection all on PC
I have created keyframes from audio file and used them to generate some effect, all works fine, it is amazing how easy it is However, I would like to generate flash (?) so that these effects would be dynamic to different audio files after export.
What I want is basically to create effects that can be used in life event to the streaming music.
I had spent my artwork for many days with so many effort and time, and it has been corrupted after a computer crash (not PSD crash). I am using Windows 7.
-What happened after: 1 black layer (around 59 MB)
-What happened before: Had multiple saves, 15+ layers (so why it is not back to the latest save?)
I tried: Previews in PSD, Bridge, using recovery programs (none worked), hex editor, searched for temp./restore previous version files (none) how to recover this file.
Why does Photoshop cs4 crash when opening a file? (Mac OS 10.6.8) I've rebuilt pref.'s and reinstalled Photoshop with no positive results. I can create a new file but cannot "place" anything because that crashes as well.
View 26 Replies View Relatedi first creat mp4 file with "upload to web" 1280-720.now i want to make a dvd with this file . i press share-creat disc-dvd and when the file insert the vs4 crash. i record it here [URL]
View 3 Replies View RelatedPhotoshop crashes when opening a file.
View 3 Replies View RelatedWhile working on a drawing the file would not save (message - failed to save), then Xara DP7 crashed. The file disapeared from my hard drive. I restored the file with a utility. Now when I try to open file it says - Failed to read XAR file, Failed to read record buffer.
View 4 Replies View RelatedI run Illustrator CS6 on windows 7. Every time I try to start a new file or try to open a existing file the program crashes.
View 4 Replies View RelatedI'm on Adobe Creative Cloud, and I recently installed Photoshop CC.
N01 problem:
It planted at various times on different files. But the big problem of the crash while recording that is created 0ko tmp file is unusable. And can not find a trace of my PSD was yet already registered.I do not remember this problem was present on the CS6, and frankly it's boring, because I lost all my work wanting tt simply record.
N02 problem:
Other problems also on CC, when opening a file CS6 on a form, direct selection tool is impossible to use it does not select the form ... forced to spend a strange manipulation page, you must click on the shape tool, click on the layer in question and re click on direct selection tool. a series of strange actions ... whereas before it worked very well.A contratio if the form was created directly in CC no worries direct selection.
when i want to create video file in pro x4 the program crash, i reanstall the program and i stiil have the same problem.
View 3 Replies View RelatedWhen I save a file as a v2000 file from v 2007, the file scans to 31% then the computer chokes. This acts exactly the same in another computer. I need to do this sometimes because the person that I am sending the file to has v 2000 only.
View 1 Replies View RelatedI was working on setup up several camera animations in a file. I saved the file, and put the settings in for all 4 cameras to render. I started Batch Render running, it saved, began rendering the first frame and then Maya crashed. It was able to save a .mb version as it was closing. I have since been unable to get either file to open correctly.
If I try to directly open the files, they load 100%, the status bar immediately switches to "Writing <username>.20110503.<time>.ma" and the Crash Reporter appears before the viewport can even update and show the model.
If I try importing either file into a new document, it will load completely, and a dialog window pops up with: Could not save file"/var/folders/FL/FLo7J2o4H4OV9SDiREDU4U+++TI/-Tmp-/thompirson.20110503.1216.ma".
If you click OK, Maya crashes without the Crash Reporter opening.
since some weeks i have a real curious bug in 3dsmax.With less words: Everytime i want to open a File Dialog Window in 3dsmax it crashes directly after the mouse click without any warning. It is like something has killed my 3dsmax.exe process.In other words: I can't work anymore. Some examples for the File window are:
File --> Open
File --> Save as
MAXScript --> Run Script
and so on...
The only way i can save my MaxFile is to overwrite my existing File by pressing "CTRL+S"..Another curious thing is, that it seems to happen with random max files. If i work on a new scene everything is perfect, but after a week this problem happens with this scene too.First i thought that this problem occurs only on my computer, but yesterday another worker of our company had the same issue on a max file, which i have never seen before.Both of us haven't installed any software the last weeks.Another idea was, that we have a new windows hotfix, which occurs this issue, but all of our other machines are up to date too.
I have problems loading a max file. The file has several containers with external content, and it started crashing on load after I created those containers.
I tried merging the file into an empty scene, and it works if I merge everything but the containers. I also tried merging the containers alone, and that makes it crash.
I need/want to use containers, because the scene is very big, and can be quite challenging to handle. I could try using X-refs instead, but I was hoping to use containers, since it seems like a good solution in theory at least!
Photoshop CS6 and Illustrator CS6 crash unexpectedly when trying to open a file. I'm on OSX 10.6.8. I installed the software through Creative Cloud. I tried deleting preferences and it still doesn't work. Here is the error details.
Process: Adobe Photoshop CS6 [254]
Path: /Applications/Adobe Photoshop CS6/Adobe Photoshop CS6.app/Contents/MacOS/Adobe Photoshop CS6
Identifier: com.adobe.Photoshop
Version: 13.0.0 (20120315.r.428)
Code Type: X86-64 (Native)
Parent Process: launchd [96]
[code]....
I tried to provide as much information in the subject line as possible. I have been keeping my VS installations up to date and so I have VS X6 installed on Windows 8.1. I just purchased a new Sony HDR-CX290 camcorder. I have transferred 3 or 4 video files from the camera to my computer using the Sony transfer software which saves it as a *.m2ts file. VS X6 can open the files, I can place it in my timeline. I can run the split by scene and other edit utilities. I even have gone through the process to test and create a disc without any issue. However, if I try to PLAY the clip in the project window, VS x6 crashes. I have uninstalled, rebooted, and reinstalled VS x6. I have tried reinstalling codecs. The files play without any issue in Nero and Windows Media player. Windows Movie Maker seems to open the files without issues as well. However, I have had my system to make discs via VS for a while now so I would prefer to not have to use a different program. Especially since I have invested in VS x6. I am outside my warranty window so from the sounds of it, I have no recourse to let Corel know if this is a bug or a known issue. I have installed VS X6 SP1 as well and it hasn't fixed the issue.
View 9 Replies View RelatedHad a system crash. I had Norton 360 using a slave HD as my automatic backup source. To reinstall windows, master HD was overwritten. I thenfound out Norton 360 didn't save my autocad files to the slave HD. Their definition of "other files" didn't cover dwg files unless you did an extremely detailed setup process, which, was not in the Norton instructions. Anyways, local computer service was able to recover about 60% of the "lost" autocad files.
Of those recovered files, about 60% will not open up. Only get a message "not a valid file" The file details show its an autocad file, its size, and the last date of revison.
I've acquired the Corel Video Studio Pro x4 recently, and across an unplesant problem shortly after instalation. The "create video file" makes the program crash every time i press it.
View 3 Replies View RelatedI have an SAT file that I inserted into a Conceptual Mass Family and then loaded into a Revit project. I have changed the name of the object in the Object Styles/Imported Objects dialog and assigned a unique material to it as well.
When I load it into the project its generally fine, sections/plans/elevations/section boxes work fine. When I try to update the material settings or the material it retains the original material settings. After the second attempt at assigning a new material: Crash Error Unexpected something or other Shut down.
I opened the original Mass famiily and updated the material shading once and it worked fine. I did it again and: Crash Error Unexpected something or other Shut down.
This is not my first time to use this process. Probably the fiftieth time. However it is the first time I've used it in 2014 with the new(really old) improved (fixed) materials dialog.
Is there a bug or known issue in 14 vs. 13. Am I missing a hotfix? It works on 13.
