3ds Max :: One Model Persists In Being Grey In Viewport
Apr 18, 2012
I have a scene, and the textures are all displaying fine, except the one on the main model. I must have pressed something, as the rest are displaying properly. Ive been using this for 4 years and have never seen this problem. It's not frozen or anything, so im baffled. (Screenshots below). Even tried importing and exporting, no luck. Don't think the file is corrupt.
(Should probably mention, the model is rigged, but I have deleted the entire stack and it's still grey).
View 4 Replies
ADVERTISEMENT
Feb 11, 2012
My setup:
AMD Phenom 9550
4GB DDR2 RAM
AMD Radeon HD4850 512MB
I sometimes have the problem(mostly when I work with a lot of files[10 to 15] or if I work with big files) that my viewport goes grey(so I can't see anything anymore). This happens when I use the type tool or when I use the transform tool. When I go out of the editing mode, everything is visible again.
My settings:[URL].....
The drivers of my graphics card are up-to-date(Catalyst 12.1). The version of Photoshop that I work with is Photoshop CS5.1 Extended.
I didn't have this issue a couple of years ago(when I still worked with CS3, CS4, CS5).
I've googled this issue and only found people having problems with older drivers(Catalyst 11.3).
View 4 Replies
View Related
Nov 20, 2012
I just got back from maternity leave and I left work at Autocad 2011 and came back on Autocad 2013. I work thru my viewports in my model space, and I've noticed that when I pan and zoom in or out or move to quickly from one point to another (didn't notice which) my model space swaps to paper even if I'm in a command. Is this something I can deactivate?
View 3 Replies
View Related
Feb 21, 2011
I then change to my A0 template on a different tab in the same drawing, size up the model in model space within the viewport (everything still fine), then as soon as I scale the model to 1:200 the icons I've added to the drawing (I say icon it's one particular group of icons - CCTV camera icons I've made and added) suddenly become massive and three times the size.
If I add them when already at 1:200 they're fine but it only seems to do this when I actually scale the drawing.
View 6 Replies
View Related
Jul 9, 2012
WHAT I DID: I downloaded AutoCAD LT trial version and used it for about 2 weeks. I then purchased the actual product and installed the purchased AutoCAD LT 2012. I then uninstalled the trial version.
PROBLEM: The file extension that says Autodesk Trial Player is now attached to all of my CAD work instead of the standard .dwg extension. I can not import my CAD files into Sketch Up because of this.
This is installed on an HP g7 laptop purchased new in Feburary 2012.
View 1 Replies
View Related
Apr 20, 2011
I probably changed a setting in Maya 2010 and did not know the bigger implications. How to reset maya's viewport settings back to a normal state?? If I have to re-do any of my two plug-ins, that is ok. Last time I messed with maya it was version 5.
I have many, many models done in 3DS, Max and Blender that I am trying to convert over to Maya (my day job's 3D IDE).
I can view any maya (mb, ma) files with no problem. But today, I am having issues viewing results of simple 3DS imports in any viewport of maya.
The attatchments are of the same file (.3DS) being imported to blender3D and of Maya.
View 2 Replies
View Related
Jun 26, 2012
I was wondering if there was a way to see and adjust paperspace viewports in modelspace. By adjusting viewports in modelspace I would like to be able to adjust the size of my rectangular viewport in modelspace to encompass what I want, while keeping the viewport on paperspace the same size (to encompass the entire print page). I would like my modelspace viewport to simply adjust the zoom in and zoom out of my paperspace viewport.
Any better method than individually zooming in and zooming out and re-adjusting my paperspace viewport.
View 9 Replies
View Related
Nov 10, 2011
How to freeze a layer in model space but still be visible in a viewport.
The layer just gets in the way in my model, I could just turn it on whenever I need to print the page but surely theres an easier way.
View 1 Replies
View Related
Mar 19, 2012
I have a problem with a drawing when inserting a viewport. The drawing is from a client and on the model space the building appears to be in straight and looks correct. However when I go over to Pspace and insert a viewport the model is shown to be rotated at a crazy angle. How I can draw the viewport or change the setting so that it shows exactly how it is in model space.
View 2 Replies
View Related
Jul 9, 2012
Am using Autocad 2012 with SP2 downloaded, note the problem does not occur in Autocad 2013... So basically if you open the dwg you will see it opens in paperspace, the viewport is locked to a specific scale etc. Now go into model space where the dwg is, you should be able to zoom around, pan etc fine, problem is when you now go back into the layout or paperspace. You will notice that upon re-entering paperspace that the vport is highlighted, ie there is a thicker outline of the vport boundary, however am still in paperspace according to the tabs. When you now try zooming in or out using the mouse scroll you will notice an additional copy of the viewport is imprinted on the screen. Thats the problem. Doing a few undos will set you back right again.
So far we are inclined to think that its either something to do with the UCS or the units that the program is getting confused with but havent been able to find a solution. Also bear in mind that it seems to work fine in 2013. Its probably something really simple that we've missed but thought would try anyway Will attach the dwg file.
View 2 Replies
View Related
Nov 14, 2013
I imported a model into 3dsMax from Sketchup.
The model is a 5200 sf interior building space that I had applied materials & components to in Sketchup.
Now that I am working on the model in 3ds Max, I am having some issues with the application of materials to the objects. Basically, some of the objects kept some of the materials that I had applied in Sketchup; however, some of the materials did not come through into Max. When I try to remedy this and apply the correct materials to the object, it is linked/grouped to several other objects in the model that I do not want to apply the material to.
I have tried to make a copy of the material in the material editor and then reapply to the object, but it still applies it to several other unrelated objects.
Also, I seem to be having trouble with my zoom feature in the viewport....my zoom will sometimes work, but sometimes it will zoom all the way to extents of the model, and won't let me zoom back into the interior of the model space; I don't know if this problem is related to the previous issue.
View 1 Replies
View Related
Apr 17, 2013
I am running the antique CAD 2004 and went to layouts to start setting up a page. When I drew in the view port, it does not show anything of the model space, zero, zip, nada. Tried "Scale to fit", a new view port with no luck. I opened another project file, it work perfectly, just not this one. It doesn't have any Xref's that I can see, but it does have some proxy objects.
View 3 Replies
View Related
Jul 10, 2012
MEP 2013
Are there any commands other than DVIEW that allow you to rotate your model space ONLY in the active viewport?
View 9 Replies
View Related
May 23, 2012
how to make a 3D model visible in viewport layout?
View 4 Replies
View Related
Feb 10, 2012
i am haveing trouble with a viewport that is hiding everything that crosses the rectangular border. The viewport is acting just like a wipeout would. I got this drawing from a client and I can't figure out what is wrong with it. I checked to see if there was actually a frame with the viewport but when I select the viewport it only reads as one object.
View 6 Replies
View Related
Jul 18, 2011
I cannot get my dashed lines in my model space to show up dashed in my viewport.
I already tried MSLTSCALE = 1 in model space and PSLTSCALE = 1 and LTSCALE = 1 in paperspace.
it did not work.
View 9 Replies
View Related
Jun 8, 2007
I am working on a set of architectural drawings, and so far I got about 12 sheets (each sheet is on a paper space layout) of details. I am using AutoCad 2005LT. The text is in paper space and all the drawings in model space. I have to move some details from one layout to another. When I copy the viewport with text to different layout the items in model space don't show off . Is there a way to copy text in paper space along with detail in model space at the same time to a different layout?
View 6 Replies
View Related
Jun 14, 2013
I have three drawings in modelspace and three viewports in one layout (paperspace), I would like to select each modelspace drawing and assign it to each layout viewport.I'm using Visual Studio 2012, .NET Framework 3.5 and Csharp.
View 4 Replies
View Related
Aug 9, 2012
I use IN MODEL SPACE command:
view/ viewports/ two viewports (horizontal or vertical)
just ordinary split window in model space.
I found out that is missing line between viewports. I am looking in options but there is nothing.
Which command or system variable it is???
View 2 Replies
View Related
Mar 13, 2013
Details and sections signs in model/viewport modes,
In steel structure drawings, it is very common to have cross sections at particular locations as well as having details at specific joint.
I’m wondering if there is a way to have automation for
Having a sign (circular or rectangular) on the original drawing to show what each viewport represents on the model space (attached). This feature is already available (for example) in the ArcGIS software, i.e, each viewports is indicated by a sign on the original map to show where we are in that viewport
Having a cross section sign that represents at which location the cross section is taken (attached)
I’m not talking here about 3D model. All what I want is to show what each viewport represent on the mother drawing and also to show where the cross section is taken.
Attached screenshots
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 9 Replies
View Related
May 10, 2013
Is it possible to have model space geometry print through a watermark in the layout? My watermark consists of mtext with an arial font placed manually in the layout. It is on it's own layer which is set to print at Shade 40 (plot style tables). Draworder works with other layout objects but not the geometry from the model space viewport. My watermark covers the model space geometry so it is not visible when printed. Is this possible?
View 1 Replies
View Related
Apr 3, 2011
What i have is a low polymodel that's quite small in scale, i'm modelling around a higher poly model, when i zoom in, the viewport clipping kicks in and parts of the model disappear, so i cant work on the small details. What i need to do is scale up both my low poly and high poly, work on the small details and scale it back down.
In maya there are multiple solutions to this; The first and most obvious would be to increase the near clip in the camera attributes.
The second would be to freeze transformations on the low and high poly, scale up the model, work on it and then scale it back to the value of 1.
The third would be to put both the low and high poly models into a group, scale up the group, work on the model, return the group back to its default size and ungrouping. Personally i would use this method to preserve the original scale values on the low and high poly models.
Is there a way of doing any of the above in 3ds max?
View 2 Replies
View Related
Nov 11, 2012
We like to allow user to select a rectagular area in modal scpace. Then the code creates a paperscace viewport in a spcified layout. The viewport will show the selected area. find the old VBA code that achived this and the .net code I am trying with. .Net code always gives some exception.
VBA Code
'Lets find the center of the viewport in paperspace.
Dim center(0 To 2) As Double
center(0) = newWidth / 2
center(1) = newLength / 2
center(2) = 0
Dim lay As AcadLayout
For Each ent In ThisDrawing.layouts
[code].....
View 2 Replies
View Related
Sep 12, 2012
I've been runing LT 2013 for the past couple of months, everything was working fine until recently. Occasionally a viewport will go completely black. I can doule-click into model space and select objects, though I can't really see them. If I delete the viewport and make a new one, the new one works fine (at least for now).
View 4 Replies
View Related
Feb 19, 2013
I'm having a very annoying problem where the color and lineweight of my alignment in a viewport is not what it's set to be. I have an alignment with a style that sets all the linework components to a layer named C-STRM-CNTR-N, the color is set to BYLAYER, the linetype set to Continuous, and lineweight set to .80mm (see style_and_layer_screenshots.png). The layer C-STRM-CNTR-N has Cyan as the color, which shows in the Alignment Style dialog box (see style_and_layer_screenshots.png). In the model space everything looks fine (see c3d_model_space_screenshot.png). But in my layout, the alignment is a different color and lineweight (see c3d_layout_screenshot.png).
At first I thought maybe the alignment wasn't on the correct layer, but I checked and it's set correctly. Then I checked to see if the layer C-STRM-CNTR-N had a different color set for the viewport through the layer manager, but it's set to Cyan just like it's supposed to be. I went to the model space and noticed the color is correct. Frustrated and at a loss, I closed C3D, then reopened it and the problem is still there.
Why I can't change the lineweight nor the color of the alignment in this viewport? If I change either of those two settings in the Alignment Style Dialog box nothing changes, but the linetype does change.
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
View 3 Replies
View Related
May 9, 2012
Is there any way to copy a viewport that includes model space and paper space at the same time to another drawing?
View 5 Replies
View Related
Dec 27, 2012
can I alter the BACKGROUND COLOUR from the Grey to a lighter grey as in P/Shop Album 2.00 which is just what I want..I hate the darker colour as background..I have just purchased the Elements 11.
View 5 Replies
View Related
Oct 12, 2012
as a user of pse 6 I 'm used to work with darkgrey background in the organizer.
This works perfectly for quickly assessing brightness and contrast of pictures.
In pse 10 however I could not find any button to change the preset lightgrey background colour to darkgrey.
View 8 Replies
View Related
Jun 13, 2013
I am currently running Map 3D 2012 with CadWorx and I am having an issue with one of my multi tab drawings. Any object set to plot grey (any grey), that is in paper space, is plotting black only in one of my layouts. similar objects in model space and in both spaces on other layouts are all plotting accordingly.
View 0 Replies
View Related
Feb 10, 2004
I try to use the color grey its always redish grey and never grey.
I tried changing my color settings from photoshop but it still wont work.
View 1 Replies
View Related
Jan 5, 2009
What is the command to take a paper space object and send it through the viewport into model space (without copy and paste)?
View 8 Replies
View Related
