I mirrored a box using mirror tool, volume value of mirrored object is negative,-0,25 cum. However when I used mirror modifier it is positive.Screenshot image is attached.
View 1 RepliesCorel Draw X4 and CS3 package. Im pretty familiar with X4 as Iv been using Corel for a long time, but never done this particular thing before...
wanting to do is put a mirror or reflection underneath my object
I wanted to start learning how to use 3DSMax by first making a sword model that could later be used for a game like Skyrim. But rather than making some simplistic, blocky sword, I wanted to jump to something more complicated to speed up the learning curve.
I was editing existing models in Blender before, so I already know more or less how to operate a program like this, and everything else can be covered with tutorials. But there's one thing I can't find a tutorial for...
Let me explain it on an example. I want to make a model of this sword:
[URL]
The idea is that it's symmetrical and identical on both sides. I saw somewhere a video where a guy was somehow creating a model, and while he was working on one half, the other half was automatically updating and creating a perfectly symmetrical shape.
For this sword, I would be basically making only 1/4 of the sword, while the rest would be appropriately placed mirrors. I want this process of mirroring to happen automatically. How do I do that?
Im trying to create a material for glass balustrade that will elevate and show outline but not block what is behind. Useful for shr screens (show tiling, taps etc) balustrade for balconies, stairs etc.
I have balustrade I'm working on now using a railing object. There are no posts at all and I'm using dynamic posts with a nothing material to cut up the guardrail material into pieces. So need the posts to disappear but stil cut the glass into sections. Also in elevation, need to see the glass outline but also to show what's behind. Normal glass in elevation rightly blocks what's behind (inside).
There is a problem with how materials operate. You are unable to use an object/material combination as a negative. For e.g. assigning my posts above a material that has 3d body turned off negates it impacting the glass (ie no longer cuts) so I have to 'see' the gaps otherwise the glass goes straight thru. The post has to be directly inline with the glass to cut (fair enough) but turning the 'gap' material 3D body display off and the railing def no longer sees the post cutting the glass just because 3d body is turned off in the material display. (not sure why these have to be linked. If glass has frame (shr screen) then it's ok. just turn off glass but if in the case of glass balustrade you need to be able to do it.
Im thinking maybe using another object rather than railing, like a curtain wall and having a very small width frame using normal glass material that will elevate and another glass material that will disappear.
I've threads about mirroring objects, but only applicable to objects that are viewed in front, what if the objects are viewed from an angle, like if the object is skewed?
View 2 Replies View RelatedI have to design some things that will be fairly complex and also completely symmetrical. if there's anyway to have Illustrator automatically mirror something as i draw it, how the object is coming along big picture-like. I know this is possible in 3d programs I've used like 3DS max, but not sure about Illustrator. Or is there another CAD type program they'll do it that I could then import into illustrator?
View 9 Replies View RelatedI am trying to extrude an object in the negative Z direction.
Easy to do at the command line by putting a "-" sign before the distance to extrude the object but I'm having trouble in autolisp.
Define points for polyline for valence
(setq p1v p1)
(setq p2v (polar p1 (DTR 0.0) box_width))
(setq p3v (polar p2v (DTR 90.0) val_thick))
(setq p4v (polar p1V (DTR 90.0) val_thick))
;-- Create valence polyline
;-- Draw the polyline for the valence
(command "pline" p1v p2v p3v p4v "c")
;-- Assign the new part a variable name
(setq cab_valpl (entlast))
THIS IS THE PART I'M TRYING TO FIGURE OUT BELOW ....... WHAT IS THE SYNTAX TO EXTRUDE "VAL_HT" IN THE NEGATIVE DIRECTION?
;-- Extrude the polyline to make the valence
(command "extrude" cab_valpl "" val_ht "0")
Is it possible to remove associativity between mirror object.like we have in autocad.?
I want to delete source object without deleting mirror object.
I have just created a cylindrical object with an extrusion length of 300 mm and then created an assy(.iam). On to this cylinder i have placed a plate at right angles to the axis of the cylinder
What i wish to do now is mirror this plate.
It would appear the best way would be to create a work plane(mirror plane) thro the centre
Of the cylinder,however, how can this be done if when requested to create the plane 3 points are required,am i missing something here.
I am looking for a lisp routine which will allow me to mirror an object that I pick automatically. I don't want to have to pick the two points to set the mirror line. I just want the point I pick on of the object I select to be the point of the mirror. If that can't happen, I was wondering if the object could mirror at its insertion point (like if it were a block or a text.
View 7 Replies View RelatedI'm trying to change the dafault varible for the mirror command from no to yes. whne you do the mirror command after you choose your second point it asks if you want to erase the source object and the default is set to no but I would like to change it to yes. I'm able to change the macro for the mirror button which works but only when I push the button. Before the cui file I remember everything was done from the acad.pgp or the acad.mnu files but with the new CUI file i can't seem to locate wher to change the actual command and not just the macro for the mirror button.
View 6 Replies View RelatedIs Autocad have a command to calculate the volume of a solid object? If so, it would come in handy at times.
View 1 Replies View Relatedbest way to fill a box with spheres, non intersecting, random rotates?
View 2 Replies View RelatedI can use SolidSelection.Item for 3D object's handles and but I can't take 3D object's volumes with SolidSelection.
Then I can put object 's handles(1EE) to a collection. Can I use SolidSelection to keep my 3D volumes values? All sub-structure of my program works with SolidSelection Object.
Volume Codes;
For Each tEnt In ThisDrawing.ModelSpace
If TypeOf tEnt Is Acad3DSolid Then
Dim tEntSolid As Acad3DSolid
Set tEntSolid = tEnt
tmpVols1.Add (tEntSolid.Handle & "/" & tEntSolid.Volume)
End If
Next
I can't match with returned result of these codes and SolidSelection.item(i)
For Each tEnt In ThisDrawing.ModelSpace
If TypeOf tEnt Is Acad3DSolid Then
Dim tEntSolid As Acad3DSolid
Set tEntSolid = tEnt
tmpVols1.Add (tEntSolid.Handle & "/" & tEntSolid.Volume)
[code]......
I have a volume in my CAD file described by 3D Faces. Is there anyway to know what is the volume of this volume -that represents an open pit-?
Every time that I do a volume I do by the comparison of 2 surfaces but this is not the case now.
I created an enclosed "object" adding break lines to two different surfaces.
The blue surface shown on the attached drawing is a set of break lines added to "Surface A" and then the red is the other set of break lines added to "Surface B". I have already generated the volume enclosed within the surfaces by doing a surface to surface volume calculation.
My Question:I want to combine the enclosed volume created by Surface A & Surface B into a 3D "Block" that give me the volume information.
I want to mirror cut the models "selected" portion but it gives me result very far to it which is highlighted with red in the screenshot.
View 1 Replies View RelatedWith command massprop I can get many interesting data about 3d object, but where can I set material that my object is made of. Lets say I need to calculate volume and mass of my object which is made of aluminium, what are my options?
View 3 Replies View Relatedsee attachment (object viewer capture). The top surface is my OG, the bottom surface is the bottom of excavation for a building. I want to project the perimeter of the building footprint up to the OG surface at a 1:5 slope. I remember in LDD the perimeter of a building, berm, dam, ditch...could be projected to the OG with specific slopes and then you could create a surface with the projected lines and do a volume calc. between the two. What is the procedure to do this in AutoCAD Civil 3D 2012?
View 5 Replies View Relatedhow to mirror about a line, but the line was outside the object.
I now have a need to mirror about a line but the line is partially inside the object (so after mirroring the object would be overlapped). When I select both objects and try to create the mirror, the "axis" of the reflection is simply the edge of the object, not the line.
When the line was outside, that worked simply because when you selected both objects the line brought the outside of both selected objects to that point so it simply mirrored / reflected at that point (the line). So the line was not truly acting as a point of reflection. Hope that made sense.
I think I'm about to buy Cadtools from Macromonster but I would like to know if Draw has a way of acheiving this. Hey I may find out Cadtools can't reflect when the line is inside the object.
Is there a way to generate a volume report for a bounded volume surface?
View 3 Replies View RelatedI'm working with TIN surfaces, doing cut/fill comparisons for a surface mine.
My volume surface statistics show a cut volume of 5167.22 cy and fill volume of 8456.18 cy.
The sample line group volume report show cumulative cut of 5527.67 cy and fill of 8465.56 cy.
What could be some causes of this disparity. All reference surfaces are built from points and use a non-destructive boundary.
I've read a few threads on this way back but cannot locate them. I have two surfaces and create a volume surface and it reported the volume as 493 cy. I then ran some sample lines at 25 foot interval and the total volume is reported as 964 cy.
View 1 Replies View RelatedI want to use it as my primary hydrologic and hydraulic modeler. It only makes sense. Well, I got the program to work and had things linked in and was able to route a storm through the network. But when I routed the storms, I had to model double the storage that i expected.
So I went back to the program I'm familiar with - Pondpack by Benltey - and designed the same system I routed in SSA in that program - and got the storage volume that I would expect for a site of this size - about 2 acres.
Is there possibly a setting that I'm missing that makes my outlet structures route slower or less than they should? Or is there some other reason that a system would give this kind of inflated need for storage?
I have an issue with using Bounded Volume or Adding a Boundary to Volume Surface things so bad... = incorrect volumes.. sometimes extremely incorrect.. I understand that the surface rectangle when a boundary is added but this could be horrible if not checked.
View 3 Replies View RelatedI'm no longer able to control the PP (monitor) volume using my computer volume controls. I've always controlled the monitor volume using my computer volume levels, but starting today, that has changed.
The volume is just playing at the level recorded with no way for me to turn down or up.I performed a disc repair and that didn't solve the problem.
I'm using Inventor 2014.
I created a Punch Tool iFeature, everything seemed fine, I could save it without problems.
However, when I try to place it in a part with the Punch Tool, it says "The file has 0 volume changing features. To be a valid punch tool, the .ide file must contain at least 1 sketch-based feature."
I have a machine and I want to make it look like it's sitting on a shiny smooth surface, and I want it to reflect on the surface.
I have played around with the liquify and I am apparently very bad at it because it just distorts it too much. I want it to be a fairly clean replica, like a mirror.
User insert a block . then rotate it (Say 45 degress) . then mirror it.
Now My program read that block properties ( Rotation ) and try to replace that with another block .
But becuase the original one is mirrored. you know what happens !.
So I have to know whether the original block is mirrored or not. Then if yes I mirror the inserted one by program as well
Seeing flipped objects losing edges, and gaining edges?
This is in Nitrous (haven't tested DirectX).
Symmetry works out ok - just the mirror tool giving bad results. Works fine in 2011.
I am trying to make a cool desktop for myself. (attached image of how far i am so far) i want it to be the logo i made reflecting off of a black floor or really dark water, with sparks bouncing off of the logo and the ground/water.
View 4 Replies View Related