I have big problem with backburner 2012 using my new HP laptop (win7 64). The server and manager don't start and I get an error trying to deinstall BB. On my other workstations the BB software run just fine. What should I do?
View 9 RepliesI cannot start "Backburner Server." I restarted my Mac a couple time but never can change the red light.
Mac Pro (Early 2008) with Mac OS Mountain Lion 10.8.2
AJA KONA 3G
RED Rocket (Driver ... v1.4.32 & Firmware ... v1.1.16.11)
Every time I try to connect to adobe.com I always arrive on the Autodesk Tool with Backburner and WiretapCentral page.
I can used each browser I own it still the same. I try to flush cookies everywhere and it's the same.
It looks like the page adobe.com (YES) is redirect to a local page from Autodesk.(only [URL])
I try to do the same in an other user account on my mac, and it is the same.
So I look in the activity monitor to locate if an Autodesk thing is on. I isolate BackburnerManager and BackburnerServer, on. (Smoke is off)I tried to hard quit them but I couldn't
3dsmax2013 64 bit.
I am have problems starting the backburner Manager on my workstation, i do not get any error messages it just does not start.
I have installed the new update for backburner. but still no Manager.
I have a small render farm of about 6 computers running Backburner for a Max Design 2013 animation. After working fine last week, one particular computer is not able to run Server, although all the rest of the computers seem to work fine. On Server startup, the error message is:
Error receiving information: An existing connection was forcibly closed by the remote host (0x2746)I'm not finding very specific information regarding the message by searching Google.
I have a render node whose server appears in the backburner manager. However in the Network Job Assignment dialog the server does not appear. The server does show up in the Monitor.
All boxes have latest 3dsmax 2012 as well as latest version of Back-burner 2012
I've been using backburner for a number of years and never run across this message before. What does it mean and why does it happen when it says.
Skip assignment to server xxxxxxxxxxx
The manager then won't assign a frame to that server.
we have a dilema regarding Backburner 2013:
I work at a studio and we want to buy new servers and we want to purchase Windows Server 2012 wich, from what we read is based on Windows 8 architecture. We read BackBurner 2013's specification and Windows 8 didn't appear as supported.
Our question is: If we buy Windows Server 2012 Enterprise for the render farm will it work with Backburner 2013 without any problem?
Running PR 5 and I'm getting an error message that says "no backburner server with adaptor. media converter 2013.1.0 on manager tdricander"
View 2 Replies View RelatedI'm trying to set up Backburner and 3DS Max Design, and I'm a newbie to both. I'm getting the warning 'Could not find a Manager. Will keep trying...' when I try to connect to my manager machine from the server machine using the manager's IP address. I can connect to the manager from the monitor on the server machine, however, and I can connect from a virtual machine running Windows 8. The server machine is running Windows Server 2012 - I haven't been able to find where someone says if you can or can't use Server 2012.
View 3 Replies View RelatedI have been running PR5 for a while and everything has been stable. Today Smoke locked up and I had to force quit. After the force quit I have been unable to start Backburner. If I try to export I get this message:
Cannot connect to Backburner Manager. localhost:Backburner: Connection Refused.
If I open Smoke Prefs and try to toggle the Backburner Manager box I get the following:
Backburner Configuration: Unable to switch to localhost. Connection Refused
I have tried re-starting Backburner in the Service Monitor and each time it will turn green for 10-20 seconds and then turn red. I have also double checked that the Manager Hostname in Smoke Setup is set to localhost. I have checked my Network settings and only Airport is active, using DHCP and IPv6 is set to off. I have uninstalled PR5 and installed PR6 but still have had no luck.
Oddly if I type sudo nano/usr/discreet/backburner/Network/backburner.xml into terminal I get "command not found". Similarly if I type ping hostname I get "cannot resolve hostname: Unknown Host"
I've tried to export from Smoke 2013 and it tells me i can't connect to BackBurner Manager.
In the service monitor, the BackBurner is showing red - (tho the Manager is green) if I restart it goes green for a moment and then stops again.
I am trying to enter use the URL... and I am prompted by an Password Protection.
1.) crosshair
2.) clear swipe areas
3.) Desktop Tools (like the Idea where you placed the "hacked" ones)
4.) beiing able to kill the tabs at the bottom and the apple bar at the top
5.) TRIM MODE like AVID (no ones really knows how handy this thing is when you have 16or more audio tracks at a feature film)
6.) Give us a snapshot of an image that we can grade a little bit better. (or show me where it is ;-))
7.) Easy subtitle option (STL Import or whatever - change all the 700 Titles in one go...
8.) The ability to conform to PARTIAL FileNames (would make relinking of fals imported D5 Material from Meda Composer wayyyy easier - since AVID keeps the names but adds a zillion of useless characters at the end)
8.a) straight forward force relink option.
9.) simple blur functions in text editor
10.) direct output for H.264 for blu ray that we can use directly in Encore (or do we have that?)
"cannot connect to backburner manager localhost"... What can I do to resolve this problem? I can't export a movie of my finished product.
View 1 Replies View RelatedPlanning on moving to 2013 from 2009, but I want 2009 working during the migrations period...
How to get 3DS MAX 2009 working with backburner 2013.
The Backburner manager dosn't seem to load any 2009 render plugins, I've upgraded the current node with the latest Service pack/hot fix for 2009, which adressed the an compability issue with backburner 2012. Isn't BB 2012 also using the new "render adapters"?
Tried everything... reinstalls, regedit checks, AppData cleans and so on...
Took a "while" just to get BB 2013 running at all, until I found a way to disable IPv6 via the helper service.
I know that in ACAD you can use the xref manager to see where the actual file for the xref resides on your computer/server/etc. What I'm curious about is whether or not the inverse action is possible. Can you somehow access the file (not the output sheet where it's being xref-ed) and see what other files are using it as an xref?
I've come in on a project that is nearing completion and have been assigned the task of "cleaning up the project folder." Unfortunately, there are a ton of files in the different folders that are no longer in use on the final output sheets and I need to keep the ones still in use and archive the ones that are no longer needed. What I've been doing is going through those sheets and reviewing the xref manager for each sheet to see which files are actually put onto those sheets and making a physical checklist from which to organize my findings. Once the checklist is made, I then archive all the files that are no longer being used.
I copy a .dwg to my remote computer and open it. Then .dwl and .dwl2 are created in same local folder as the .dwg I just opened localy. Then I copy the local .dwl and .dwl2 files back to the remote server in the same location I received the origional .dwg from. Why are those files not locked now from everybody on the network that I am remotly away from?
View 7 Replies View RelatedI can't seem to get my profile start and end station labels to appear even after I checked "Label start station" and "label end station" in the profile view properties.
View 2 Replies View RelatedI got this error
Unable to start application (0xc000007b).
I already tried several fixes like:
1. reinstall all redist(x64 & x86).
2. reinstall .Net 4.0
3. Use CCleaner for Registry error.
4. chckdsk for error and fix.still error so I've gone through this.
5. I uninstall Autocad 2014 completely, uninstall it manually one by one,deleted left over folder of autodesk or similar software to it, deleted its registry keys.just like the instruction on how to remove autocad completely in autodesk, I just followed it all. [after Reboot]
6 I Re-install it and still the problem persist.
primere pro will not start... appliction unable to start correctly 0xc000007b
View 1 Replies View RelatedI want to start AutoCAD LT without the empty drawing. Just AutoCAD and the welcome screen. How can i do that? I always close the first drawing and begin a new one by choosing out of several templates or start with an existing drawing, rename and modify it. For NEW or OPEN i like to use the welcome screen.
View 3 Replies View RelatedI just installed 3DS Max 2012 with a student license, but I encountered a problem that doesn't seem to go away. Whenever I open it, it gets to the "Starting 3DS Max 2012" screen and then freezes. The process freezes as well. Is there a way I can fix this? I have Windows 7 Ultimate, 32-Bit, and a Dual-Core Processor. My computer meets all the System Requirements except an insufficient video card.
View 4 Replies View RelatedI have a VB .NET Dll that add a new ribbon in AUTOCAD.When I load this dll from AUTOCAD, this new ribbon is well added.I'm trying to start this dll with AUTOCAD Start.
I've tried to load the DLL from the acad.lsp but the DLL is loaded before AUTOCAD load the ribbon, then the dll is well loaded but my new ribbon is not displayed !.
I've finally set up my renderfarm. I have Maya 2012 suite (network install) and Max 2012 (dedicated install) on my workstation. I have a network licence manager computer for Maya 2012 and 4 renderfarm computers for backburner. (Thats how I presumed the setup should be)
The installs for the workstation and licence manager are working fine. I'm now trying to install backburner on the render farm computers but cannot install backburner without installing the whole 3dsmax suite.
My questions are is this setup correct?Do I have to install the full suite on the renderfarm computers to get backbuner to work?
This is what I am doing:
1. Main Computer> I run a Manager
2. Main Computer> I run a Server which connects to the Manager (no problems here).
3. Main Computer> I run a Monitor.
4. Second Computer> I run a Server, it connects with Manager on the Main computer no problems.
5. Main Computer> I click connect in the Manager and it connects showing both computers available and idle.
6. In 3dsmax 2013, I choose Network rendering and it pops out the window where I leave options as they are and click connect in the available server list it only shows the Main computer the other one is not there (although it is in the Monitor list). When I start rendering only one computer is used for the process.
Backburner 2013 the newest version just downloaded
3DSMax 2013 Student version
I'm trying to fix a backburner/3ds max problem that's been plaguing our render farms at work for some time now. I'll give an example of what happened with last nights renders.
I sent a scene off to get rendered, and the footage that comes back has a texture from one of the objects flickering between 2 different versions of the texture. In this case, a normal map on one of the workstations was rendering a slightly older version. I had edited the normal map earlier that day and it was rendering the version of said normal map in the state it was before I editted it. It's not limited to normal maps, just any texture file really. It's also not a GI flicker. We can't seem to pin down the reason why a server or workstation would use what appears to be an outdated texture.
We were hoping our recent transition to a domain based network would fix this but it hasn't. Texture files are packaged and sent with any backburner job, so even if the workstation is has a local, older version of the same texture file, it shouldn't matter.
The OS on the workstations is Windows 7 Pro 64-bit, and the render servers run Windows 7 server. Rendering with vray 2.0, 3ds max 2012 x64.
My rig is a laptop with two GB of memory and an Intel celron 900 processor. I am modeling out a building and have begun adding light sources. This has put a huge drag on my laptop, and I can barely move the viewport. is there a way to share the load via backburner or something else with a much more powerful rig?
View 4 Replies View RelatedI tried rendering a sphere with an multipage pdf earthmap over backburner. The map is only loaded and rendered in lowres. Rendering on each workstation locally works fine and highres and as expected.
View 2 Replies View RelatedIve gained access to a very powerful 32 core machine. Im using maya but im sure the same applies to 3dsmax, The initiation of each frame is actually single threaded, whereas the rendering itself is multithreaded.
Because of this the cores are not used until the actual rendering starts.Ive noticed that The initiation is taking about 2 mins, whereas as the render is almost instantly complete because it utilizes all 32 cores.
Is their a way to tell backburner to start initiating more then one frame at once on a single computer? Or can the initiation and the actually render be split up into separate jobs?
Any other distributed software packages that might accomplish this?even though the 2 mins isnt that much. The time savings would be significant over thousands of frames.
I installed Backburner same I used to install the older net rendering system.
It will not render when installed as a service.
If I run the server as an application and I am logged in as administrator it works.
When I install it as a service it won't.
The Service is run using an account that is an administrator on the local machine and that account has admin privileges on all local machines. It is not a domain admin account though.
I get an error on the manager software that there are no valid servers to process the job. On the Monitor software all servers are listed as being absent.
This became a problem when Backburner came out in place of the older version of the network renderer. Approx 2009 version. Even though they both appear to be identical what used to work fine now doesn't.
where backburner saves the files that are in the render queue. I would like to extract some of these files to reuse as scene states.
View 4 Replies View Related