3ds Max :: Backburner Manager Doesn't Load Any 2009 Render Plugins
Jun 13, 2012
Planning on moving to 2013 from 2009, but I want 2009 working during the migrations period...
How to get 3DS MAX 2009 working with backburner 2013.
The Backburner manager dosn't seem to load any 2009 render plugins, I've upgraded the current node with the latest Service pack/hot fix for 2009, which adressed the an compability issue with backburner 2012. Isn't BB 2012 also using the new "render adapters"?
Tried everything... reinstalls, regedit checks, AppData cleans and so on...
Took a "while" just to get BB 2013 running at all, until I found a way to disable IPv6 via the helper service.
View 8 Replies
ADVERTISEMENT
Nov 22, 2012
3dsmax2013 64 bit.
I am have problems starting the backburner Manager on my workstation, i do not get any error messages it just does not start.
I have installed the new update for backburner. but still no Manager.
View 1 Replies
View Related
Oct 30, 2013
I'm trying to set up Backburner and 3DS Max Design, and I'm a newbie to both. I'm getting the warning 'Could not find a Manager. Will keep trying...' when I try to connect to my manager machine from the server machine using the manager's IP address. I can connect to the manager from the monitor on the server machine, however, and I can connect from a virtual machine running Windows 8. The server machine is running Windows Server 2012 - I haven't been able to find where someone says if you can or can't use Server 2012.
View 3 Replies
View Related
Nov 14, 2012
Is it possible to use backburner to net render in autocad 2013?
View 2 Replies
View Related
Dec 17, 2012
I have been running PR5 for a while and everything has been stable. Today Smoke locked up and I had to force quit. After the force quit I have been unable to start Backburner. If I try to export I get this message:
Cannot connect to Backburner Manager. localhost:Backburner: Connection Refused.
If I open Smoke Prefs and try to toggle the Backburner Manager box I get the following:
Backburner Configuration: Unable to switch to localhost. Connection Refused
I have tried re-starting Backburner in the Service Monitor and each time it will turn green for 10-20 seconds and then turn red. I have also double checked that the Manager Hostname in Smoke Setup is set to localhost. I have checked my Network settings and only Airport is active, using DHCP and IPv6 is set to off. I have uninstalled PR5 and installed PR6 but still have had no luck.
Oddly if I type sudo nano/usr/discreet/backburner/Network/backburner.xml into terminal I get "command not found". Similarly if I type ping hostname I get "cannot resolve hostname: Unknown Host"
View 8 Replies
View Related
Dec 19, 2011
I have big problem with backburner 2012 using my new HP laptop (win7 64). The server and manager don't start and I get an error trying to deinstall BB. On my other workstations the BB software run just fine. What should I do?
View 9 Replies
View Related
Jul 12, 2011
My rig is a laptop with two GB of memory and an Intel celron 900 processor. I am modeling out a building and have begun adding light sources. This has put a huge drag on my laptop, and I can barely move the viewport. is there a way to share the load via backburner or something else with a much more powerful rig?
View 4 Replies
View Related
Mar 22, 2011
I got a few render boxes, the older ones (mix of XP and win7) are generally fine.The new machines however fall over (crash with `unhandled exception`) while network rendering through backburner. This has the effect that 3dsMax `hangs` i.e waits for you to remote login and click `cclose program` (this may be a windows message though)This effectively removes the machine friom render slave mode as it hangs until max is manually closed.
Either i need to find out why they`re crashing and stop it or a way to make max crash and auto shut down/reboot max/backburner or even a machine restart would do.
(again, the error is ridiculously vague. windows 7 64bit is up to date as is max2011).i just checked and it`s windows thats crashed, asking to sened info to microsoft.
View 9 Replies
View Related
Feb 15, 2014
I've tried to export from Smoke 2013 and it tells me i can't connect to BackBurner Manager.
In the service monitor, the BackBurner is showing red - (tho the Manager is green) if I restart it goes green for a moment and then stops again.
View 9 Replies
View Related
Nov 15, 2012
Every time I try to connect to adobe.com I always arrive on the Autodesk Tool with Backburner and WiretapCentral page.
I can used each browser I own it still the same. I try to flush cookies everywhere and it's the same.
It looks like the page adobe.com (YES) is redirect to a local page from Autodesk.(only [URL])
I try to do the same in an other user account on my mac, and it is the same.
So I look in the activity monitor to locate if an Autodesk thing is on. I isolate BackburnerManager and BackburnerServer, on. (Smoke is off)I tried to hard quit them but I couldn't
View 9 Replies
View Related
Jun 20, 2012
I am trying to enter use the URL... and I am prompted by an Password Protection.
1.) crosshair
2.) clear swipe areas
3.) Desktop Tools (like the Idea where you placed the "hacked" ones)
4.) beiing able to kill the tabs at the bottom and the apple bar at the top
5.) TRIM MODE like AVID (no ones really knows how handy this thing is when you have 16or more audio tracks at a feature film)
6.) Give us a snapshot of an image that we can grade a little bit better. (or show me where it is ;-))
7.) Easy subtitle option (STL Import or whatever - change all the 700 Titles in one go...
8.) The ability to conform to PARTIAL FileNames (would make relinking of fals imported D5 Material from Meda Composer wayyyy easier - since AVID keeps the names but adds a zillion of useless characters at the end)
8.a) straight forward force relink option.
9.) simple blur functions in text editor
10.) direct output for H.264 for blu ray that we can use directly in Encore (or do we have that?)
View 1 Replies
View Related
Feb 19, 2013
"cannot connect to backburner manager localhost"... What can I do to resolve this problem? I can't export a movie of my finished product.
View 1 Replies
View Related
Dec 10, 2012
I have been using Max 2012 with Backburner 2013 without a problem for the last 8 months. I have just finished a project so I thought I would test the same project that works fine on 2012 on 2013.
On the render server everything works fine. On all the render nodes I get the following error
Application Load error 3ds max adapter error 3ds max process no response
3ds max 2013 is installed on all the render nodes.
I'm really getting tired of problems going from 1 version to the next. how much time goes into testing new versions each year. I would gladly have less upgrades but upgrades that work
View 2 Replies
View Related
Jan 31, 2013
I am working with the animation sequence where I have a video file linked to the object (camera moving through the room showing a TV screen on the wall with a move playing on the TV screen, the movie is linked .mov file). When I make the rendering using the BB everything works fine if I just use one server (the one where I have the main max installation, where all the maps and linked items are located). As soon as I try to use other BB servers in the network I get the error message referring to the linked .mov file. I have the Include Maps ticked in the Network Job Assignment window and if I change .mov video file to static image like. jpg the network rendering works without problems. How and where the .mov video should be set to get the BB network rendering to work correctly in distributed rendering.
View 4 Replies
View Related
Aug 4, 2011
Application load timeout (20 minutes).I googled it and found here on The Area some1 also posted this a few years back, but didn't get a reply.
Yes I know you can set the timeout limit, but surely max shouldnt take 20 minutes to start up. And as I said, it was working fine one day, then next day suddenly this.Its on Max 2012 64bit with Backburner 2008.1.1..I'm running it as a service with my username
View 2 Replies
View Related
Feb 14, 2013
Video Post to Backburner network render hangs on next frame..I use Max’s Video Post to setup my render sequences to submit them to backburner. There are a couple issues with video post but not as bad as the one I have now. Each time I setup a render and submit it to backburner the first frame assigned to each system will render fine but then the servers get hung-up “waiting for frame” and consume ALL of the available RAM. Of course if I don’t do network render, the video post runs without a hitch. That of course defeats the purpose of having a render farm that video post SHOULD be able to use. And also, if I go through the ‘render’ dialog box, and do network rendering, I can get each series of frames done as well but it’s not as clean and orderly as with video post.
Oddly enough, in Max 2009, all of this worked just fine. Ever since they (autodesk) fixed (broke) backburner in 2012 video post has never been the same. Since I am a lowly low budget animator, video post was a bonus in 2009 for having everything in one bundle for mixing and matching multiple views and inputs with overlays for production. It was great! One could set it and forget it overnight and in the AM all that was left was compile the images to sequenced avi. Alas, that has been somewhat limited now in that you can only render the views that are active, so max of 4 views or cameras (if this has changed for others pls let me know). Annoying especially if you forget to have a single camera active and set the render and it then hangs on it… no visual error saying such and such is missing just dumb blank screen (sometimes).
Another oddity, after saving a video post layout, if I open that file on a secondary system for edits, the video post will have blanks for file outputs. I’ll then have to re-point the outputs to be able to use the limited video post functionality. A pain and can deal with it but still, the outputs are all on networked drives (all mapped to same drive letter etc) and ever if I direct it straight through the network they go blank; i.e. \serversharediretoryoutputs
I’m attaching a simple ‘teapot race’ max file that exhibits the same problem of the video post on render fails just in case it’s a file setup issue.Also find below the log file outputs of a system during the aforementioned hanging render sequence. , I was running the debug and the log shows max hanging on the ‘waiting for frame’ then eventually dumps the job, reloads, does 1 frame, then hangs again for 10-15mins.
View 7 Replies
View Related
Aug 19, 2011
The issue that I am seeing is that BB 2012 is slower at rendering than BB 2008.
1. The server hardware is the same with no other changes other than upgrading to BB 2012. I uninstalled 2008.1 prior to the upgrade.
View 1 Replies
View Related
May 8, 2013
I just noticed that I get a "3dsmax.exe process no response" when I try to render a scene that has populate people in it on backburner
View 1 Replies
View Related
Oct 8, 2013
Too often, I have a job, where backburner assigns a bunch of frames to one server while all the others sit there idle as if to agonize me for all the money I spent and lack of time I have.
It happened this time when rendering with skipped frames selected. It assigned 20 frames to one machine. Reseting the tasks doesn't reaqsign them.
View 5 Replies
View Related
Oct 26, 2013
I have some issues with 3ds max render farm and plugins, what is the right and best way for configure plugins (fumefx, greeble, etc) in all nodes of a render farm?Install all plugins manually in all nodes, or there's a fast way with some configurations in an .ini file, etc?
View 5 Replies
View Related
Nov 17, 2012
have 3ds max 12 x64
micro visual c++ 2010 x64 runtime
redistributable
plug in with DLX extension x64 also tried other DLX plugins in maxsdk directory wanted to know how do i load these plugins cause when i try it gives me this error:
Error loading plug in DLL
DLL <filename> doesnt implement the following functions:
LibNumberClasses
LibClassDesc
i can load other plugins but not the dlx extension ones.Tried installing it on an another computer with no success.
View 1 Replies
View Related
Mar 23, 2011
I see that there are a lot of really cool plugins, but I haven't found how to load them into my copy of paint.net.
View 3 Replies
View Related
Sep 6, 2013
When using the ploygonal lasso in CC I find I cannot complete a selection without the lasso completing itself accross the proposed selection area.Did not experience this with CS6 -Have I got a setting wrong?Also how do I load in my plug ins particularly Nik software?
View 1 Replies
View Related
May 25, 2012
After I migrated to Windows 7, PSPX3 does not load the plug-ins anymore. It says: "No plug-ins loaded." Older versions of PSP can load the plugins from the same directory, but not PSPX3. I have tried resetting the cache, and have checked the file location. It's correct and it is notched, but nothing works. I have 6Gb of RAM so it should do. Of course, I could always run the scripts in PSP8, so it's no big deal. But it should work.
View 1 Replies
View Related
Oct 15, 2006
How do you load eye candy 4000 plugins? I have them on my hard drive.
Keep'er simple just installed it.
View 9 Replies
View Related
Oct 16, 2013
getting this error?
After Effects warning: The following plugins have failed to load. Please reinstall these plugins:
C:/Program Files/Adobe/Common/Plug-ins/7.0/MeidaCore/CineForm/CFHD_AVI_Importer3 2.prm
C:/Program Files/Adobe/Common/Plug-ins/7.0/MeidaCore/CineForm/CFHD_MOV_Importer3 2.prm
I can't figure out how to reinstall.
View 4 Replies
View Related
Mar 2, 2014
I installed my Afterfx and Premiere in "D:program filesAdobe", and MBLooks plugin, it was installed in the folder "D:Program FilesAdobeCommonPlug-ins7.0MediaCore" automatically, but it was not loaded by Afterfx and Premiere, then I move the plugin to "C:Program FilesAdobeCommonPlug-ins7.0MediaCore", it's loaded.
View 3 Replies
View Related
Sep 26, 2012
I've got about 4 hours of work into solving the dreaded "Photoshop: CS6 saves in wrong file format on MacOS when trying to load obsolete plugins" (Aside: I don't suppose I can send Adobe an invoice for billable hours?? Naw, never happen.)
I could still not get CS6 PS to open and "save as" correctly. All of my plug-ins were current and the only linked ones were reinstalled after PS was updated. URL.... I saw multiple mentions of the "Standard Multiple Plugin" as a possible source of the problem. Found this file in /Library/ Application Support/Adobe/Plug-ins. (Mac OS X 10.7.5) Removed the file and PS does what it should: defaults to all file formats on open and allows any format to be selected on "save as."
Get Info identifies this file as an Adobe plugin ver. 12.0.2 created and modified 7/18/11 obviously well before I got CS6. It also shows an Adobe copyright (2003-2010) message so this is NOT a third party plugin, nor is it a bad symlink, nor is it an outdated 3rd party plugin. Since this was placed there by the Adobe install and not modified by the CS6 upgrade, I can only conclude that Adobe wanted it there.What - if anything- will happen without this file in place and if it is necessary where does one obtain a new one?
I did not copy any old plug-ins to the new program nor did I have any bad aliases nor did I have multiple copies of anything.
View 17 Replies
View Related
Oct 17, 2013
Since upgrading to LR 5.2, I can no longer upload photos to Facebook. I get this message: "An error occurred while attempting to load this plug-in’s portion of the Export dialog. attempt to index upvalue '?' (a nil value)"
How do I get LR 5.2 to work again with my Facebook account?
View 5 Replies
View Related
Jun 20, 2013
I am using AutoCAD LT 2014. I have started to have trouble loading the page setup from the Publish manager. I used to be able to click, "import" and select the dwt file I required. I could then use the imported page setup to publish the sheets I wanted to PDF. Now, when I try to import, it is not populating the pulldown list with the imported page setup.
View 7 Replies
View Related
Jul 2, 2013
Why is it, when I restore a layer state to a blank drawing, it cannot load the linetypes saved to those layers? I get an error that says Linetypes not loaded and then wind up with a full set of layers all with CONTINUOUS linetype.
If I bring in a block from a toolpalette that has a new linetype and layer, it will create them for me just by inserting the block. Am I missing something??
View 6 Replies
View Related
