Xara :: Multipage PDF From Images?
Nov 22, 2011
I found myself in the situation today of having to make a multipage pdf document from many individual images. There were over 100 images of each page and I didn't like the idea of manually creating new pages, dragging the images on, resizing and aligning each time etc. probably about an hours work or more. Luckily there's a way to do it in less than a minute using the autoreplace name used in photo galleries.
Here's the steps on how to do it.
1: On your first page drag on any one of the images, position and resize it accordingly.
2: Apply the name autoreplace to the image
3: Select and drag all the images from your folder onto the first image
4: Choose duplicate page from the dialog that pops up
presto a 100+ page document that can now be saved as a pdf.
View 4 Replies
ADVERTISEMENT
Jul 26, 2011
If you have a multipage document such as the plans for a house you can have a different scale factor on each page if you turn off "All pages in document the same" in the Options dialog's "Page Size" tab.
Then you can set different scales on different pages. E.g. 1:100 for house floor plans and 1:500 for site layout plans.
View 4 Replies
View Related
Jun 1, 2006
I have Photoshop 7 and converted some jpg scans to pdf files, then combined them into a multipage single file. I wanted to edit one of the pages, but can not recall how I created the multipage file.
View 1 Replies
View Related
May 31, 2013
i was using Photoshop Cs3 in work and they upgraded all the photoshop versions to CS5 . Now i can't find where i can create a multipage pdf. I was using the pdf tool so often it's important for me.
View 1 Replies
View Related
Jul 9, 2008
Running PS 7 on Windows XP.
Is it possible to do a multipage scan in Photoshop 7 and to have all the scanned pages saved as one PDF file. At the moment I can only find a way that gives me the same number of files as I have scanned in.
The reason I am having to do this is because I am having a problem with the scanning facility in Acrobat 8.
View 9 Replies
View Related
Oct 30, 2013
I need to be able to convert documents (.pdfs or anything else really) into multi page, CCITT group type 4 .tiffs. I've read that this is possible to do in Photoshop, but when I tried downloading a trial on my computer, I wound up with a corrupted hard disk (unfortunately, this is also on my personal, not my work computer), but no functional software. How to get Photoshop to run without destroying my hard disk, I'd like to find out if it's worth the trouble.
View 1 Replies
View Related
Mar 27, 2013
I had a task to edit 10 pages of specifications TIF format containing 12 pages.
View 1 Replies
View Related
Feb 8, 2013
how can I save a file in CS6 as a multi page pdf?
View 1 Replies
View Related
Dec 18, 2012
I was victim to the MS update that wiped out all the fonts. I undid the damage with a restore, it was the only way for my X64 Win 7 system. Now, suddenly, making multipage PDF's is a nightmare. I have always used the same process and settings on the PDF converter (been doing it since X3 with no issues) Now, I cannot set the settings to get a normal sized PDF... they usually are 5 megs for a 5 page pdf... now they come in at 35 megs? It's always ignored the graphic items I have placed off of the page... now, it appears it's including these items and I cannot figure out how to adjust the settings - I've tried everything.
The only work around was to save the file under a new name, delete all extraneous graphics off the page, then make the PDF. It comes out as it should if I do that. I've never had to do that before... it's always simply used the graphics on each page when it's checked as "pages 1-5".
View 12 Replies
View Related
Dec 7, 2012
Gimp open a multipage tiff as a multilayer image and i can edit it. But wheni save it, all layers are merged into one and i've get a onepage tiff. Howcan i save a multipage tiff?
View 6 Replies
View Related
Nov 27, 2012
Every day at least a dozen times I print spot color separations for film through the print dialogue to pdf, and every single time I have to either print the spot colors one at a time, or open the multipage pdf in Acrobat and use the clunky extract page function to get separate files. Is there any way to just get it to print separate pdfs?
Then I have to rename each sep to have the color in the file name. If there was a way to automate that?
View 3 Replies
View Related
Mar 24, 2012
I'm using Illustrator for work and I love it, I never needed scripts yet. Now I have couple houndred svgs coming in per day, I would like to have a script that opens every svg one by one in the selected directory and add them to a pdf as pages of the same size and than save it.
How many files I could put in 1 pdf this way?
I'm using Illustrator CS5 on Win7 x64.
View 7 Replies
View Related
Mar 5, 2010
Often times when designing a logo I create different versions and variable options on layers. This can result in several layers in one Illustrator file. Is there an easy way or an existing script that will allow me to (with one click) create a multi-page PDF consisting of all the layers within my .ai file? The current method is turning on each layer, performing a save-as (PDF), then turning off said layer and turning on the next layer and repeating the task and so-on-and-so-forth, etc … It becomes tedious and quite often I save over the previous version, forgetting to re-name it or forget to perform a save on a certain layer. I have never written my own script before but am not opposed to trying, where do I begin?
View 12 Replies
View Related
Aug 5, 2013
I have multipage (16 pages) document with linked frames of paragraph text. Every page consists of 2 linked frames of paragraph text and second one is linked to the first one of the next page. When printed, it prints only first two pages as a whole. And the 3-rd and all the others prints only first frame of the page and two rows of the second frame of the page.
Is this my printer (Canon LBP3010) or the CorelDRAW ?
BTW: Paste 16 pages from WORD to Corel X6 takes infinity and crashes. In Corel 9 it takes about a minute for 80 pages!
View 3 Replies
View Related
Oct 18, 2012
I am working on a project that requires the images I create must be at least 250 DPI, preferably 300 DPI.
When I export, I am specifying 300 DPI, but the resulting image is only 96.
Is there a setting somewhere that is causing them to revert back?
View 5 Replies
View Related
May 16, 2012
I have to get to my printer ASAP with these images and i am having issues with a memory exception error, i have tried different computers to no avail, i have attached the .xar file and i need both images exporting as 300dpi jpegs. the images in the file are at 100% size but i can also live with 50% 300dpi jpeg exports.
the black background is C35 M35 Y35 K100 (rich black) and i have converted all fonts to shapes won't need the fonts. Both images use the 'speedometer' graphic as a clip view
View 9 Replies
View Related
Oct 13, 2012
when i create images in Xara they look very clear and crisp but once exported and appear on the website they lose their clarity and sharpness.
Which brings me to the question.. what is the best way to export images for a website? Are there advanced settings that I may use to improve the images appearance on the website.
Heres a link to a website: [urL]........ and Im uploading the Xara document as well.
View 3 Replies
View Related
Nov 27, 2011
why many images (mostly .jpg, .gif, .png) that I drag into xara from other programs such as email software, fire fox, etc. that I have a message that says "Out of memory" (even if i just choose import image location or import image from file, there is no such message) or, the screen just blinks as if it were adding the image to the screen, and nothing is changed or added?Am I doing something wrong here, or should I just give up on dragging?
View 7 Replies
View Related
Jan 11, 2013
I have our daughter's Nativity on my hard drive, and wanted to try some image screen capture so that our Playgroup can send a photo to our local newspaper. I have played the video, paused then performed a "Print Screen." I have then pasted that paused image into Xara PGDv7. But seem unable to resize the pasted image. If I try to resize the image, the resizing window just concentrated upon a portion of the pasted image. I thought this would have been straight forward, but it doesn't seem to have worked. Playgroup asked whether I could do this asap.
View 3 Replies
View Related
Feb 25, 2011
Are there any good video tutorials for redrawing logo such as the one I'm including. Some of my clients don't have the original artwork and I'm stuck with having to redraw small images to get better quality.
View 2 Replies
View Related
Nov 2, 2011
I am a new user testing Xara P&GD7.
I worked through a tutorial to put some of my own images in a folder to use as fills and clipart, going through the index process etc worked fine. I couldn't see any way to save them so I hoped it would be an automatic save for such things. Unfortunately they have now disappeared. Is there a way to save my own folders so that I can use them in any document?I normally work in 8" x 8" square pages, but each time I need to go back to Options and select Units: Inches and page size: Custom and type in the size. Is there a way to save Options?
View 9 Replies
View Related
Jul 8, 2011
Open Xara Designer 7 for Windows - demo version.
1) Create a solid block of colour at an integer coordinate (say 0,0).
2) Make it an integer width and height (say 128 x 128)
3) Export
4) Choose '.png' (or '.jpg' - the same effect will manifest)
5) Zoom into the preview and see the weird discoloured edges produced
Alternatively, do the same thing with 'Create Bitmap Copy' and observe the same results.
I'm aware that if you have non-integer sizes/positions it anti-aliases, but this isn't supposed to happen if you rectify these.
[Edit: I think I found out what it was: on my Pro version, I have the option to minimise anti-aliasing, which might well be the issue. Oddly, I can't reproduce the problem at all on my Pro version, but only on my brother's demo version!]
View 6 Replies
View Related
Dec 25, 2013
How are people importing multiple images into a projects. There must be some smoother way than diddling around with at least 2 dialogs for each image.
How can I batch import or whatever where the resolution and wither to merge or not is answered 1 time? The idea of answering 60 questions to import or drag and drop 30 images seems way unnecessarily cumbersome..
View 8 Replies
View Related
Sep 28, 2012
why I am all of a sudden getting issues with importing CMYK images as per the enclosed, and how can I get around this?
Xara CYMK issue.doc
View 6 Replies
View Related
May 31, 2011
Running Designer pro 6.1.2.13287 on Windows 7 Home Premium
I'm probably bumbling around and buggering up the export of png formatted images, but it appears something besides transparency is getting exported as backbround.
I do `Select all' then export to png.The poorly drawn green arrows were added in photoshop to show the area I'm talking about. The xara document which is apparently also getting exported in some way.At least certain other tools see a black background in that area. Not all tools have that problem with the image. For example; photoshop sees only transparency there.
But when I browse the exported *.png files with `Epson print CD', it sees black in that area as illustrated by the screen grab below.The first two images look clean as expected (I'll explain in a moment) but the third (the one that hasn't been cleaned in Photoshop) shows the black background in that area.
The first two were cleaned up in photoshop and now appear clean as expected.So to get a usable image for import into Epson's tool I must:
1) Export as PNG from Xara
2) Open with Photoshop and run thru a procedure where anything outside the outer blue ring in the image is deleted.(Even though PS only sees transparency, if I select everything from the blue ring outward and delete it, saving back to png, then Epson's tool sees transparency there)
3) Import into `Epson Print CD' and print the graphic to a printable DVD.
How can I skip the second step? That is, how can I get a clean export in step one? What is it that some tools are seeing as black background?
View 9 Replies
View Related
Oct 27, 2011
I'm exporting a design for the print shop, and have the following problem:
I have converted all colors to CMYK, and that's fine so far... however, I have imported a few PNGs with alpha channel into the design, and in the PDF output, these create a 'box' around them that seemingly has a flattened RGB version of whatever was behind it + the PNG image.
Same happens with any objects that have drop shadows.
View 7 Replies
View Related
Jan 24, 2011
Running Xara Designer Pro 6.6.6.63205 on win7 64 bit
How to handle this scenario:
I have several photoshop images loaded into xara and trying to make a sensible 4 way arrangement of 4 images. Imagine that one image is outsized compared to the others and needs to be cropped.
I open the original image in photoshop and make the edit, now what is the most expeditious way to refresh/replace/reload... etc the newer state into xara.
I don't see any replace/reload sort of menu item anywhere and have just been deleting the the bad image and reimporting the newer one.
View 9 Replies
View Related
Jan 24, 2011
why I get a hefty blank section on the left side of an Image exported from Xara as a Photoshop file?I have 4 images inside Xara in a balanced arrangement on an 820x586 pg? (artboard?)They are balanced as can be seen in the provided screen grab:
I exported that composition as a Photoshop file and checked the `export only visible objects' box.The exported files have a fairly heft blank section on the left side, as can be seen in the second screen grab:
View 8 Replies
View Related
Mar 15, 2012
I'm tearing my hair out after creating an iPod jukebox style ad (i.e. album cover carousel) where the pix made with the LEFT perspective using Mold tool work fine, but the two made with RIGHT perspective using Mold tool come out skewed rather than moulded after exporting to PDF.
All images are jpegs; I've checked and am doing exact same process on either side. Tried killing the images in bitmap gallery and re-importing - makes no difference.
View 3 Replies
View Related
Jan 26, 2011
I am having problems trying to produce an image with reflections. I have been doing it in the past with Xara4. My procedure is to take a number of images, create copies of them, flip them then add transparency once they are in place as refelctions. These are all placed onto a dark background; reflections are stretching beyond the background at this stage. And in the past if I select all, then Arrange>Combine Shapes>Intersect Shapes then I can have the whole image without the transparent regions of the reflections. My plan is to have the background transparent and save all as a png to preserve the transparency on web. But it doesn't seem to happen in my latest attempts. Instead at the Intersect Shapes stage I get a tiny part of the background as my final image....
View 9 Replies
View Related
Sep 29, 2005
where I can find script/plugin/software for making images composed of images. I'm desperately needing this for an non-profit assigment. Any help would be very much appreciated!
I'm looking for a script, software or photoshop plugin or anything that could help me with this.
What I want to do is this: Out of ~ 1000 pictures I want the software to arrange them into visualizing an image which I have choosen.
View 3 Replies
View Related
