VideoStudio :: X5 Pro - Can't Import DVD

Sep 26, 2012

Workflow-Capture step-Import source folders-in digital media box-start.Then screen goes black and PC restarts without VS running.This has on both occasions I have tried.

View 2 Replies


ADVERTISEMENT

VideoStudio :: Cannot Import Raw Video Clips / Select Import Source Folders

Nov 20, 2010

I'm in the process of evaluating several video editing programs. So far I've used AVS Video Editor, Cyberlink Power Director and Adobe Premiere.With each program I've spent 30 minutes making a quick demo video to see how intuitive it is and how well it performs. Today I downloaded Corel Visual Studio and decided to give it a go.

I've run into a problem straight away.I've tried to import raw avi files.So I'm using the "Select Import Source Folders" screen.When I navigate to the folder containing the files the OK button is greyed out and won't work.It's greyed out all of the time.

View 9 Replies View Related

VideoStudio :: Import From DVD

May 3, 2012

I have copied a recorded TV programme from a PVR hard disc onto a DVD and then copied the DVD onto the hard disk of my computer. When I try to use my trial version of VS XV to import the "digital media", it first shows what I might call empty thumbnails. Then I get a message saying "The file formats of some selected files are not supported". Clicking on OK then produces a message saying "There is no valid clip". I should add that hovering over the empty thumbnails describes the format as DVD+VR. Just incidentally, I have been able to import the clips into PowerDirector.

View 4 Replies View Related

VideoStudio :: Import DVD In X4

Oct 29, 2011

I was not able to import a DVD that I burnt before (VIDEO_TS) into VS X4 to re-edit it. I tried "Capture" ---> "Import from Digital Media" and the screen with the "Source Folder" selection appeared. Clicking the folder (either that of a DVD drive or hard drive" and "Start" resulted in a screen with blank windows for the different Chapters. So, nothing could be imported.

I then tried to Import the same DVD into my old VS X2 and had no problems whatsoever (I had done this many times with VS X2 without a single problem).The edited DVD was then saved as a VS X2 .vsp file. Obviously, VS X4 could not open this VS X2 .vsp file (it said "file mismatch").I checked the manual and could not find why I could not import the DVD into VS X4.In short the questions that I have:

1. What needs to be done to be able to import a DVD (non-copyrighted - self burnt DVD) into VS X4 ?
2. Is there a way to make VS X2 .VSP files be read or opened by VS X4?
3. Would this be feasable: create the VS X2 .VSP to a .MPG video file first. Than include this .MPG file with the other .MPG from VS X4 during the "create disk" stage?

View 8 Replies View Related

VideoStudio :: X4 - Can't Import MOV Files

Feb 25, 2011

I just bought X4 and can't import High Def. MOV files. VS doesn't even see them! how do I import them?

View 14 Replies View Related

VideoStudio :: X4 Won't Import MTS Files?

Dec 25, 2011

I've searched these forums for any "how to's" and found some info, but either it was over my head as to the fix or it delt with different video file formats or error messages.

The short version:

I have a fresh install of X4 on a 64 bit Windows 7 (Pro) and I'm trying to import *.MTS video files into the timeline but keep getting "File format Mismatch 1081:1:3" errors. I've copied the files from the SD card to the harddrive. I've also tried renaming the file(s) extensions from MTS to M2TS, AVI, MPG, and still get the error.

The long winded version:

I had X4 on a 32 bit PC for a long time. Installed Panasonics AE reader software that came with the HDC-SDT750 camcorder. X4 could recognize the MTS files and import them into the timeline. The PC motherboard failed so I got new motherboard and decided to do a fresh install of the 64 bit version of Win 7 Pro on a clean harddrive. Did a fresh install of X4. Then installed all Windows and X4 updates and patches.

When I try to insert a MTS video clip (file) into the timeline from either the SD card or harddrive I get the error message "File format Mismatch 1081:1:3". I can play the video files through windows media player (No matter what I've changed the file extesion to) and the video and sound play fine. I can also insert any other video file into a timeline except MTS files (New or older ones). With X4 up and running and searching for which video file to insert I can see the MTS video preview thumbnail in the file explorer window.

The video clips are 1920X1080 at 29 fms and a bit rate of 16794kbps

I can't find the Panasonic software disk and the best that I can tell Panasonic does not have their software online for download.

I will need some hand holding here so I'll need more step by step instructions than "Get the latest codecs" (Whatever that means)

System info:

Editor: X4 (With update)
DirectX: 11
CPU: Intel i7, 2600K
RAM: 8 gig
HD: 1 Tb
OS: Win 7 Pro
Camera: Panasonic HDC-SDT750

View 7 Replies View Related

VideoStudio :: X5 - Unable To Import DVD?

Nov 7, 2012

I am unable to import a DVD into VSX5.

DVD Properties only show as 195 MB udf file system / It is not copyright protected .It plays OK in Power DVD and Windows Media Player and lasts about 5 minutes .It is a free promotional DVD.

To try and import it into VSX5 I go import file -insert media to library -insert digital media -select drive, -start- when I select or get near the small boxes in the top right of title I or chapter1 boxes with the cursor - the screen goes black and the PC reboots loosing any unsaved data..

If I try to do a screen capture of a paused DVD screen either via print screen-paste as new image, or the dedicated screen capture feature in Paint Shop Pro X- the captured screen area only shows black....

View 1 Replies View Related

VideoStudio :: Will X3 Import From Handy Cam

Oct 13, 2010

I in tend to buy a SONY HDR-CX150. The literature says that for SONY Picture Manager software which is provided Win 7 Premium 64 bit is not supported ! (I know that sounds unbelievable in that most new machine come with that64 bit version).

Does VS Pro X3 will import from that camcorder ?

View 2 Replies View Related

VideoStudio :: Can't Import MP4 Videos

Mar 20, 2013

I have been trying to add an MP4 video to edit in VSP. Every time I select the file, it would tell me that "The file had no video data" when it does.

I tried to install the Service Patch which is said to include imports of MP4 files, but it won't install. It tells me " The installed version of the application could not be determined"

View 14 Replies View Related

VideoStudio :: X4 / How To Import Blu-ray Disc

Nov 29, 2011

I'm using the currently the VS X4 trial version for evaluation purpose. So first I want to modify a BluRay-Disc in 3 Steps:

- import material from disc

- cut some scenes

- re-create disc (or finally burn it)

Unfortunateley I'm unable to finish task one: I didn't found out, how to import the BluRay-Disc: I tried with 'import Digital-Media' but whatever I choose in selection dialog (drive where the disc is located, a dubdirectory from the disc, etc.), VS always respond 'No valid content found'.

How can I accomplish to import the movie materials from the BluRayDisc?

View 3 Replies View Related

VideoStudio :: No Audio On DVD Import In V11 Plus?

Feb 9, 2012

I have been using VS11+ for a few years, and have never run across this problem until now. I am trying to import DVDs recorded on a specific machine and am getting video but no audio. There is audio on the DVDs. I have tried importing both as mpg and as avi (in project properties) but neither works. Although I've been using VS, I am self-taught and not very knowledgeable about codecs, recoding, etc. I mainly use VS for importing video from DVDs, editing, rendering and burning onto DVDs. I am not certain of the make/model of the DVD recorder, but I do know it is new. (I did a keyword search for "import DVD no audio" before posting, but it returned over 2,000 results).

View 6 Replies View Related

VideoStudio :: Import From DVD Greyed Out

Sep 1, 2012

I've done this hundreds of times, but now the "Import from DVD/DVD-VR" is greyed out. It's funny that the DVD I'm trying to import was created by VS about 6 months ago. I did need to wipe the hard drive and reload the software about a month ago. In the "Capture" pull down the "Capture Video" and "DV Quick Scan" are not greyed out but the "Import from DVD/DVD-VR" is greyed out.

This is VideoStudio6 upgraded to VideoStudio 9, so the software is not new.

View 3 Replies View Related

VideoStudio :: DVD Import And Subtitles

May 7, 2011

I am using VideoStudio 3x. I've imported a DVD that contains subtitles -

-when I view the resulting Mpeg file within the program, the subtitles are displayed
-when I view the mpeg through another viewer (ie Windows media player) - the subtitles are NOT visible
-If I burn the mpeg to a DVD - again - the subtitles are neither visible nor available

how do I either - extract the subtitles into an srt file - or make them visible in the other viewers?

- odd thing - when I view the original DVD I can turn the subtitles on or off - but when I try to extract them directly from the source - I get an empty file (go figure)

View 1 Replies View Related

VideoStudio :: Library Import From Pro X2 To X4?

Jan 29, 2012

i just bought V. studio pro X4, before i had Pro X2.

I built a big library with all my films in my x2 version, i took lot's of hour to build it so, I would like to import this library in my X4 pro.

i tried import/export library function but it didn't work.

X4 prompt me a message " missing or corrupt file" when i tried to import my X2 library.

View 3 Replies View Related

VideoStudio :: WMV Import Plays But Can't Been Seen?

Nov 13, 2011

I've imported a wmw clip into the timeline which plays but doesn't display in the screen.

View 4 Replies View Related

VideoStudio :: Import DVD-video To Use In New DVD?

Feb 27, 2011

I forgot I have v11.5 and am getting some good results creating my own SmartScene menus. Can I import DVD-video to use in a new DVD and make minor in/out changes without it reencoding? Otherwise, I'll have to dig out my backup of avi files and start anew since the original source is Hi8 and can't be re-encoded.

View 2 Replies View Related

VideoStudio :: Still Images Not IMPORT X6

May 27, 2013

We are unable to import ANY format of still images to VideoStudio X6. Even the tech was unable to do so while in control of our computer. We've discovered others online at other tech websites complaining about this issue.

View 3 Replies View Related

VideoStudio :: Can Import Pro X4 Library To Pro X5

Aug 11, 2012

If I buy vs pro x5, will I be able to export my present library from pro x4 and import it into pro x5's default library? Will buying the boxed or downloadable version of x5 make any difference in achieving this end? Which is to say, if I download the new x5 version will I lose my present library or will I be able to move it from the old to the new?

View 11 Replies View Related

VideoStudio :: Import Own Audio Files To Pro X3?

Dec 15, 2010

I know how to import video files to th VS program. I would like to know if we are limeted to the default audio files that come with the software? Or is there is any way to import my own audio files from my hard drive to VS? If so, how is this done correctly?

View 5 Replies View Related

VideoStudio :: Pro X3 - Export And Import Errors

Mar 22, 2011

I am creating a video from footage shot on a JVC Everio in PAL HD .tod format. In order to get VS X3 to import these, I installed all the relevant codecs and I have since created seven separate VSP projects for each section of the video. I am currently trying to combine these all together to make the full video, but am encountering some difficulties.

I couldn't copy and paste between projects, it seems, meaning that I either have to recreate each one in the same file (taking ages) or export them again at HD quality then put these videos on the timeline.

Unfortunately, I have tried exporting at HDV 1080i-50i, MPEG2 Transport Stream, "Same as first video clip" amongst others, but every time it reaches the end of rendering, I get the error "File Format mismatch".

View 12 Replies View Related

VideoStudio :: How To Import From Sony HDR CX550V

Jan 1, 2011

I had to reformat my HD and have to go though the process of importing videos to X3. I recall some 'steps' involved, but am at a loss. Was there another program I am to use to import into X3?

View 4 Replies View Related

VideoStudio :: Express Won't Import From Computer?

Nov 15, 2010

I have .MP4 files in folder Z:Camcorder . I can import them into Pro X3, but that program is very cumbersome for simple purposes. So I thought I'd try Express 2010...

To my amazement, Express doesn't know how to import files! I click on Import Computer, check the box for Z:Camcorder, press the Start button, and...Nothing! No folder, no media contents.

Is Express this much harder to work with than Pro?

View 1 Replies View Related

VideoStudio :: X4 Library Does Not Import X2 Files

May 18, 2011

Bought full version of VS Pro x4. But, it will not import saved library files (photos,video and audio categorized) from Pro X2. I get window saying, "Files cannot be imported, maybe number of files is not correct or files are invalidated." Is there any way of getting my saved library files from Pro X2 into the new X4 library? Also got 3 FX volumes of New Blue "Video Essentials" in Pro X2. Is there a trick to importing them into X4? What to do?

View 2 Replies View Related

VideoStudio :: Unable To Import 3GP Files To X3?

Feb 2, 2011

I have a Samsung Captivate and it records video as .3GP files. I can't import this file to VideoStudio X3. I did the latest "Patch" and I'm running version 13.6.2.69. Shouldn't I be able to import these videos?

View 12 Replies View Related

VideoStudio :: Import Corel Presentations X5 To X4?

Mar 3, 2012

Is there a way to import a Corel Presentations project into VideoStudio and then generate a video?

View 3 Replies View Related

VideoStudio :: Import All Individual Clips Into Pro X5

Sep 8, 2012

Cannot preview .MPG files.VSPro5 won’t play MPG clips.

I have only ever worked with AVI files, MOV files OR Video_TS files with few problems and have recently upgraded from CVSProX4 to X5. A family member has asked me to put all his home movies onto DVD. These are in MPG format.

I can import all the individual clips into CVSProX5 – however, the clips will only play when they are selected as the whole project. Selecting an individual clip for editing purposes results in a green screen. However I can manually move the scrubber through every frame within that clip (with an absence of sound) – but will not play that clip. I have converted some clips to .MOV format and can then play (and edit) and listen to individual clips.

I don’t particulary want to convert many hundreds of individual .MPG clips.

View 3 Replies View Related

VideoStudio :: Crash On MiniDV Import

Aug 29, 2011

my problem to Corel e-mail support but after all the work for filling out the form the website showed my a message after submission of the form that the requested page changed its location - nice! After using the back button of the browser (to try it again) all form fields were empty again.

So I am trying here before returning the product. I am using Videostudio Pro X4 with the Sevice Pack 1 and no more updates are found by the internal updater.

I try to import videos from my Sony HC96E MiniDV cam using FireWire. I am importing into a Lenovo ThinkPad system with Core i7 2nd Gen and 8 GB RAM. First of all when using the program's DV Quick Scan method I can see no preview picture in the preview area. Also I here the video's sound for about 1 sec and then it stops. I can use the PLAY, STOP, FF, RW etc. buttons and they control the camera as usual with FireWire and MiniDV cams. But: As soon as I start the importing process with Quick Scan or the normal Rec-Mode Videostudio crashes. Nothing happens - trying to use any of the programs buttons and controls only leads to Windows telling me that this application no longer answers and has to be closed.

This happens all the time. I haven't been able to import a single scene from the MiniDV tape, yet. I also tried another legacy firewire driver but this didn't improve the situation at all. For a test I also installed Windows Live Movie Maker 2011. With this program everything works perfectly: preview is there with sound and importing of the whole 60 mins tape worked flawlessly.

View 8 Replies View Related

VideoStudio :: Ulead 11 Won't Import AVI File?

Mar 14, 2012

I'm running Ulead Video Studio 11, and I have AVI files I have downloaded from the internet. When I try to import them into Ulead I get the following message - ''(FILENAME) is not accessible'' followed by ''These files cannot be added to this project. These files may be of unknown file format, the computer does not have enough memory or the file is copyright protected''

If I right click the files, this is the info I get -

Image
624x352 Pixels

Audio
142kbps
MPEG Layer 3

Video
23 Frames Per Second
1117kbps

Am I missing some form of codec for this particular AVI ?

View 14 Replies View Related

VideoStudio :: Unable To Import From Camcorder

Feb 8, 2013

I have just installed VS X5 and when attempting to capture/import from my Panasonic HDC-TM 700 camcorder am unable to do so. I get two messages either "Use a display environment of 1024* 768 or more", or "There is no capture driver installed on this system". Neither of which make much sense.

I was previously using VS X4 with no problems importing. Should I assume that the necessary driver is on the DVD or do I need to download another driver. I have HD Writer AE installed.

View 14 Replies View Related

VideoStudio :: X4 - DV Codec File Import

Apr 17, 2011

I have received a bunch of files that are named "clip.dv". I can play them using VLC Media Player. It tells me the file type is "DV Video (dv )". Video Studio X4 will not allow me to import the file.

View 6 Replies View Related

VideoStudio :: Import From Digital Media In Pro X5

Jun 10, 2012

I have recently upgraded to VS Pro X5 from VS Pro X2, and have a question about the import from digital media feature. I've ripped my DVD folder to my HD and select Import from digital media. The title and chapter thumbnails appear, but it takes a while for the graphics to appear. Also, when I try to play an associated thumbnail to determine exactly what I want to import, VS Pro X5 enters a non responding state for some time, depending on the size of the video. It does eventually continue and plays the title or chapter. When I select the title or chapter for importing, it does in fact import, it's just the delay in playing the clip that I'm questioning. But when I run the same process on the same computer in VS Po X2, the process is almost instantaneous. Since both programs are still installed, I realize that I cam simply use VS Pro X2 whenever I need to use import from digital media. It's just odd that the earlier version of the program would perform this function better than the more recent version.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved