I had to reformat my HD and have to go though the process of importing videos to X3. I recall some 'steps' involved, but am at a loss. Was there another program I am to use to import into X3?
View 4 RepliesImport RAW from Sony Alpha - Whenever I import RAW photos from my a900 and a700, the color automatically changes. I didn't tweak the import settings.
View 1 Replies View RelatedCan't import Sony RX 100 II AWR raw files ACR 8.0.0.137 Elements 12 says it can import.
View 16 Replies View RelatedPE11 with camera raw 7.2 will not import .CR2 from Sony SX50.(Camera not supported...)Sony sx50 is on the list of supported cameras and .CR2 on the list of supported files!
View 11 Replies View RelatedI have adobe elements 10 with all updates but it will not import .arw (raw) files from my sony rx100
View 3 Replies View RelatedI've been using Lightroom 3 for about 6 months and had no problems at all. Recently I took a bunch of photos in JPG format with my Sony Alpha A350, when I went to import them half of the images were darkened and I can't select them for import. I've always used the same camera and not used any advanced features as I'm still a novice.
View 3 Replies View RelatedTaken video clips with that camera? It uses mpg4 ACE (which is not a codec known to VideoStudio) and my PC tells me that the clips come at 30.05 fps. What can I do now? Why the clips aren't 29.97 fps?
View 2 Replies View RelatedI have lightroom 5.3 running on Windows 7 64-bit. I am unble to import AVCHD video files from my Sony DSCRX-100. I am not sure why, as lightroom 5 supports this video format.
View 1 Replies View RelatedI upgraded from 10 to 11 just so I could do this, but it seems I was mistaken.
View 6 Replies View RelatedI tried to provide as much information in the subject line as possible. I have been keeping my VS installations up to date and so I have VS X6 installed on Windows 8.1. I just purchased a new Sony HDR-CX290 camcorder. I have transferred 3 or 4 video files from the camera to my computer using the Sony transfer software which saves it as a *.m2ts file. VS X6 can open the files, I can place it in my timeline. I can run the split by scene and other edit utilities. I even have gone through the process to test and create a disc without any issue. However, if I try to PLAY the clip in the project window, VS x6 crashes. I have uninstalled, rebooted, and reinstalled VS x6. I have tried reinstalling codecs. The files play without any issue in Nero and Windows Media player. Windows Movie Maker seems to open the files without issues as well. However, I have had my system to make discs via VS for a while now so I would prefer to not have to use a different program. Especially since I have invested in VS x6. I am outside my warranty window so from the sounds of it, I have no recourse to let Corel know if this is a bug or a known issue. I have installed VS X6 SP1 as well and it hasn't fixed the issue.
View 9 Replies View RelatedI used the old video studio several years ago and I have just recently upgraded to this version. I have also purchased a new sony Video Camera the HDR-CX560V. Unfortunately, the software doesn't recognize when the camera is connected via USB cable.
View 4 Replies View RelatedI'm in the process of evaluating several video editing programs. So far I've used AVS Video Editor, Cyberlink Power Director and Adobe Premiere.With each program I've spent 30 minutes making a quick demo video to see how intuitive it is and how well it performs. Today I downloaded Corel Visual Studio and decided to give it a go.
I've run into a problem straight away.I've tried to import raw avi files.So I'm using the "Select Import Source Folders" screen.When I navigate to the folder containing the files the OK button is greyed out and won't work.It's greyed out all of the time.
I have copied a recorded TV programme from a PVR hard disc onto a DVD and then copied the DVD onto the hard disk of my computer. When I try to use my trial version of VS XV to import the "digital media", it first shows what I might call empty thumbnails. Then I get a message saying "The file formats of some selected files are not supported". Clicking on OK then produces a message saying "There is no valid clip". I should add that hovering over the empty thumbnails describes the format as DVD+VR. Just incidentally, I have been able to import the clips into PowerDirector.
View 4 Replies View RelatedWorkflow-Capture step-Import source folders-in digital media box-start.Then screen goes black and PC restarts without VS running.This has on both occasions I have tried.
View 2 Replies View RelatedI was not able to import a DVD that I burnt before (VIDEO_TS) into VS X4 to re-edit it. I tried "Capture" ---> "Import from Digital Media" and the screen with the "Source Folder" selection appeared. Clicking the folder (either that of a DVD drive or hard drive" and "Start" resulted in a screen with blank windows for the different Chapters. So, nothing could be imported.
I then tried to Import the same DVD into my old VS X2 and had no problems whatsoever (I had done this many times with VS X2 without a single problem).The edited DVD was then saved as a VS X2 .vsp file. Obviously, VS X4 could not open this VS X2 .vsp file (it said "file mismatch").I checked the manual and could not find why I could not import the DVD into VS X4.In short the questions that I have:
1. What needs to be done to be able to import a DVD (non-copyrighted - self burnt DVD) into VS X4 ?
2. Is there a way to make VS X2 .VSP files be read or opened by VS X4?
3. Would this be feasable: create the VS X2 .VSP to a .MPG video file first. Than include this .MPG file with the other .MPG from VS X4 during the "create disk" stage?
I just bought X4 and can't import High Def. MOV files. VS doesn't even see them! how do I import them?
View 14 Replies View RelatedI've searched these forums for any "how to's" and found some info, but either it was over my head as to the fix or it delt with different video file formats or error messages.
The short version:
I have a fresh install of X4 on a 64 bit Windows 7 (Pro) and I'm trying to import *.MTS video files into the timeline but keep getting "File format Mismatch 1081:1:3" errors. I've copied the files from the SD card to the harddrive. I've also tried renaming the file(s) extensions from MTS to M2TS, AVI, MPG, and still get the error.
The long winded version:
I had X4 on a 32 bit PC for a long time. Installed Panasonics AE reader software that came with the HDC-SDT750 camcorder. X4 could recognize the MTS files and import them into the timeline. The PC motherboard failed so I got new motherboard and decided to do a fresh install of the 64 bit version of Win 7 Pro on a clean harddrive. Did a fresh install of X4. Then installed all Windows and X4 updates and patches.
When I try to insert a MTS video clip (file) into the timeline from either the SD card or harddrive I get the error message "File format Mismatch 1081:1:3". I can play the video files through windows media player (No matter what I've changed the file extesion to) and the video and sound play fine. I can also insert any other video file into a timeline except MTS files (New or older ones). With X4 up and running and searching for which video file to insert I can see the MTS video preview thumbnail in the file explorer window.
The video clips are 1920X1080 at 29 fms and a bit rate of 16794kbps
I can't find the Panasonic software disk and the best that I can tell Panasonic does not have their software online for download.
I will need some hand holding here so I'll need more step by step instructions than "Get the latest codecs" (Whatever that means)
System info:
Editor: X4 (With update)
DirectX: 11
CPU: Intel i7, 2600K
RAM: 8 gig
HD: 1 Tb
OS: Win 7 Pro
Camera: Panasonic HDC-SDT750
I am unable to import a DVD into VSX5.
DVD Properties only show as 195 MB udf file system / It is not copyright protected .It plays OK in Power DVD and Windows Media Player and lasts about 5 minutes .It is a free promotional DVD.
To try and import it into VSX5 I go import file -insert media to library -insert digital media -select drive, -start- when I select or get near the small boxes in the top right of title I or chapter1 boxes with the cursor - the screen goes black and the PC reboots loosing any unsaved data..
If I try to do a screen capture of a paused DVD screen either via print screen-paste as new image, or the dedicated screen capture feature in Paint Shop Pro X- the captured screen area only shows black....
I in tend to buy a SONY HDR-CX150. The literature says that for SONY Picture Manager software which is provided Win 7 Premium 64 bit is not supported ! (I know that sounds unbelievable in that most new machine come with that64 bit version).
Does VS Pro X3 will import from that camcorder ?
I have been trying to add an MP4 video to edit in VSP. Every time I select the file, it would tell me that "The file had no video data" when it does.
I tried to install the Service Patch which is said to include imports of MP4 files, but it won't install. It tells me " The installed version of the application could not be determined"
I'm using the currently the VS X4 trial version for evaluation purpose. So first I want to modify a BluRay-Disc in 3 Steps:
- import material from disc
- cut some scenes
- re-create disc (or finally burn it)
Unfortunateley I'm unable to finish task one: I didn't found out, how to import the BluRay-Disc: I tried with 'import Digital-Media' but whatever I choose in selection dialog (drive where the disc is located, a dubdirectory from the disc, etc.), VS always respond 'No valid content found'.
How can I accomplish to import the movie materials from the BluRayDisc?
I have been using VS11+ for a few years, and have never run across this problem until now. I am trying to import DVDs recorded on a specific machine and am getting video but no audio. There is audio on the DVDs. I have tried importing both as mpg and as avi (in project properties) but neither works. Although I've been using VS, I am self-taught and not very knowledgeable about codecs, recoding, etc. I mainly use VS for importing video from DVDs, editing, rendering and burning onto DVDs. I am not certain of the make/model of the DVD recorder, but I do know it is new. (I did a keyword search for "import DVD no audio" before posting, but it returned over 2,000 results).
View 6 Replies View RelatedI've done this hundreds of times, but now the "Import from DVD/DVD-VR" is greyed out. It's funny that the DVD I'm trying to import was created by VS about 6 months ago. I did need to wipe the hard drive and reload the software about a month ago. In the "Capture" pull down the "Capture Video" and "DV Quick Scan" are not greyed out but the "Import from DVD/DVD-VR" is greyed out.
This is VideoStudio6 upgraded to VideoStudio 9, so the software is not new.
I am using VideoStudio 3x. I've imported a DVD that contains subtitles -
-when I view the resulting Mpeg file within the program, the subtitles are displayed
-when I view the mpeg through another viewer (ie Windows media player) - the subtitles are NOT visible
-If I burn the mpeg to a DVD - again - the subtitles are neither visible nor available
how do I either - extract the subtitles into an srt file - or make them visible in the other viewers?
- odd thing - when I view the original DVD I can turn the subtitles on or off - but when I try to extract them directly from the source - I get an empty file (go figure)
i just bought V. studio pro X4, before i had Pro X2.
I built a big library with all my films in my x2 version, i took lot's of hour to build it so, I would like to import this library in my X4 pro.
i tried import/export library function but it didn't work.
X4 prompt me a message " missing or corrupt file" when i tried to import my X2 library.
I've imported a wmw clip into the timeline which plays but doesn't display in the screen.
View 4 Replies View RelatedI forgot I have v11.5 and am getting some good results creating my own SmartScene menus. Can I import DVD-video to use in a new DVD and make minor in/out changes without it reencoding? Otherwise, I'll have to dig out my backup of avi files and start anew since the original source is Hi8 and can't be re-encoded.
View 2 Replies View RelatedWe are unable to import ANY format of still images to VideoStudio X6. Even the tech was unable to do so while in control of our computer. We've discovered others online at other tech websites complaining about this issue.
View 3 Replies View RelatedIf I buy vs pro x5, will I be able to export my present library from pro x4 and import it into pro x5's default library? Will buying the boxed or downloadable version of x5 make any difference in achieving this end? Which is to say, if I download the new x5 version will I lose my present library or will I be able to move it from the old to the new?
View 11 Replies View RelatedI know how to import video files to th VS program. I would like to know if we are limeted to the default audio files that come with the software? Or is there is any way to import my own audio files from my hard drive to VS? If so, how is this done correctly?
View 5 Replies View RelatedI am creating a video from footage shot on a JVC Everio in PAL HD .tod format. In order to get VS X3 to import these, I installed all the relevant codecs and I have since created seven separate VSP projects for each section of the video. I am currently trying to combine these all together to make the full video, but am encountering some difficulties.
I couldn't copy and paste between projects, it seems, meaning that I either have to recreate each one in the same file (taking ages) or export them again at HD quality then put these videos on the timeline.
Unfortunately, I have tried exporting at HDV 1080i-50i, MPEG2 Transport Stream, "Same as first video clip" amongst others, but every time it reaches the end of rendering, I get the error "File Format mismatch".