VideoStudio :: X3 - Changing Duration Of Clip Without Affecting Next?
Apr 3, 2013
I’m using Corel VideoStudio Pro X3
I’m making a very simple movie using photos only. I need to change the play time of each photo to vary in duration. When I click on the individual photo in the Timeline view and drag it to extend or decrease the amount of time it plays for, it affects the duration of the following photo, either lengthening it or shortening it. Is there a way to adjust one photo’s duration without affecting the next in line? In other words, is there a way to fine-tune one photo, while having all others maintain their current time properties?
View 5 Replies
ADVERTISEMENT
Dec 15, 2013
I am compiling a slideshow that has a combination of still photos and videos. I have no problem changing the duration for indiviual photos. However, for the video clips, I cannot get the duration to change from the default setting for the entire slideshow. how I can change the duration for a video clip in a slideshow?
View 1 Replies
View Related
Mar 17, 2014
In Adobe Premiere, I am getting an echo when I change an audio clip's speed/duration. The change is from 100% to 103%. I've tried other values in the speed duration but all create an echo.
View 1 Replies
View Related
Aug 25, 2013
I had noticed this when I tried using a loud audio sound effect so I removed it and changed it to something else but I am concerned about this. Here is the situation:
Segment 1: talking head video
Segment 2: black block with animation and no sound
Segment 3: black block with animation and a short sound effect (breaking glass)
Segment 4: black block with the end of animation and voice from the video
Segment 5: back to the talking head video as a continuation of segment 1
The problem I notice is that the sound, in segment 4 is very low as if the video is "recovering" from the sound effect in the previous segment. It is like it adds a fade-in where I don't need one at all.
Is that a normal "reaction" of the audio after a sound effect?
View 2 Replies
View Related
Nov 17, 2012
I have a sequence that's 2 and a half minutes long, but my final edit is 2 minutes. I want to change the duration to 2:05 so I can export out various versions.
View 1 Replies
View Related
Dec 13, 2010
Is there a simple way to change a wall type without deleting the wall and redrawing it in the new style?any time i change the wall type it changes all walls?
View 9 Replies
View Related
Nov 10, 2010
I am preparing a slideshow using photos. Is there a way to change the duration time to all of the photos at once? Say to 6 sec. I can do them one by one but I have a number of photos. I am using Video Studio X3.
View 3 Replies
View Related
Feb 25, 2013
I have produced a movie which is a mixture of mostly still photos and some video clips all in the VS X5 Video track. Having now watched the finished movie on my TV, I now wish to extend the duration of all photos. Is there a way to globally change the duration of all photos?
View 9 Replies
View Related
Sep 7, 2008
I have a 9 minute video of about 100 or so pictures. Each image plays about 5 seconds. I want to increase each picture to play for 7 or 8 seconds. Can I change the duration of each image without going into each image separately?
View 14 Replies
View Related
May 8, 2012
I've been making great progress in learning and using videostudio... but I still can not figure out what the orange tabs are that are called "pause duration". during a clip review I can move them and nothing appears to happen... what would I use them for?
View 3 Replies
View Related
Jan 3, 2012
Is there a way to make the default picture duration in the timeline 'one frame' (1/30th of a second)?
View 2 Replies
View Related
Aug 17, 2012
I'm trying to create a photo slideshow DVD. I've used one of the instant project templates. Populated the placeholders and then dropped my photos into one of the video overlay tracks. I now want to increase the duration from 3s to 6s. I have tried doing so by dragging out the first clip to 6s and by double clicking and manually editing to 6s. The result is the same: I get 3s of random transition between that clip and the next.
What I want to do is create 6s photo clips with a transition between each clip. So, how do I increase the photo duration to be visible for 6s and how do I then drop a transition between all the clips? I don't want to add them manually as there are nearly 200 photos?
View 4 Replies
View Related
Feb 11, 2011
With X2 and prior versions I could use the Make Movie Wizard (?) and add photos and music then match the photo duration to the music. Then I could close this and return to VideoStudeo advanced editor and my clips and music would be on the timeline. How do I do this in X3?
I can see where I can use DVD MovieFactory 7se and do this but I can't return this information to the advanced editor. I don't want to create a video file and use that I want to use the actual photos and music so I can do further editing.
View 2 Replies
View Related
Oct 11, 2011
When I select a clip, it then goes to the start of the clip, how can I sop this happening and the clip stays in the same position when selected.
View 5 Replies
View Related
Nov 3, 2013
Can .MODD files be deleted from Video Studio without affecting the accompanying video file? We are using VS Ultimate X6, and every video file has an accompanying .MODD file.
View 3 Replies
View Related
May 11, 2013
With using superelevation wizard in Civil 3d 2012, changing the lane width is not affecting the resulted values of transion length and run-off length, Is that correct ? ( as civil is using standerd AASHTO tables which assume that lane width typically is 3.6m )
Also, There is only 2 tables for 2-lanes and 4-lanes roadway, Is it for total road width or for one directon only, and what about different no. of lanes ?
View 2 Replies
View Related
Oct 9, 2013
So I have this multipage document I am working on and I needed more pages so I added the artboards I need however then now go beyond the clip board size (see picture below), how do I change that?
View 5 Replies
View Related
Oct 2, 2012
if I can change the exposure or contrast, of only a portion of the take as opposed to the whole take? Also is it possible to isolate a face in one take and only change the exposure or whatever of just the face and not the rest of the scene in the take like one can with a still photo in photoshop?
View 1 Replies
View Related
Mar 18, 2013
I just downloaded the videostudio X6 trial version. For some reasons, some sequences from mpg clips I added to my project seems to be repeating itself for no reason. The bug occurs within a unique sequence and might change the "restart" position while the timeline cursor.
Ex: Original video = Cow cross the road, a car hit the cow then the car explode and finaly a generic
After importing the original video = Cow cross the road, a car hit the cow then the car explode, then the car hit the cow a second time
If I move the cursor right to left a couple of time, it might end up missing the first part of the clip where the cow is suppose to cross the road (replaced by a second car exploding)
It's a single clip and the final display is changing even if I don'T touch anything. I use to be a Ulead video studio user and I never had such problem.
View 10 Replies
View Related
Aug 4, 2013
I've been doing a project using two different cameras, I've done some of it and saved as a .mpg without a problem.Now for some reason I cannot use the split clip tool it is greyed out all the time no mater how I have the clip in the timeline be it set to clip or project.
I made one cut to align two clips now nothing..As I say I've completed three parts of the project without a problem using the split clip tool.
View 5 Replies
View Related
Sep 4, 2013
Working with a 1080p/60fps mp4 file from my GoPro 3. Trying to save a trimmed clip using "same as first video clip" option. Everything seems to work fine but the saved clip plays for a second and then the video freezes but the audio continues. This happens playing the clip with WMP and VSx6. The original untrimmed mp4 plays fine.
View 14 Replies
View Related
Nov 27, 2013
How can I make a white colour clip the same shade as the white vignette filter.I want to place overlayed images with a vignette onto a white clip on the main video track so that they blend seemlessly in X5.
View 12 Replies
View Related
Feb 1, 2013
certainly the topic has already been covered but with the hundreds of responses I struggle to find it, then propose it a new:
how do I put in the time line already been settled for good, a video clip so that the whole time line moves?
Note: I added the other video clips in many 4-track, not using the main track, which is empty.So should I insert a video clip that I had forgotten about 20 minutes before the end, so you have to move automatically all the work (including effects, subtitles, etc), so it all coincides, without having to move the whole hand. ...
View 2 Replies
View Related
May 27, 2011
I've been using Videostudio Pro X4 for a few days now and I've seem to have run into the problem of losing the audio of clips after I have muli-trimmed them. It doesn't matter where I multi-trim them in the timeline, after I have confirmed the trim I lose the audio for the clip?
Let me be clear: the audio for the clips work perfectly before any editing ie. trimming and they are placed in the main video track. The clip formats are mainly AVI, MP4 and DivX AVI and have varying lengths.
View 8 Replies
View Related
Jan 5, 2013
How to rotate a clip through 90deg?
View 5 Replies
View Related
Nov 2, 2010
How do I delete both the thumbnail and the clip from my computer ? The Delete in the library only deletes the Thumbnail.
I want to clear the unusable files from my computer.
View 3 Replies
View Related
Nov 24, 2013
How can I add multiple titles to the same clip, but enter the clip at different times ..?
I am trying to add a title by having "____ production presents..." (fades out) (fades in) "Title of Movie"
View 6 Replies
View Related
Jun 20, 2011
I've been using VS 11.5 Plus for several years with no problem. Recently, I received a new camcorder, a Sony HDR-CX305 which produces .MTS files. I can open the files with VLC and Windows Media Player. For editing in VS, I chose to use proxy files. When I put the files on the timeline and play them in project mode, everything is fine (display & sound). But in clip mode, the clip is played really fast, less than 1 second, which makes difficult the editing.. I tried with smart proxy disabled : same problem.
View 4 Replies
View Related
Aug 9, 2012
I am a Video studio PROx4 user. Recently, I had some old 8mm films transferred to video and now I'm editing them in Videostudio prox4.
I have a few clips where I want to add sound; HOwever, when I drag the sound clip to the Voice track or the music track, the clip remains silent. The original clip seems to have a audio track already. I can split the audio and the delete the track from the voice track, and then unmute it and re-submit the music track I want to use but it somehow doesn't do the trick.
View 5 Replies
View Related
Nov 10, 2011
I'm able to pan and zoom when I put a still image in the timeline, but when I put a video clip, the option is gone?
How do I do what I want to do if I'm simply trying to pan and zoom in a given video clip?
View 2 Replies
View Related
Aug 24, 2013
In videostudio x6, How to zoom and pan on a video clip.
View 1 Replies
View Related
