My logo is made of 9 boxes. I want to create an intro where the blocks of the logo are joining / sliding from different directions outside the view to make one image (full logo image).Like in PowerPoint but in a biot more controlled way.
View 7 RepliesWe have 1 machine in the office that when using super hatch it will not "hatch" the entire area as one hatch, it breaks it into separate image based pieces. The rest of the office, it hatches as one entity so it can be changed easily. Even if we use the group command, it will not group them.
View 2 Replies View RelatedNot the background! The actual image. I don't understand how to use 'opacity'. I move the slider and nothing happens!
Need step-by-step instruction on how to make an entire image appear faint?
Many years ago I made a transparent 3D logo in PSP, I do not have PSP anymore I have gimp, and I want to do the same thing. But I want to make a logo that I can put on any image, a stand-alone png.
View 1 Replies View RelatedI want to make jigsaw pieces.
I have managed to put the jigsaw outline on top of the image ( couldn't upload it, file to big) anyway i don't know how to cut around the outline successfully. Is there an easier where to have jigsaw pieces?
i am looking for a way to make a slide show.
View 1 Replies View RelatedI am using a Flip Slide HD video camera. After importing the videos into Corel VideoStudio, a video that should be 25 seconds long only plays 12 seconds of the video. The big issue is that the rest of the video is not there. It's almost like someone cut part of the video off. When I play the video on the camera and on my desktop with Quicktime, it plays the entire video. After I import the video, it is cut in half again.
View 4 Replies View RelatedI have a series of photos I want to make into a quick slide show. I simply want to have them show in chronological order with some music and nice transitions, maybe in a frame template. I know I can do this in V3 fairly easily and I have done a good bit of video editing with VideoStudio, but I am wondering if there is a wizard that would make something like this faster and get me most of the way there.
There was Movie Wizard in past versions that I never used because I never had anything this simple to do. Is there a recommendation for how to get 90% there in VS3?
In timeline mode I select the beginning of a slide (about halfway through the project), then I import an MP3 file. But, it gets placed at the beginning of my project.
Can I make VS do what I want?
About 6 years ago some people in the Land Desktop group were complaining about not being able to move the text in a linetype so as not to obscure other entities.
how I went about it and a drawing showing an example. Drawing is 2012.
I don't say this is going to replace linetype. I'm also going to see if there's a better way of doing this with Civil Objects. But I've wanted to figure this out for a while and had some down time today. So this is for you to play with if you want. I was looking at my Undocumented Commands file and that reminded me of it since this done with un(or little)documented commands.
If you open the drawing. Select one of the magenta circles (nodes) in the center of the text to activate grips. Select a triangular grip and use it to slide the text along the polyline.
I am making a slide show with Video Studio and would like to create a menu on the dvd with 4 chapters for the main slide show and one special feature type slide show that would be part of the same project that can be selected to play seperate from the main slide, but on the same menu. Is this at all possible to do.
View 7 Replies View RelatedIs there a simple way to align text when creating a list or several entries?
View 3 Replies View RelatedIn a nutshell - I am a seamstress attempting to make a pattern. Well, I have made the pattern - drawn it out on a large sheet of paper. I have manually "cut" it into letter-sized parts and scanned those parts onto my computer (with hash marks so that the parts can be matched back up to make the larger whole pattern).
I have spent a lot of time redrawing the lines in paint.net so they are neat and clean and more even. But then I went to print them and sizing is totally messed up and I am just not able to get my brain around this sizing thing. I need to be able to send these files to customers so they can print them out, put them together and have a pattern.
So, in effect, I have a large image that I want to print in puzzle pieces but they must maintain their *real* *life-sized* size. I'm attaching one of the individual files. What I need to do to it to make it be 8.5" x 11".
There is either deterioration, or some mold on the slide I scanned.
I am having trouble restoring the image, to get rids of all the dark splotches that are readily apparent in the air.
I am just not getting a handle on the clone tools.
[URL]....
Right now - I am thinking the best course of action is to cut out the sky, and reinsert a gradient. I am using Fluid Mask 3.0 right now to see what I can cut-out. But - I'd rather just be able to restore the image
EDIT - I did some major work on the file with Photoshop Elements Spot Healing Brush. Does Photo Paint have anything like it?
I want to emulate the effect of this image without having to resort to using a slide-projector, is this something that can be done with software? I know I can just overlay a bunch of graphic light effects, but what about articulating the random curves of shape and form?
View 2 Replies View RelatedI'm not able to control the dimensions of image slide..Whatever value I use for height and width the image is displayed too small in the tile.
here's my
: image {
key = "sld";
height = 5;
width = 30;
[code]....
Is it possible to correct a digital image from an old scanned slide, which has been scanned back to front, using Photoshop Elements 10?
View 3 Replies View RelatedI just downloaded trial of this and it seems easy and good app. I have still images at the beginning and after that the video starts
[image 3s] [image 1s] [video][video][video][video][video]
I want to make the [image 1s] longer than 1s but cannot drag it's end or modify the second field any bigger. It wont accept.
Also cannot move the video after it because it always remove the gap. So how to make middle image stay longer ?
I have installed X6 and it runs fine. However the option: save as still image is not available any longer. How I can make an image from my video clip?
View 2 Replies View RelatedI am using the Nikon Super CoolScan8000 and Vuescan program to scan a slide film. I am scanning at this setting: scan resolution 4000 dpi. I have to make it a certain dimension that someone has been asking me for. They want the image at Width = 60cm (approx. 23 inches) and 300 dpi.
When I scan at 4000 dpi, I'm not sure what size to make the printed width. I have experimented numerous times and I've had no luck with getting exactly what I want. It seems that when I make the width 60 cm (the height adjusts proportionately) and the dpi at 300, the quality is not that great, which it definitely needs to be because it will be printed at a large size.
PS I am using Adobe Photoshop CS3 and I also have Adobe Photoshop Elements 9.
I need to have an image appear as full screen initially and then reduce in size and sit top left of screen so that it remains visible, whilst other images come and go across the remainder of the screen.
I am using VS Pro X5 Ultimate, 64 bit Windows 7
My project seems to have gotten out of sync. Is it possible to shift an entire single track, such as the titles or music, to the right so that it's in synch with all the other tracks above/below it?
View 3 Replies View RelatedI started to work now with HD clips captured from my new HD camcorder. At the EDIT step, the play back of the entire project is not smooth, there is no continuity of the video and the audio. After the SHARE/CREATE VIDEO FILE step, the play back runs good.
View 4 Replies View RelatedWhen I double-click on a component in an assembly to edit it, the rest of the assembly becomes transparent (or translucent is a more accurate term). Is there a way to create a visual style (or use some other method) to make the entire assembly translucent like this, just as I'm working with the assembly performing all the usual assembly-type operations? For example, I can operate under the "Shaded" visual style, or the "Wireframe" visual style, or the "Monochrome" visual style.
Is there some way to work with a "Translucent" visual style so that I can see the internals of my assembly as I'm placing parts, applying constraints, etc.?
Using VS PX4 file type is MTS.Color correction feature-should the entire clip be corrected prior to inserting into time line as a project?I'm using new cameras and trying to get it right.
View 4 Replies View RelatedIn Photoshop 7.0 is there a way to burn an entire image all at once?
View 1 Replies View RelatedI am trying to drag and drop a photo into design page. But the image is too large. How do I shrink the entire image? Is there a better way to input from iphoto?
View 1 Replies View RelatedWithin my image I am using the Pen tool to select an area that I want to copy. When I define the area with anchor points, close it then select Make Selection, New Selection, it puts the marching ants around not only the area I selected but also the entire image (see below).
This suddenly started happening.
So here's what I've got. I've got a scanned image of the unit patch...the problem is the image shows the thread lines, which equate to different colors. I need to normalize the colors across the entire image...i.e the helicopter should be solid black and the background solid red etc.
Not much of a Photoshop guy but I'm learning OJT it seems. I have both Photoshop CS5 and Illustrator so whichever works best I'm game to use. I've attached the image in question.
I am placing a photoshop image into Indesign. It is an image of a Poloroid picture. When I import it into ID the drop shadow is applied to the entire bounding box or image surface area. I'd like to have it applied just to the "element" or Poloroid image instead.I'm saving it as a flattened JPG and placing it into ID.
View 2 Replies View RelatedAfter I alt/click to select the color for the brush, the entire image moves with the mouse.
View 2 Replies View Related