Within my image I am using the Pen tool to select an area that I want to copy. When I define the area with anchor points, close it then select Make Selection, New Selection, it puts the marching ants around not only the area I selected but also the entire image (see below).
This suddenly started happening.
everytime i use the selection tool it selects the entire canvas and not the image i want. why is doing this? how can i prevent this?
View 6 Replies View RelatedMy move tool does not work other than selecting the entire page. It does not let me to select anything inside the page or drag and select anything inside the page.
View 1 Replies View RelatedWhen I create a text layer, the whole image turns black. If I enter the text blindly, I will see the expected results when I finish and click on another tool. If I try to edit the text layer, everything turns black again.
I am not using the type mask tool. I can select and move the layer and I can blend the layer; I just can't see what I am typing. Using Windows 8
when I try to use clone stamp tool, the entire image is dragged with my curser as I move it. I reset to defaults to no avail.
View 2 Replies View RelatedI have just purchased photoshop elements 11. It has been ok for past 10 days or so but now I have a problem when tring to clone. I select the area by alt+click but then what happens is that the whole picture moves and in fact duplicates itself
View 2 Replies View RelatedI have an image opened in PS CS6 I can see the image I select the Crop Tool The image dissapears completaly from the screen I select any other tool The image reappears again.
View 4 Replies View RelatedI'm trying to get use to this quick selection tool , i have an image i need in the middle of the photo and all round the sides i want to whiten, the tool once draggin down either side selections all the picture no mater what setting i use,
View 4 Replies View Relatedwhen I select the crop tool, my image disappears during the entire crop process. I can only see the image in the preview pane. Why is this happening? I am using the most current version of Lightroom, and I am on a PC.
View 1 Replies View RelatedI have an image open and try to use the liquify tool in filters.It opens and then after attempting to use the tool, It freezes completely. Cant even get out of it or close it at all.
View 1 Replies View RelatedIn Photoshop 7.0 is there a way to burn an entire image all at once?
View 1 Replies View RelatedSo here's what I've got. I've got a scanned image of the unit patch...the problem is the image shows the thread lines, which equate to different colors. I need to normalize the colors across the entire image...i.e the helicopter should be solid black and the background solid red etc.
Not much of a Photoshop guy but I'm learning OJT it seems. I have both Photoshop CS5 and Illustrator so whichever works best I'm game to use. I've attached the image in question.
I am placing a photoshop image into Indesign. It is an image of a Poloroid picture. When I import it into ID the drop shadow is applied to the entire bounding box or image surface area. I'd like to have it applied just to the "element" or Poloroid image instead.I'm saving it as a flattened JPG and placing it into ID.
View 2 Replies View Relatedwhen selecting a silohuete with the poligonal lassoo tool, the area suddenly closes without clicking, selecting an area which I do not desire and making impossible to select the silohuete I want.
View 2 Replies View RelatedAfter I alt/click to select the color for the brush, the entire image moves with the mouse.
View 2 Replies View RelatedI have a picture of a house with the sidewalk at the bottom. I am trying to fill the remainder of my enlarged canvas with "sidewalk". I know there has to be a way, but I can't figure it out!
I did try single row & single column marquee, but it gives me a striped pattern - not the exact sidewalk that the pic ends with.
how to scan an old 1888, 10x12 photo in two halves (left and right), and used the Elements Photomerge to combine the two shots. It worked quite well - slightly askew at the top edge, but the rest of the image appears to be well-stitched - to the naked eye, at least.
After sharpening the image, I went to Guided Edit and began using the brush to "heal" a few of the old marks on the image at full size - that worked well!. Until I moved my brush into the area that had been the left side, that is.. The brush no longer worked. Then I noted that the about 1/3 of the left side was not sharpened like the right side was, either! To test it further, I changed it to a black & white photo. Only that larger right section changed to black & white, and the left part of the image stayed it's old sepia color. I saved the images, closed and re-opened Elements - but had the same results. The left side just can't be edited.
Isn't there a way to edit the entire merged image?
I've saved the image as a high-quality JPEG, and also as Adobe Elements format - but they still won't fully edit. The two are large files - I was thinking that I'd need to save it at high-quality in order to end up with a nice retouched & sharpened 8x10, suitable for framing.
Also, I'm running Windows 7 Home Premium, 64 bit on one laptop, and Windows 7 Professional, 64 bit on another..(I'm trying to get by with the Elements version I have, due to finances.)
CS6 crashes on selecting any tool. It displays a spinning ball and can only be force quit. It developed this fault spontaneously. Where should I start searching? I repaired permissions, cleaned up the whole system, uninstalled and reinstalled Photoshop.
View 1 Replies View Relatedwhenever I try to use lighting effects nothing happens.I saw this video, but nothing appears on the picture to control the lighting .Is there is a tool that I should be selecting before lighting effects ?I'm using photoshop CC.
View 2 Replies View RelatedI'm selecting a new color with the eyedrop tool in CS6 and can see I'm getting a light color with the ring, but I am painting a slightly darker color.
View 2 Replies View RelatedWhen using the patch tool, I make the selection, pick my area for it to patch from and it patches just fine. BUT, the area I selected to be patched is still staying selected with marching ants around it and I have to CTRL-D to deselect before I can patch another area.
Thought it de-selected on old machine and it's driving me crazy trying to retouch some jobs where the patch tool gets a real workout...Am running CS5 (12.1x64) on a new Windows 7 64 bit machine, using a Wacon Intous 4 w/latest drivers.
When I enter into "quick mask mode" and paint in an area on my image that I want my selection to be, then enter out of "quick mask mode". The entire image is selected. It's like a did a "Command A".
Also how do you change the color of the "quick mask mode"?
Photoshop CS6, Mac.
how do you make the entire image black and white except for a selected area?
View 2 Replies View Relatedthere's an invisible 10px border around each object/shape. it's so frustrating when i'm working on small icons or whatnot.i'll try and give an example the best i can... say i have two squares overlapping and are offset from each other by a 5px or so. if i want to select the back square, i'd normally... click on the part of the square i can see. in cs6, if i just click on the visible part of said square, it would select the front square. i have to click at least 10px out from the back square to select it.
View 10 Replies View RelatedI'm 10 days from purchasing a version of CS6 after using CS2 for 7 years. I'm wondering if I have a defective program because the tool icon disappears when I switch tools and then reach for a new brush size. I have to click on my desktop to have the tool appear on my monitor. Also, is there a way of getting rid of the huge sample idicator that appears when you sample a color?
View 5 Replies View RelatedI'm using the Photoshop CC in Windows8 64x as trial and find a curious bug with the Move Tool:Usually I select multiple layers creating a selection with the Move Tool on them, but in this new CC version the tool is selecting hidden layers too. More details: the hidden layer are inside a folder. The folder is hidden, but the inside layers are not.
This type of selection has always worked perfectly in previously versions, and of course, I leave the option "Auto Select> Layer" enabled.
I'm using PhotoShop from CS3 and have had a persistent problem with the polygonal lasso tool. Sometimes when I use it, the tool will only give me a few seconds in between mouse clicks to continue selecting. If I don't keep selecting new points (ie, if I leave the cursor hanging on the drawing with the selection still open), the lasso tool will automatically close itself. when I'm trying to do detailed selection work because it doesn't give me time to find the right point to select to before closing the selection over an area that ends up being useless to me.
View 2 Replies View RelatedI have two documents, both with 300 DPI. The first is a 4x5 image and the second is an 11x17 page. I am trying to drag the entire 4x5 image (it's composed of several layers) onto the 11x17 page and keep it the same size. However, when I drag and drop, the 4x5 image is enlarged to fill the full width of the 11x17 page. This happens even if I hit shift. I recently upgraded from PSE10 where I did this regularly and can't figure out how to do it in PSE12. I have an iMac with OS 10.8.5.
View 11 Replies View Relatedi switched from CS5 to CS6 Extended (Win 7 64bit) and I'm a little bit confused about the select/move tool (V). I have "automatic selection" activated and when I click on a layer, Photoshop often selects a nearby layer but not the one I'm clicking at - often the layer selected is more on top of the layer I was planning to select, but that was no problem in CS5 ... Is there anything I can change in the settings or is this behavior "normal"?
For example - a cursor placed at the marked position selected the white arrow-vector-shape.
I am trying to drag and drop a photo into design page. But the image is too large. How do I shrink the entire image? Is there a better way to input from iphoto?
View 1 Replies View RelatedI have Adobe Photoshop CS6 (part of Master Collection English-Arabic Enabled) installed on MacBook Pro with Mac OS X Mountain LionI went to Preferences -> Type -> chose Middle East , to enable arabic typing but whenever I choose the Text tool, photoshop freezes, and cpu use reaches 130% ( on Activity Monitor it showed that photoshop using 60% of cpu while "fontd" is up to 70%)I don't know why font daemon is consuming that much of cpu, probably facing problems with building fonts models, I left it for half an hour, but no use.
the corresponding windows version, did not freeze, instead just went alittle quirky heavy for half a minute then back to normal and i was able to use text tool and type in arabic normally
