See the snapshot below. There is a point on the timeline when the screen flips around and the video continues. How to cancel this effect? How this effect might have gotten there so that I can avoid having it happen again? The screen makes a 360 degree revolution. The video consists of on image on the main track with 6 pip tracks.
Unwanted Effect
I photograph beach weddings. In my old software, I could remove swimmers and bathers, how in elements12? I am trialing it and cannot see any way to easially remove unwanted objects
View 1 Replies View RelatedI'm working to Move Revit architectural files to 3ds Max, there use Vray for ligting and materials, texturebaking everything and moving it into unity. But I’ve run into allot of problems. I manage to get all the stages done, but there is so much “hands on fixing” that it’s not a viable workflow in RL projects.
My largest problem is removing all unwanted polygons and geometry before texturebaking. From revit you get a lot of faces that won’t ever be seen, like inside walls, in between there floors ect. For instance if I was doing an interior I would like to be able to quickly remove all unseen polygons and exterior faces that won’t be seen. Otherwise texturebaking is a pain. It will texturebake huge areas that won’t ever be seen making the process long and affecting resolution. Manualy removing all areas that won’t be seen is not an option.
I have a dynamic block which consists of a number of hatches, polylines and texts. The dynamic block has the property of being stretched and flipped.
Now the problem is that the normal grips which are being displayed for the normal lines, polylines and hatches are interfering with the stretch and flip grips. Is there a way to make autocad show only the dynamic grips.
I haven't altered the material, at least not consciously. As you can see in the image the dark areas of the terrain have turned into this nasty black mess. The project as a whole has a long way to go, including the material used for the terrain etc
View 1 Replies View RelatedAfter I import a .3ds model, then select the brush tool, the paint either seems to mirror itself on the model or paints the entire y axis. What is happening: If I dab my brush on the model a dot appears symmetrically on both sides of the model. If I use one small stroke the entire y axis on the model gets painted. However I have not found much discussion of the issue I'm having. Most of what I'm seeing says Import > Paint.I'm using Photoshop CC
View 1 Replies View RelatedWhen I view an image at full screen a slight ripple effect appears, I thought it was just an issue with my GPU rendering settings and the ripple goes away when I zoom in on the image.
The problem is this ripple effect is showing up on the printed image.
I designed an image in Photoshop CS6 and brought it in After Effects I wanted to add rain then following CC drizzle effect so that the image I designed looks like the drizzle is hitting the character shoulders and arm area.
As I add the drizzle effect I have some areas around the charcter that the drizzle is also hitting how do I remove the unwanted drizzle effect areas ?I tried eraser tool but that did not work unless Im doing that wrong.
The last thing I'm having touble with, how do I get my audio sound effect ( rain sound ) to play at the same time as the rain fall effect and drizzle effect all at the same time?
When adding a grain pattern effect to an object in Illustrator CS6 I get an odd bevel that surrounds the object. There is nothing in the Appearance window to suggest that there should be a bevel and I didn't add it myself.
Is there some setting I am missing or an easy way to remove the effect? For now I am masking the object with a slightly smaller object but it's starting to drastically increase the size of my file.
When I went to add text to a video sequence in the Title feature, the words "Double-click Here to Add Text" appeared.
Which I did. The text I wanted appeared in the sequence and showed up OK after saving and replay--but so did that "Double-Click Here to Add Text!"
I couldn't figure out how to delete THAT unwanted message--any hints on how to do that?
I've noticed this a few times in different projects after rendering..I always start my clips with the black color insert but as soon as the first video clip fades in, there are 1 or 2 unwanted audio "clicks", "pops" or "scratch" noises.
I then noticed this with a song on a different project as it started first - so I know it wasn't anything to do with my video files.
Lately, I commenced a short film using one of Corel's own titles against the black background and again, as one word entered the screen, a double click, then as the second another click or two!
How do I remove the lens flare effect that I applied to text in my design?
View 4 Replies View RelatedI have been using the Red Ochre "Selection2Clear" plugin to remove this effect but it only seems to sometimes work.
How do most of you get rid of this effect? I can only see this in my game and I am trying to figure out a way to guarantee that none of my PNG artwork has this.
I need to create the effect a cutter cutting through and removing material from an aluminum block. Similar to this below video...
I thought of using an animated displacement map, but that won't produce clean enough edges for close-up shots.
Is it possible to remove certain chapters from the chapter menu without completely deleting them from the timeline if I don’t want all chapter points to be displayed in the menu? Or do all chapter points have to be displayed in the menu?
And is it possible to delete objects from the menu templates, or are the templates fixed?
When creating a menu for a DVD, the first chapter defaults to 00:00:00:00, the beginning of the DVD. I don't want to have that be the first chapter. I want to either remove that chapter or change the time location.
The option to remove the chapter is grayed out and I cannot find a way to change the time say 00:00:10:00 for example. How can I change the time or delete the 00:00:00:00 chapter?
I am trying to remove the original audio track and replace it with a new one. Is the only way to do this by muting the original audio track, or can you delete it completely?
View 1 Replies View RelatedI want to keep the original audio captured with video footage but remove the actual video and replace it with other video footage taken and still images. I'm guessing that this is possible using the overlay track, but ideally, I would like to just remove the original video so that I can use two new images between the main track and other "images" on the overlay track. I have no need for the original video, just the audio. Is this possible? If not, is there any way to insert audio from video onto either a music or narration track scrap the video portion?
View 3 Replies View Relatedhow to remove the route line from the video and only keep the icon moving?
View 1 Replies View Relatedi would like to fade-in a text title.
View 1 Replies View RelatedHow do you add effects on an overlay? I have a overlay which I want to come in using a Barn Door effect but how should I apply that? If I have understood well you can't do that, in that case how do you determine time of the "fade in motion effect" in the attribute tab?
View 4 Replies View RelatedI saw this application that have thousands of effect, will that use in x5?
[URL]
i'm looking for this art effect (colored contours of the baby at 0:20 - 0:30 on this video):
Is this possible with the stock effects or do i need external filter plugins for it?
I'm trying to make a handwriting effect in the sky, as if a pen were writing a name across the sky. Is there a way to do that in VSX4? I've been looking at the effects and don't see a way to do it, so far. Or, does New Blue FX have something like that? I thought Bluff Titler had it, but you actually have to get a different program to do the handwriting, then use Bluff Titler so it's 2 programs instead of one. I've found Cool 3D Production Studio online but can't tell whether or not it does it.
Is there a paint effect or brush that would scroll words across the screen?
I am trying to create a flying photos effect as in these link below. I think it is something to do with PIP filter, but I am not sure how to make it.
[URL]......
[URL].......
I know the above clips are not done using the VS but I am trying to achieve the same result.
I am using vs pro x6 ultimate.
Most filters have the ability to copy and paste the Key fram, but in this effect not. So how do I copy and paste in this this effect
View 5 Replies View RelatedI'm making great progress with my movie making skills! But.... I'm trying to add some transitions to a series of images and I keep getting "there is no gap to apply a transition effect". Trouble is I can't see how I can make a gap.
View 2 Replies View RelatedI'm near completion of a year long video project. I inserted several HD video clips into my VS X4 time line which includes many other HD/SD and .jpg clips along with transitions, music, etc. For effect, I used the tool in VS to speed up two or three of these clips by about 300%. Without the effect, the scene doesn't work so I'd like to keep it this way.
I noticed that when playing the clip in the time line after the effect is added, it plays very jumpy and jerky. Without the effect it plays fine as do all the other clips in my project. I am guessing the effect puts a strain on the system but mostly, my system is fine. However, the hard drive may be the culprit and not able to get the data fast enough to provide a smooth video. Is that possible? My cpu (core 2 quad Q6600 clocked to 3.0 g), new video card, memory, and monitor (HD certified) are all new and well within spec.
My question: Do you think the stuttering video will also be present in the final burn of a Blu-Ray? Or is this just a function of the preview window?
I am using one of the premade text effect that fades-in two lines of text. I want this fadein to (1) last 3 seconds but the title, once fully into view, to (2) remain on the screen for 10 seconds. I just can't figure out this second part.
I can duplicate the original title so the two lines are positioned correctly after the effect ends but then the effect starts over again. I can't get the two lines in the exact same places by recreating them. And if I take a screen shot of the final frame, again, I can't get it positioned so the lines of text are in the exact correct place.
I was just wondering what effects rendering speed the most, the GPU or the CPU?
View 4 Replies View RelatedI'm using X5.
I would like to create a certain zoom effect, but I can't get it done. I'm working with graffiti photo's. I want to show a wall with several different pieces on it. After a few seconds, a photo showing just one of those pieces appears in an overlay. It is placed at the same spot where its background-twin is located and its resized to match its appearance. That small overlay now has to grow in size so it eventually fits the entire screen. It is however important that, during this 'zoom effect', the background photo remains visible.
I have tried to work with the Picture-in-Picture effect from NewBlue, which sounded like the solution. I managed to get the entire thing done, except for making the background visible during the effect. The resized overlay picture is surrounded by a black screen that covers the background photo and I can't figure out how to make that black surface transparent. It ís possible to make the entire overlay transparent, but that also affects the black color in the photo, which obviously messes it up.