I am trying to create a flying photos effect as in these link below. I think it is something to do with PIP filter, but I am not sure how to make it.
[URL]......
[URL].......
I know the above clips are not done using the VS but I am trying to achieve the same result.
I am using vs pro x6 ultimate.
I'm sure this is easy but mind is blank on this. I wish to fly a picture in sit for 2 second then fly out over my main track. I looked in PiP no luck
View 5 Replies View Relateddone a search but haven't found anything.
What is the best way to make 'flat' flag look like a flying one?
making a composite image of a skier flying through the air. I shot at 9 frames per second and want to show all of them on a single frame.
View 4 Replies View Related1. is there a faster way or command to which lines are flying?coz i got this file from a collegue and i was wondering why is it that lines doesnt connide each other... so when i tilt the file into front elevation... i saw all the lines were not on the same elevation.. so what i did is to change the value of Z into zero....
2. does i press something... i used to select the object, pan and drag ( to select and add more on my selected objects.).now if i select the object and use the center of my mouse to drag... point were gone out... so i input first the command then select and drag..
I want to make a curved/ wavy dashed line, picture the trail behind of a bumble bee [my first picture is an example]. The closest thing I have gotten was that I downloaded the dpyplugins6.1 and used the wavy text using the '-----' dashes but instead of the dashes following the curved line they are all parallel and in a wavy fashion [my second picture is a example.]
View 4 Replies View Relatedwhat i want to do is to draw a line that represents a train trace over the ground. I started using the camera tracker and creating a null and a camera and then got lost.
View 1 Replies View RelatedI'm looking to recreate this color toning effect in my own images but I can quite put my finger on it, I've tried almost every possible split toning combo in light room and countless numbers of curves and gradient adjustments in Photoshop and color layers with all of the blending modes, masks, everything.But I still can't get my image to look like these ones. More specifically I'm looking for those brownish-red shadows/ darks with those warmish skin tones. URL....
View 2 Replies View RelatedI have always wondered how people get to add black and white effect in a photograph.
View 2 Replies View RelatedWhat is this effect called? I'd like to do some research into it so I can master the technique but I don't know where to startlooking.
View 5 Replies View Relatedhow this 'soft' effect can be created for photos using Photoshop?I have tried searching on Google with little luck but hoping a PS expert.
View 3 Replies View RelatedHow do you add effects on an overlay? I have a overlay which I want to come in using a Barn Door effect but how should I apply that? If I have understood well you can't do that, in that case how do you determine time of the "fade in motion effect" in the attribute tab?
View 4 Replies View RelatedI saw this application that have thousands of effect, will that use in x5?
[URL]
i'm looking for this art effect (colored contours of the baby at 0:20 - 0:30 on this video):
Is this possible with the stock effects or do i need external filter plugins for it?
I'm trying to make a handwriting effect in the sky, as if a pen were writing a name across the sky. Is there a way to do that in VSX4? I've been looking at the effects and don't see a way to do it, so far. Or, does New Blue FX have something like that? I thought Bluff Titler had it, but you actually have to get a different program to do the handwriting, then use Bluff Titler so it's 2 programs instead of one. I've found Cool 3D Production Studio online but can't tell whether or not it does it.
Is there a paint effect or brush that would scroll words across the screen?
Most filters have the ability to copy and paste the Key fram, but in this effect not. So how do I copy and paste in this this effect
View 5 Replies View RelatedSee the snapshot below. There is a point on the timeline when the screen flips around and the video continues. How to cancel this effect? How this effect might have gotten there so that I can avoid having it happen again? The screen makes a 360 degree revolution. The video consists of on image on the main track with 6 pip tracks.
Unwanted Effect
I'm making great progress with my movie making skills! But.... I'm trying to add some transitions to a series of images and I keep getting "there is no gap to apply a transition effect". Trouble is I can't see how I can make a gap.
View 2 Replies View RelatedI'm near completion of a year long video project. I inserted several HD video clips into my VS X4 time line which includes many other HD/SD and .jpg clips along with transitions, music, etc. For effect, I used the tool in VS to speed up two or three of these clips by about 300%. Without the effect, the scene doesn't work so I'd like to keep it this way.
I noticed that when playing the clip in the time line after the effect is added, it plays very jumpy and jerky. Without the effect it plays fine as do all the other clips in my project. I am guessing the effect puts a strain on the system but mostly, my system is fine. However, the hard drive may be the culprit and not able to get the data fast enough to provide a smooth video. Is that possible? My cpu (core 2 quad Q6600 clocked to 3.0 g), new video card, memory, and monitor (HD certified) are all new and well within spec.
My question: Do you think the stuttering video will also be present in the final burn of a Blu-Ray? Or is this just a function of the preview window?
I am using one of the premade text effect that fades-in two lines of text. I want this fadein to (1) last 3 seconds but the title, once fully into view, to (2) remain on the screen for 10 seconds. I just can't figure out this second part.
I can duplicate the original title so the two lines are positioned correctly after the effect ends but then the effect starts over again. I can't get the two lines in the exact same places by recreating them. And if I take a screen shot of the final frame, again, I can't get it positioned so the lines of text are in the exact correct place.
I was just wondering what effects rendering speed the most, the GPU or the CPU?
View 4 Replies View RelatedI'm using X5.
I would like to create a certain zoom effect, but I can't get it done. I'm working with graffiti photo's. I want to show a wall with several different pieces on it. After a few seconds, a photo showing just one of those pieces appears in an overlay. It is placed at the same spot where its background-twin is located and its resized to match its appearance. That small overlay now has to grow in size so it eventually fits the entire screen. It is however important that, during this 'zoom effect', the background photo remains visible.
I have tried to work with the Picture-in-Picture effect from NewBlue, which sounded like the solution. I managed to get the entire thing done, except for making the background visible during the effect. The resized overlay picture is surrounded by a black screen that covers the background photo and I can't figure out how to make that black surface transparent. It ís possible to make the entire overlay transparent, but that also affects the black color in the photo, which obviously messes it up.
On top of my first video, I just did another Elkhound video.
[URL]......
But, I couldn't figure out how to get a certain effect I was wanting to use. Basically, at the 2:34 mark there is a picture of a lady kneeling down petting a puppy. The very next picture is the same lady with the same dog as an adult. I was trying to get the second picture to fade into the screen and the first picture fades out. So they kind of "morph" if you will. I assume that's possible - but I am just to new to the program to figure it out.
I am using VSX4 Pro.
If I go to Settings>Preferences>Edit Tab>Transition Effect and choose 'crossfade' for the default transition I seem to be be able to set the duration to 1 second, but not less. I would like to set it to .10 (1 tenth) of a second, but it will not let me choose that. Now in the Video track I can edit each transition to less than a second, but I have about 150+ photos want to insert and don't want to have to edit manually each transition between each picture. I would rather just insert them all in one drag and have the transition be set to 1 tenth of a second in the project preferences.
Is there any way to use the "old film" effect, but keep the original colors. I really enjoy the look of the scratches and dust, but I do not want a grey movie.
View 2 Replies View RelatedIt is possible with UVS11 Plus to create an effect earthquake?
Something better than what this here:
[URL]
Any easy way of adding a camera flash effect to a VS project rather than refilming it? I am using VSx3
View 3 Replies View RelatedI am using VideoStudio Pro X4, and I am looking to add the "heat haze" effect to a video I am working on.
View 2 Replies View RelatedI have a project with multiple images dropped on an overlay track. After I've placed them all, I'd like to apply the same fade out effect to all of them at once. I've tried shift/click and crtl/click to select more than one, but it doesn't work.
VSX4
If I add an avi clip into the timeline, I can hear the audio in both clip and project playback. However, once I have added an effect (any effect), the audio cannot be heard in clip playback - it can only be heard in project playback. If I remove the filter, the same thing still happens - no audio in clip playback - only in project playback.
View 2 Replies View RelatedI'm going to buy the videostudio X5, but it seems not many effect and menu I can choice from the application, will that be different since I'm using the trial version. I have the hollywood fx for pinnacle, is possible to use them? if not, where I can get some Videostudio sources?
View 2 Replies View Related
