3ds Max Animation :: Create Effect - Cutter Cutting Through And Removing Material From Aluminum Block

May 22, 2012

I need to create the effect a cutter cutting through and removing material from an aluminum block. Similar to this below video...

I thought of using an animated displacement map, but that won't produce clean enough edges for close-up shots.

View 7 Replies


ADVERTISEMENT

Paint.NET :: How To Create Anodized Aluminum Effect

Mar 27, 2013

good way to make a shiny anodized aluminum effect? I'm trying to make "panels" of various colors that have an anodized aluminum effect. Similar to the shot glasses in the attached image.

View 2 Replies View Related

CorelDRAW Graphics Suite X5 :: Vinyl Cutter Cannot Close Edges When Cutting

Jun 19, 2012

when i cut vectors letters and numbers, its cuts but at every character it does not seem to completely fill the edges. so i always have to use my small nt cutter to do that.

i read the manuals, changed the offset, reduced the cut speed, increased the pressure and even convert to curves before i cut but the problem does not go away. the company where i bought it from is not very useful.

maybe because the machine is chinese i have a creation pcut ct630 vinyl cutter.also in coreldraw, i always use "harline" when cutitng anything is it correct?

Creation pcut ct 630 vinyl cutter

View 5 Replies View Related

AutoCAD Inventor :: Change Spelling Of Aluminum To Aluminium In Material Database?

Feb 1, 2012

How do I change the spelling of Aluminum to Aluminium in the material database in Inventoe.

View 1 Replies View Related

AutoCAD Inventor :: Assemblies Display Welded Aluminum For Material In Part List?

Jun 20, 2013

In our part list we have a column for Material, ipt's display the material and iam's display blank expect for a few instances that display Welded Aluminum-6061(see attachment). These assemblies are all steel and not weldments. What would cause this and how can it be fixed?

View 2 Replies View Related

Photoshop :: Brushed Aluminum / Metal Effect

Jun 1, 2004

I wanted to know if you guys know any plugins for photoshop 7 that can be used to create the brushed aluminum efffect. I'm talking about the ones you find on macintosh g5.

View 1 Replies View Related

AutoCad :: Removing Xref From Block Without Removing It From Drawing Block?

Dec 22, 2011

Drawing A has a grid system Xref-ed into it. It also has a block reference in it, repeated in various places throughout the drawing.

I Xref-ed the grid into the block to check something, and now I can't get it out. This means that the grid now repeats all over Drawing A as well and is generally being a nuisance.

If I try to unload the Xref within the block, it unloads it in Drawing A too. If I try to detach it from the block, it returns this message: Xref [Xref name] has multiple references. Not detached. If I try to detach the Xred from Drawing A, it returns the same message.

How do I unload the same Xref that occurs in a block in a drawing, and in the drawing itself, independently of each other?

View 1 Replies View Related

Photoshop :: How To Create 16 Color Effect When Saving GIF Animation

Nov 19, 2011

How do I create an 16 color effect, when saving my gif animation (save for web and devices) it has an option to lower the number of colors from 256. I normally use the 8 or 16 colors as it gives a great effect to .gif images.

what you get is a Gothic type washed out effect, when you lower the number of colors, when saving a .gif . The overall aim is to have a .gif that starts at 16 colors and at the end turns into 256 colors. How can I achieve this effect.

View 1 Replies View Related

Photoshop Elements :: Create A Line-Map Animation Effect?

Oct 13, 2012

How do I create a Line-Map animation effect? i am trying to highlight a 'Route' on a map.

View 1 Replies View Related

Revit :: Material Display When Cutting With Void?

Oct 6, 2013

When adding an element, say a door, to something like a wall, if there is a void within the door and everything is set properly to cut out a section of the wall, what is the resultant material colour that you see at the cut?
 
I've been trying this out and in the Realistic display mode,  when I have a door with a recess profile around the frame, in brick I see the brick colour, but in plaster I see a grey which isn't the same as the default plaster colour?
  
The recess is 12mm into 12.5mm plaster.

View 1 Replies View Related

AutoCAD Inventor :: Cutting Out Material In Assembly View Using A Second Piece?

Apr 11, 2011

I am wondering if there is a way to use a part of one piece located in an assembly to cutout a portion of another piece located in an assembly when both pieces occupy the same space? 

The situation I'm in is that I've got an L bracket (piece 1) resting on top of a piece representing a concrete block (piece 2).  The L bracket has metal studs attached that protrude into the concrete. Idealy I'd like the mass of concrete located in the same space as the studs removed so that when I generate cross sections everything adds up.

View 5 Replies View Related

3ds Max Animation :: Material Changeover During Animation

Aug 8, 2011

How to change a material during an animation - gotta make a wall see-thoughh from solid over 30 seconds.

View 1 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Removing Nested Block From Main Block?

Oct 3, 2013

I get an AutoCAD drawing from my conveyor manufacturer who have buried a block (tagname) in all of their conveyor blocks.

The only way to remove them is to manually use BEDIT and erase the tagname block.

Is there a way through Autolisp to search all blocks in a drawings and if the tagname block is part of the definition of the conveyor block, erase the tagname block or redefine the conveyor block without the tagname block.

View 8 Replies View Related

3ds Max Animation :: Animating Material Changes On Face Selections

Aug 31, 2011

At the moment I just have sphere with a blue color (material ID 1) applied to it. At specific times and moments, I would like to apply a red color (material ID 2) to specific faces of the sphere under the subobject mode, and stay there.

so that the sphere continuously over time gets red material on its faces. I'm using poly select, and edit poly but its not working. Is there a way to animate this?

Win7 Pro 64bit
I7 3680 6 core 12MB cache w Corsair H80 liquid cooling
ASUS P9X79
32 GB DDR3
NVidia Quadro 5000
3TB WD

View 1 Replies View Related

Photoshop :: Removing Animation From CS6 Documents?

Aug 15, 2013

I received a layered psd from a colleague. In PS, she did some simple animation to show me what she was looking for. I had planned to take the file in to after effects to do the final animation, but when I do, the animation comes in and every layer and comp has a pre-set duration that I cannot change without time remapping.
 
For example, there is a 'pack shot' and some text. The entire animation is about 2 seconds and 15 frames. When I import as a composition in to after effects, every layer is pre-set to 2 secods and 15 frames - even the text layers and precomps. The text layers have that out point marker like comps do  - but as a still layer it normally doens't have a set out point.
 
In photoshop I was able to convert to a frame animation and delete the frames, ending only with where the end of the animation is, but the durations are still there...
 
How can I completely delete animation from a PSD so that photoshop or after effects can't even tell it was ever animated? Is there a simple "remove all animation data" command?

View 2 Replies View Related

VideoStudio :: Removing Unwanted Effect

May 1, 2012

See the snapshot below. There is a point on the timeline when the screen flips around and the video continues. How to cancel this effect? How this effect might have gotten there so that I can avoid having it happen again? The screen makes a 360 degree revolution. The video consists of on image on the main track with 6 pip tracks.

Unwanted Effect

View 7 Replies View Related

GIMP :: Image Effect - Ripped From Back Material

Mar 2, 2012

I want to create an effect on my image where the image is ripped from behind and the ripped pieces are turned to the front like the power that ripped the material came from behind.

An example would be AC/DC Razors Edge album cover.

I found some tutorials but they are just for ripped paper. I want to be able to turn those ripped edges anywhere I want like real paper or some other material in real life.

View 2 Replies View Related

Photoshop :: Removing Lens Flare Effect

Mar 27, 2013

How do I remove the lens flare effect that I applied to text in my design?

View 4 Replies View Related

Paint.NET :: Removing PNG Transparency Halo Effect

Nov 16, 2012

I have been using the Red Ochre "Selection2Clear" plugin to remove this effect but it only seems to sometimes work.

How do most of you get rid of this effect? I can only see this in my game and I am trying to figure out a way to guarantee that none of my PNG artwork has this.

View 7 Replies View Related

AutoCAD 2010 :: Grey Lines Flick White When Working In Large Dwg / Cutting And Pasting As Block?

May 4, 2012

when I am working on a large drawing and/or pasting as a block, all the grey lines (colour 8) turn to white. When I select a grey line, it flicks back to grey, but de-select, and it's white again.

If I toggle on hardware acceleration, the problem is fixed for a short while, and also if I turn it off, it is fixed for a short while, and also if I save, close and re-open it's good untill I paste a block....

I suspect it may be because of my setup and an un tested graphics card:

Windows 7 64 bit Ultimate - running through bootcamp on a macbook pro

Autocad 2012 Lt

Machine Configuration
---------------------
Processor Speed : 2.2 GHz
RAM : 8103 MB

3D Device
---------
Name : AMD Radeon HD 6750M
Manufacturer : AMD
Chip set : Radeon HD 6750M
Memory : 707 MB
Driver : 8.17.0010.1063

Your machine contains a 3D Device that is not certified.

View 1 Replies View Related

Maya Animation :: How To Create A Vacuum Like Animation

Nov 23, 2010

how to create a vacuum sucking animation?

What I need to do is suck little strands of something I made into/thru a hollow a needle.

View 1 Replies View Related

GIMP :: Removing Red Block Pixels?

Nov 29, 2011

I've tried adjusting levels, curves, color balance and the heal plug-in, but I can't remove the red blocky pixels in a series of pictures that look like the one below:

How I could fix up these pictures? Do I need to use a red-eye or noise removal method? I'm using GIMP 2.6.11 .

View 3 Replies View Related

AutoCad :: Removing Attributes From Block

Mar 8, 2013

Remove the attributes from this block.

I just want to be left with the block with all its rotate and stretch features but with no option to add in text when I double click it.

AC Unit_.dwg

View 5 Replies View Related

AutoCAD Inventor :: Title Block - Material Field

Aug 29, 2012

I am using 2013 Inventor.My company uses the .dwg file extension instead of .idw (if that makes a difference).When I make a new .dwg file and insert an .ipt file for my first base drawing ..The material field of the .dwg Title Block is populated.This is something I would like to avoid.When I open iProps in the .ipt drawing and go to the Physical/Material Tab don’t seem to have the option to display a blank (no information) in the material field in the Title Block.The closest I can come to this is to choose Generic, which looks kind of odd.

My company chooses to give all material specs in a note displayed on the drawing.In case of a material change at some point, I do NOT want to have to change the note on the drawing AS WELL AS the Material information in the .ipt iProps.The reason is that, sooner or later, I’ll forget to change both(which will lead to confusion) and possibility lead to making junk parts (made of the wrong material) which will then have to be thrown away (at perhaps a major loss).

View 2 Replies View Related

AutoCAD .NET :: Removing Objects From Block Definition?

Dec 21, 2011

I need to remove lines from a block definition and replace them with LWpolyLines. I see there is a way to Append entities to a BlockTAbleRecord but I don't see a way of removing an entity.

View 2 Replies View Related

AutoCAD 2010 :: Removing Annotation From A Block

Jan 3, 2013

is it possible to remove the annotation from a block with attributes. Make it non annotative?

View 9 Replies View Related

AutoCad 2D :: Removing / Hiding Block Attributes?

Jun 3, 2013

I've just been sent some layouts by our planning team and they have attributes stating the size and name of all the furniture.

How can I quickly hide or delete the attributes as for my purposes the text is irrelevant and gets in the way?

I have tried the BATTMAN command but it doesn't seem to let me delete all of the attributes I have to leave one on each block. Currently all of the attributes are on the same layer as the lines (layer 0.)

View 9 Replies View Related

Maya Modeling :: Create Cross Sections Without Cutting Up The Model?

Oct 20, 2011

how to create cross sections without cutting up the model similar to applications like Autodesk Inventor? Maybe inserting a poly plane into the object and tell Maya to only render stuff in the normal direction of the plane if that is even possible?

[URL]

View 4 Replies View Related

AutoCAD 2013 :: Create Invisible Extrusion Rather Than Cutting Into Object

Sep 28, 2012

Press/pull has been working fine up until now. When I try to press/pull a boundary, it creates an invisible extrusion rather than cutting into the object.

View 3 Replies View Related

AutoCAD LT :: Create Template For Cutting Square Hole 125 Mm On A Side?

Jun 29, 2012

Here's something that should be simple, I want to create a template for cutting a square hole 125 mm on a side.

I have gone into Drawing Utilities and set the units to millimeters. I drew a square 125 units on a side.

In paper space, I selected a template that is 11" X 17".  I set the scale to 1:1. I thought that that would give me a sheet I could print out ledger size with a 125mm square drawn on it, but no, it is not even close.  As near as I can figure, the square is 125" on a side in paper space.

View 5 Replies View Related

AutoCad :: Replace / Redefine Block Removing Attributes

Aug 27, 2007

I'm working with some "dirty" blocks that contain several attributes. I've cleaned the blocks up by wblocking, cleaning, & purging the newly created block. I also removed any attributes within the file, including those within blocks within the file. I then renamed the file and inserted it into the drawing, and did a replace block with another through express tools. The problem that I have is the blocks are replaced with the clean version, yet the attributes remain. Is there a solution to this. I do not want any attributes to remain and the only way I know how to fix it is to replace them one at a time.

Also, I'm using AutoCAD 2004.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved