When I select Create DVD in X4, I get a pop-up dialog that allows me to insert my files into the "timeline" for creating the DVD. I can Add, I can change the DVD type, but I don't know how to continue. The Next button is grayed out, the tab for setup 2 is also grayed out, and there is no way for me to figure out What to do to create the menu and continue.
View 2 Repliescertainly the topic has already been covered but with the hundreds of responses I struggle to find it, then propose it a new:
how do I put in the time line already been settled for good, a video clip so that the whole time line moves?
Note: I added the other video clips in many 4-track, not using the main track, which is empty.So should I insert a video clip that I had forgotten about 20 minutes before the end, so you have to move automatically all the work (including effects, subtitles, etc), so it all coincides, without having to move the whole hand. ...
I am unable to insert a MP4 file from a GO PRO HD camera into the timeline.
i get a " file format mismatch" error message
I have read several posts relating to VS10 & other versions, but not VS11+
i tried changing the file extension to .MPEG-4 but this did not work
file size is aprox 1.7Mb
VS11+
V 11.5.0157.2 Plus
Extra Content Pack
Power Pack
VS11 Patch Eng 122507-03
I have recently 'downsized' to a sanyo xacti vpc-cg100ex camera to lighten my load on holiday! this produces mpeg-4 video files which I copy straight to a folder on my laptop from the SD card.
I can put these into the vs library and tranfer them onto the timeline and add trnsitions, titles etc. however VS is closing down with increasing frequency.(same files on my old xp machine seem to work ok albeit depressingly slowly!)
I have been searching the forum and wonder if I should be converting the files to some other format before doing any editing....does that involve using the share option straight after loading the files, and if so, how?
the properties of the original file are
Type mp4 video,
1920 * 1080,
59 frames/sec, bitrate 252,
audio sample rate 48kh
the properties given for the file on the timeline are
Format Mpeg-4 file,
Vid Type H.264 Main profile video, Upper Field first,
Attributes 24bits 1920*1080 16.9
Frame rate 29.970 frames per s
Audio type MPEG AAC 48000 hz 16 bit stereo
I have not been doing any video at all for quite some time so am definately somewhat rusty.
I downloaded the trial version of VideoStudio 4 Pro to try it out and I like the interface and the ease of use. My problem is that when I capture MPEG 4 files in the timeline and go to replay them, the sound and video are very choppy and the replay skips the whole way through.
I converted the MPEG 4 files to wmv, and the video was smooth but I lost some of the image clarity in the converting process. I don't think it's my computer because the MPEG 4 files play nicely on MediaPlayer - just not on VideoStudio.
working with acad 2012 and not having good luck with links and functionality with excel. tried the links manager,pasting excel/entities. trying to insert separate files in model space in essence creating multiple cut lists for the drawing. Is there a tutorial that goes in depth with this? just froze one file at work, lucked out and opened at home. Each cut list is an individual worksheet, which may be the problem.
View 1 Replies View RelatedI can't find an easy, out-of-the-box way to create a 1920x1080 file from my clips. My clips are shot in HD (1080p) and I can output in 1080 via .mp4, but not .avi. I've been producing in .mp4 and converting through an external tool to .avi, but quality is lost a bit.
I tried using "custom" and user-defined resolution, but the file size was enormous and didn't playback correctly in WMP. When I select the compression types, it locks out user-defined resolutions.
I want to create some MP3 audio files from my videos to use in a new car stereo. I thought VS X5 pro would do it but I cant find a option for it....
View 4 Replies View RelatedGroupe a.png
(45.64 KiB) Downloaded 51 times
I am interested in saving my projects for both uploading to the web and for storing on my hard drive. I'm having some issues
I get by ok with the actual editing part of the VS 4 program. However, I am really struggling to figure out how to create the files in the most efficient format that would balance both quality/file size. I use two HD cams that record in the mp-4 format with h.264 compression 29.97fps. One is a Sanyo Xacti, the other A Kodak Playful. I like to record with the 720p/30 setting, and would prefer to retain the same frame resolution when I create the finished projects. Also these cams record at a rate of about 9000 kbps or so, but would like the finished project to be reduced to about half of that or maybe even less.
OK, so to this point I have experimented in saving my finished project to several different formats. And based on my first impressions, the AVI format looks best (when selecting ffd show and h264 compression). Only there's a problem...the audio is out of sync. About 1-2 seconds ahead of the video I have tried several times always with the same result. If I instead select xvid or h263 or h263+ as an alternative to h264, then everything seems fine. I have also tried creating a movie template with these parameters, as well as just going into the create custom file option and selecting AVI. Can't seem to solve the audio-video sync with h264 as the compression, no matter what I try.
Oh, and now that I've mentioned "Creating Movie Templates" I have another question dedicated just to that.
Why is it that when I save my project using my newly created template, the result is that I end up with several short saved files (portions of the complete project) instead of one single and complete file of my project? Have tried with both an AVI template in h264, as well as a WMV template. Doesn't happen when I don't use a template.
There is any simple method to insert/add a clip on timeline without its sound? I know the methods of locking the audio track in the sequence or deleting the audio track of the clip but I'd like to have some simple shortcut like Option+drag or something similar. There is any?
View 1 Replies View RelatedI'm using VideoStudio X3 and installed SP2, but creating AVCHD files constantly crashes machine.
Using AVCHD videos and overlaying text, then ouputting using preset AVCHD > PAL HD 1440
99% of time just crashes, which makes program unusable!!
I'm using VideoStudio X3 and installed SP2, but creating AVCHD files constantly crashes machine.Using AVCHD videos and overlaying text, then outputting using preset AVCHD > PAL HD 1440
99% of time just crashes, which makes program unusable!!
In order to create a video file in the AVCHD 1920X1080 format, I have the following options in the VSP X6:
AVCHD (1920X1080)
AVCHD (1920X1080, 24P)
AVCHD (1920X1080, 25P)
AVCHD (1920X1080, 50P)
What is the differences between those formats, so I don't know what to choose. My original clips are 25 frames/sec, does it means that I have to choose the 25P?
The capture went just fine when digitizing my tape and the .mov file has both audio and video during playback in both quick time and Adobe Premeir Pro, but when I drag it into the time line only audio will show up. Even weirder it's 4 layers of audio instead of just one audio and one video. This only began with videos that I catured today. When using footage I captured on a previous day it works just fine. What went wrong? Where's my video!?
View 1 Replies View RelatedI'm having a hard time creating MP4 HD files. It's always gone well, but recently it seems that I get to around 99% rendering, and then it crashes. I get the message "The program has encountered an unspecified error and has stopped functioning"
I'm running an older dual core intel T2080 CPU with Vista, nothing fancy. It seems to happen with videos that are around an hour and a half. If I keep my videos to around an hour it will complete the rendering process. I am able to see the final 8GB file that was created, but it won't play as the rendering wasn't 100% finished with the longer video. This whole thing happens on different PC's so it's not my program installation.
Trying to insert a clip on a new timeline form a different sequence in my source monitor. But the audio track does not come through.
I am running the latest CC of Premiere on Windows 8.
I'm trying to insert a block using the "insert dialogue box". However, when I do, if I have the box for "insertion point" unchecked, I get the error "Block Insertion Failed" (picture 1).
If I check that box, I get the error "*Invalid* Block references itself". I have purged the drawing and there are no other blocks in the drawing.
This is based on prior work with Adobe Premiere and switching over to Smoke 2013...
since you were asking for feedback on the editor UI from Mac users...
a) is there a cut button that allows to cut a clip into two at the current marker positions? (e.g. to repeat certain elements)
b) is there an easy way to add extra frames at the beginning or the end of the clip by holding the first or last frame? (very important, but cannot find how to do this). Ideally this would just require dragging the beginning or end of the clip somehow...
c) There should be an easy option to add frames by extending the last or first frame in the case of transitions. Is there one? On Premiere, there's an option for this, makes it much faster to add transitions if there is limited movement in the source material
d) is there a way to auto stretch a clip on insert into the timeline to the selected region? time warp and frame-hold options (beginning, end, both)?
e) why is it not possible to drag clips back into the media hub on the left? (e.g. imported an AAF with a bunch of clips, now want to store some of the clips for later re-use in another timeline or part instead of having to keep it on the timeline)
f) the zooming into the timeline is cumbersome - is there a way to draw a rectangle to auto-zoom into that area? Premiere has a little scroller at the boom to select the zoom level. very useful.
g) for timeline zooming, could you support gestures on the MacBook touch pad? If you push two fingers apart, the timeline should horizontally zoom in. Two fingers together should allow to zoom out. This is actually not just for the timeline. We need this in all views in Connect FX, Action etc. Would make working so much quicker. And it's really standard Mac stuff. (Two fingers without pushing apart could enable panning? And/or space + mouse movement to pan?)
How do I bring up a dialog box with the insert command? after I type 'insert' it asks me in the command line what the name of the block is. I would like to bring up the dialog box so that I can browse to my block library etc.
View 9 Replies View RelatedI'm trying to recreate an audio/visual feature that was built in photoshop/indesign (with hundreds of individal frames, that took hours to complete) in Edge. I've started it and gotten about half way, but I've run into a roadblock and can't figure a way around it.
I need the animation to start onclick with a play button that switches to a pause button. This single button needs both play and pause functions associated with it, and the background image has to change accordingly. I've got the animation to go as far as play onclick, and pause, but I can't figure out how to get it to play again after the initial pause.
I'll need to add in an audio track to go over the whole thing, that will also play/pause. The entire thing has to be timed to the audio track. I have never done much javascript.
Something I haven't met before and can't find in the manual. Not sure what I touched but a red bar has appeared on the timeline, running from the start of the project to the point where I was editing. Now it will only play the project from the start to this point and I can't add a title after this.
How can I clear this red bar?
I am new to photoshop and I am trying to create a cd insert using grayscale pics. I want to put text over them and stuff like that, but I can't seem to figure this out. How do I size this so that it will for into a CD jewel case. I have templates so I know the dimensions but I cant see where to enter them.
View 1 Replies View RelatedHow do you add markers on the timeline? Also, can I add markers to individual clips so I can line them up? Example, have a beat to a music lined up, and on a video I got something I want to align with the beat, can I place a marker on the audio and another on the video?
View 2 Replies View Relatedhow to move everything i have in the timeline over so i can put other things in front of it?
View 4 Replies View RelatedI use another NLE and VSP X6U. One thing that I would like is timeline markers. Why? I do quite a few videos where the transitions have to be on the beat of the music. I do this with timeline markers that are placed on the 'beat' of the music. I can then move the in and out points of a video or image and it will "snap" to the position of the marker.
Also, I can label these markers, so I can use them to "remind" me of what I want to do between them.
WHen i try to add MP4 file using videostudio pro x 3 in the timeline , i get this error below . THe file type is MPEG 4 media file.
When i convert it to WMV file , it works . videostudio can have a patch and fix this because it takes me so long to convert from MP4 to WMV . This file type is now Windows Media Movie.
I'm working on a short project on Corel Videostudio X4. I have been working on the timeline, but can't figure out how to move the timeline around. For example, is there a way I can take the whole project and push it forward 30 seconds so I can stick another clip in?
View 4 Replies View RelatedI have added some pictures too the timeline(slideshow) and i want too add some pictures between items on the timeline. i would like to move items too the right side, including music, text that is already placed underneath the pictures.
With adobe premiere this is really simple, i have watched about 100 clips at you tube but can't find it. I have tried using the CTRL key but than i need to select each item seperate...way to much work to select hundreds of items.
What does an orange line between the timeline and the chapter / cue marker line indicate. (see picture below).
I am halfway through a project and suddenly notice this orange line that wasn't there before. I've looked through the documentation and see no mention of its meaning, and what I did that triggered it to show up.
Is there a way to combine 2 or more projects together on a timeline, such a way that you can see/adjust all clips, overlays etc from each of them?
View 2 Replies View Related