"An internal error occurred when overlapped buffer is full."
That is the message I am receiving when I try to make my project into a video or audio file.
I have two audio tracks which have only two effects added to them.
What is wrong?
I've burned like 9 DVDs without issue using ulead. I'm now burning another, but have wasted 4 DVDs since I am getting a dialog, right near the end of the actual burn for:
"Data buffer underrun. The computer may be too busy with other tasks or may not have enough power to keep the specified burning speed. [534:-2147216284:0]"
All movies are about the same length (120m) and all settings are the same. My computer is a 4.6Ghz dual core AMD with 2G RAM. I'm writing to a HD with 200G free; local disk has 120G free. No other apps open.
This is the first time I've received this error; I've totally recreated a vsp project and everything, but I still get this error. I've modified so that the burn is only at 4x, which is shows is the minimum? The option to enable buffer underrun is disabled and I can't select it. I'm doing a two-pass conversion just like all my other successful burns.
Need macro to merge and join all overlapped lines after flattening so I end up with a basic flat 2D outline.
View 1 Replies View Related[Illustrator CS5]
I need to copy and paste path segments in order to create uniform serifs for letters. (For example, specific path curves).
So imagine I have a horizontal segment and a curve segment. I mouseover each one seperately and I can see they have anchor points where I want them to merge afterwards. I drag one towards the other to make them intersect. Then I try to select both anchor points and press CTRL + SHIFT + ALT + J, but it displays this error: "To join, you must select two open endpoints. (...)" Which makes me think I'm not really selecting both anchor points when they're overlapped.
I have the idea that they can't overlap, because my path segment won't detect the anchor point in the other path. They're just visually intersected but not connected.
If I try to join them when they aren't overlapped, they will join but distort the original shape of the path segments. I select them both with the Direct Selection tool, pressing Shift to add the second anchor point to the selection, which won't work when they're overlapped because Shift + Clicking will deselect the anchor that seems on top.
I also tried various shape modes in pathfinder and nothing works.
How can I properly overlap and join / merge them?
(I'm using a white fill so I can see the shape forming as I add more anchor points so I'm sure they aren't joined).
Can I run Video Studio Pro X4 at other than full screen? While working on a project, full screen is fine. But, once I start rendering I'd like to have my PC back and do other things and have VSP render in the background. I opened the preferences dialog, could find nothing relevant. Doesn't appear to be the normal windows shrink button in the upper-right, only minimize which takes VSP totally off screen.
Running Win XP SP3.
I use the Frame Number option quite a bit when I make a Preview and the Viewport details found in the upper left of the Camera viewport (eg: Camera04, Hidden Line) overlap the frame number.
Any way to either exclude the viewport details from Preview or move the Frame Number down so these two pieces of info don't overlap?
I download avi files and then edit them in Videostudio X4. THe avi's are always from different resolutions and framerate.
When i play the converted or edited avi files on my mediaplayer on a Widescreen tv then the video is played may time not full screen. Sometimes it is on top and sides filled with black borders.
I would like the video's always be full screen on tv (off course with good quality).
My question is: how can i see in Videostudio if the video can be played full screen on tv?
Let's say i have 2 video's: divx / xvid 576 x 320 at 25.000 fpsec and 512 x 384 at 188.900 at 25.000 frames per second. Would these files be played full screen on the tv?. How can i calculate that it is 4:3 or 16:9 and what must the preference be in Video studio itself: 16:9 or 4:3?
I have made a movie and its 2 hours long,i knew trying to save this to a 4.7 gb dvd I would lose a little quality, well I'm impressed with the results, but for some reason the finish movie isn't full screen, now I know its saved at 4:3 not 16:9, and with 4:3 I expected to have space on both side of the screen when watching it on a TV or computer . But I also have quite a bit of space on the bottom and top as well. Here the properties of my project.
View 3 Replies View RelatedFew months back i switched to HD from SD and then i had many problems with rendering. Finally i had selected "IPAD HD" for rendering. Thats not full hd. But i want my videos in FULL HD. What combination will be best for it?
My video's specs are:
Video
.mp4 files
1920x1080 Frame size.
Data Rate: 15055kbps
Frame rate: 29 frames/persecond
Audio
Bit Rate: 254kbps
Stereo
Audio sample rate: 48khz
What setting will be good for rendering in 1920x1080?
I have been using Ulead Video Studio 6 for years creating slide shows and burning them to DVD. While playing DVD, made in Ulead Video, the slide show would display in full screen on any TV (for example a horizontal picture would be displayed in full screen and vertical picture would be displayed from top to bottom exposing some black background on the sides which is OK). Now I am using Video Studio Pro X3 and after I create a DVD there is a black background around each photo during playback. In other words, each photo seems to be slightly reduced in size or there is a black border around it during playback of DVD.
View 7 Replies View RelatedI think X4 is somehow creating temp files that gradually fill up the hard drive. Actually not so gradual: approx 3 GB in only a couple hours of editting.X4 crashed this evening, then wouldn't start again. I noticed the HD was full. I deleted 3 GB worth of microsoft stuff I wouldn't be using. X4 would then start, and I continued on editting, till it crashed again. Now the HD is full again, so I assume there is 3GB worth of stuff created since the last crash.
I have a 60 GB main HD where windows lives, and another 1000GB drive where all my videos live. Are there files created by X4 that can be safely deleted, even before the end of the project?
A customer brought me some DWG plans, five files' worth. He wants pricing on cutting it out of wood. The cutting part won't take long, but fixing the file will. I could see that there were multiple lines because some lines were thicker.When I select one of the thicker lines and delete it, it's gone. So I knew there wasn't a second line below it. Then I tried Ctrl-K, to break apart the curve. Wow, some of the lines had 23 copies! So I would hold Ctrl, de-select one of the lines, then hit the Delete key to erase the other 22. This will take a lot of time to clean up like this. Do you know of an easier way to remove these excess curves?
View 9 Replies View RelatedHow to clean screenshots that contain text or other stuff overlapped in an image.
Here's an example:
I'd like to know if it's possible to remove the overlapped bits of screenshots in the upper and bottom left corners and the text in-between using GIMP. The second picture is merely for reference of the material missing(I'm not sure if it can actually be used because the quality is not the same, and I believe the colors are a little off). And if it's indeed possible, how it can be done.
I have a video clip from you tube that when I load it into VS it only recognizes 2:20 minutes vs. 2:50 minutes that shows in windows media player. Why doesn't it recognize the full length?
View 1 Replies View RelatedWhen my HD clips (m2ts) are located in the timeline, they doesn't appears in the full height of the timeline, just about half of the height.
View 2 Replies View Relatedwhenever i try to capture a full screen application, say like World or Warcraft, I select the program that i want to record, and when viewing the recording, it shows up black.
View 4 Replies View RelatedMy exported videos don't seem to be full screen. My source data are jpg pictures in 4272x2848 resolution (Aspect Ratio of 3:2) turned into time lapse videos. I have tried exporting in MPEG-4 and WMV Screen capture 1920x1080 (1.777:1) and the resulting videos have black bars on the sides because of the different aspect ratio. I would ideally like to have an imported video file that is the same aspect ratio as the source pictures, something like a 1620x1080 (3:2). Can I pick a custom resolution for exporting? Is there a way I can crop the black bars out afterwards? Can I apply a cropping filter to the current project before exporting?
The "Enable Widescreen" setting had no effect on the videos, they came out identical.
I've been using ulead vs 10 and now corel vs x4 pro to interface and record video from a microscope. I produced a DVD for microbe identification which has been purchased by 100s of amateur scientists and organic farmers. I record direct to hard drive via firewire with a Sony HD camcorder with a remote control 10X analog zoom; 37 mm lense. It is a lovely old camera.
1/ The recording controls are not accessible when in full screen mode which means I need to start recording, open the full screen then focus and start tracking my organisms with the microscope stage controls. To stop recording I need to go to small screen again first. Has this function been changed in the x5 version?
2/ When using the HD settings on camera and software, there is a delayed reaction to the computer so this makes tracking the microbes impossible. I doubt this is caused by lack of RAM I have 24 GB on a windows 7 64 bit.
3/ Occaisionally when I am observing and/or recording, the transmission freezes. I think this is likely something trying to run in the computer....Perhaps with creating a dedicated profile where I could stop any of this interference.
4/ I've been using an external USB 2.0 hard drive for storage but it is too slow. I've been thinking of a SATA external drive or USB 3. Does any huge advantages for the extra money to get a SATA external drive over USB 3.0?
I want to re-edit -remove some parts, adding a title- a fullhd VSX3 rendered file which looks and plays perfect. I never have problems with VSX2/3 even when re-editing. This time, it first takes seconds before it opens in the preview window when I click the library tumbnail. It freezes (with created or without smart proxi) for several seconds when I try to cut, or whatever on the timeline.
It only gets somewhat better when de-selecting "audio while scrubbing", but remains still much more "freezy" than all my other (rendered) files. It's a ~2.5 Gb AVCHD file rendered at 18Mb/s VBR in VS. The only thing what is different is that it contains (pre-converted to AVXHD) SD parts from a JVC camcorder (.mod), but it all plays back flawlesly in several HW and SW players.
After realizing the Mercalli runs better on single clips, is there a way of editing a clip within a project and saving (after "creating" this clip only) and then reinserting into the project?
View 4 Replies View RelatedI need to have an image appear as full screen initially and then reduce in size and sit top left of screen so that it remains visible, whilst other images come and go across the remainder of the screen.
I am using VS Pro X5 Ultimate, 64 bit Windows 7
To get a full body shot, I have to turn my camera on its side. I start with a 16:9 aspect ratio. After the shots are loaded into the program, the figures are always a little distorted to the short side. This is always after I rotate the video 90 degrees so that it is upright. Is there a solution to this problem?
Also, sometimes when I use a still image in the video track and a video in the pip track, the still image won't fill up the entire screen. This situation also occurs when a video has been rotated 90 degrees.
My VS12 on Windows 7/64 machine with 4G RAM has slowed down dramatically when I have lots of clips in the libraries. I have several libraries based on themes, each with about 10-20 clips of 10-20sec duration (PAL MPEG2 clips, no HD). Loading into the libraries from the external USB2 hard drive is extremely slow. With each clip to load VS12 gets stuck for a while and until all clips are loaded it takes a long time) And when you want to move the scroll bar in the library it does not move, you have to click several times and the mouse just shows the blue ring for a long time and you get Windows to react that VS12 does not respond. When I try to enter a new library it will only show after I click "Close" several times and with a long wait.
When I delete most of the libraries VS12 runs a bit quicker.
All other programs (for instance Firefox and mail) run well and with normal speed (normally I have them closed when using VS12). So it clearly seems to be in VS12. I used VS12 the last time in June to edit a video and at that time it worked well, with normal user friendly speed. Since then I only updated all Windows, Adobe, Quicktime and other important program updates, but nothing else. Also Direct X is updated to the latest version Microsoft issued in June 2010.
I experience the same situation both on my Windows 7 and Windows XP machine (XP having less process power and less RAM, only 2G, but worked perfectly before). Somehow the impression is that the latest Microsoft NET Framework patch could have caused this, but I am not sure and I would not like to deinstall this patch because of the security risks.
I have canon legria HFR 106 [URL]......
Problem is setting of the best resolution:
-FULL HD is making these horizontal lines (every other pixel line) if something moves in the picture so its not good
- lower camera setting makes the resolution to 1440x1080 which is 4:3 !! that's not the ratio of today (and youtube) and i didn't even realize it because video studio has 16:9 project settings and the ratio of outputted video seems right?
- Compared these: video 4:3, project 16:9, still images from another camera 4:3 -> fail
what do you recommend, is there a way to get full resolution better without those lines or other way to 16:9 ?
2. Also only recent and fast opening player to play those camera raw videos (.mts) is VLC-player. Is there a way to get it open those videos in zoom mode of 50% or 33% and not 100% they goes over my screen every time!
how can i get the full hd 1080 option for youtube on vs3
i have a full 1080i camera and yet when i want to upload this hd version to you tube it only offers up to 720 in vs3
I trimmed a wav audio file with the little yellow markers in the clip by placing the markers where I want them and using the scissors, then saved it, but when I drag it down to the timeline it comes down as the original long file.
View 2 Replies View RelatedI am familiar with GIS but I am new to AutoCAD Map 2012.
I have 140,000 lines and 20,000 points.
I would like to have all points closer than 1 meter to a line.
This is what I tried to do:
buffer the lines (_mapfdobuffercreate)overlay points and buffer (_MapGisOverLay) to get all points in the buffer area
This works well with a small amount of data.But in step 1 I have to select all lines (140,000) with the mouse. When I try to select all lines with the mouse AutoCAD Map freezes after some minutes. Is there a way with AutoCAD to work on a “layer basis” and not on a “selection set basis”. Other GIS (ESRI, Quantum, …) work with a complete layer.
In this analysis I work with FDO Data (shp,sqlite,sdf). I have geometries, but no attribute data.
Is there a way to prevent the render window from clearing to black before rendering a new frame when using the scanline renderer? Several versions ago Max used to leave the old image up while updating and its easier for me in some cases to see changes when the previous frame is still there and updates as the scanline renders down the frame.
View 6 Replies View Related(Ulead Videostudio version 9). I am trying to compile a number of clips of tv into 1 programme, the problem is that some of the clips are not full frame, but half size widescreen etc. Is there a way in video studio to convert all of these clips to full frame etc, so the whole programme looks the same or do I use a different piece of software. Another question, what is the max lengh of dvd output you can use the software before it loses picture quality, some of my recent productions have been poor quality picture wise, even though the input picture quality has been high.
View 1 Replies View RelatedI am building a highlight video for my son who is a wrestler. I had the idea at the beginning to zoom in on one of his sr pics towards his eye. I want a the video to start in his eye but as zooming is complete it will end up full page video.
View 12 Replies View RelatedI would like AMAP to perform a BUFFER operation on a certain SHP, so the resulting buffer polygons would get the table attributes from that original shape, and also be exported as a SHP.
It is mandatory that a buffer polygon will have the same attributes from the original SHP line, including its FeatID.
Is it possible?
